Brand New 300zx brakes, KKK K26 T3 turbo, S13 Chuki Front End, Free stuff too!!

[chineseb0i]

Got lots of stuff for sale and some free items as well. I prefer local pick up but willing to ship at buyer's expense. Located in San Rafael, California.

S13
-Rear upper control arm $10 obo for the pair
-Manual door panels in brown (clean) but has holes for tweeters ($40 for the pair obo)
-Pair of doors in gold color (no panels, window, or side view mirror). $20 per door OR $35 for the pair.
-Various random interior pieces in brown (A-pillar, glove box fuse panel + door) $5 a piece
-Power seatbelt computer module (found underneath the arm rest) $10 obo
-Evap canister $5 obo
-Brown dash with 1 long crack on driver side. Other than that the rest of it is good. $20 obo
-Rear coupe tail lights (pair). No cracks. $30 obo for the pair.
-Passenger side coupe tail light. No cracks. $15 obo.

-S13 Chuki (91-94) front end..SOLD

Other parts
-S14 Center arm rest in black (came off a 95 s14 SE) $10
-S14 stock headers/exhaust manifold $20
-S14 passenger side window (slightly tinted?). Came off a 1995 SE. $20
-S14 vent and heater core assembly $15 obo
-Infiniti Q45 MAFS (mass air flow sensor) with pig tail plug $35 shipped.
-B14 (1995 to 1999 Nissan Sentra/200sx) rear strut bar. Brand new. Free Install! $20 obo.
-KKK K26 turbocharger off an older Audi. T3 flange. I hear these are good for 300 hp range. Very little to no shaft play. $125 obo

Probably got some other random parts lying around as well. Open to any reasonable offers.

[Briou]

would you sell the driver's side fender?? if so price shipped to 39576??

[mojos13]

Do you have a chuki-lip to part out....lmk

[chineseb0i]

Hoping to sell the entire front end. I have 1 person interested in both fenders + fender extensions. Total price shipped to St. Lois will probably be about $100.

No chuki-lip unfortunately.

[Briou]

ok so you are selling one fender for 100 shipped or not??

[chineseb0i]

Hoping to sell entire front end as a set. If I'm not able to sell it in a few weeks I'll probably part it out.

[adicarlo]

do you have pictures of the brake calipers?

[chineseb0i]

Yes I do. Please note, rears have been sold. These are brand new as you can tell (no dirt/oil/fade/cracks/chunks missing).

http://farm8.staticflickr.com/7061/6907070509_0e8d8fc062_b.jpg

[chineseb0i]

Here are all 4 rotors on top of their original boxes.

http://farm8.staticflickr.com/7189/6907070601_86dc7f2005_b.jpg

[novita1021]

Pix of the turbo?

[chineseb0i]

Pix of the turbo?

See pictures here. This turbo is good for pushing over 350 hp easily from what I've researched online (probably at least 300 hp on the SR and/or KA)

KKK K26 Turbocharger - a set on Flickr (http://www.flickr.com/photos/5[email protected]/sets/72157629587714581/)

[Zenki_cb]

What size are the brakes?

[ah_Ra]

need the passenger side fender shipped to 30349

[chineseb0i]

What size are the brakes?

Brakes are off a 92 thus for the 30mm (aluminum caliper).

[chineseb0i]

http://www.infoocean.info/avatar1.jpgDo you have a chuki-lip to part out....lmk


Sorry, no chuki lip.

[chineseb0i]

Prices updated. Bumper #1.

[Loki240SX]

Driver's side front fender still available? If you're willing to sell just that, I'll buy it right now.

[Nicelyphe]

Bumper available for shipment to 18018? Please PM me. Thank you!

[sr20comic]

Money sent for rotors. Thanks a lot

[chaosxsteve]

How much for just the chouki front bumper with support and stuff shipped to 92553? Pm please if available

[PrimeDirective]

I'll take the S14 center arm rest if there are no cracks/ broken tabs. Can you ship to 98512?

[JDMrhd_180sx]

temping for the 30mm z32 brakes... if you have it still next week i'll buy it! does it come with the hardware?

[chineseb0i]

Money sent for rotors. Thanks a lot

Payment received. Once it clears rotors will go out via USPS priority mail. Thanks.

[chineseb0i]

Driver's side front fender still available? If you're willing to sell just that, I'll buy it right now.

Fender available but not wanting to ship. I've heard horrible stories about UPS, USPS, FedEx damaging fenders. Sorry (don't want to risk it).

[chineseb0i]

I don't believe there are any broken tabs (will have to double check). Assuming everything is good, I estimate shipping to be around $10-$15 or so.

I'll take the S14 center arm rest if there are no cracks/ broken tabs. Can you ship to 98512?

[chineseb0i]

Bumper available for shipment to 18018? Please PM me. Thank you!

Sorry, not really wanting to ship the bumper (too big and too much of a hassel).

[chineseb0i]

temping for the 30mm z32 brakes... if you have it still next week i'll buy it! does it come with the hardware?

No hardware, sale pending at the moment. If it doesn't go through then they're available next week.

No clips/pins/hardware. Est. prob. be around $20 for those or even less if you get them used/from junkyard.

[chineseb0i]

Last bump (bump #2).

Now taking offers on the front end parts. Hoping for local pick up (not wanting to find a huge box and pay an @$$ load of money to ship unless you're willing to pay for shipping). Shipping would be from 94903 (san rafael, ca). You can estimate using UPS/FedEx/USPS/etc.

[chineseb0i]

All kouki front end parts sold. Still have few side markers lying around.

All 300zx brakes (calipers/rotors) sold as well.

Feel free to throw me an offer on any of the left over items as they are just sitting in my garage collecting dust =)