Are there any 15x9 or 15x8.5 wheels for 4x114?

[Vetal]

I couldn't find 8.5 or 9" wide 4-lug rims with decent backspacing, do they exist at all? I could only find 15x9 with 0 offset (5" BS) but that would stick out a lot.
I don't want to order 15x10" Welds as it is a bit overkill (both price and weight).
Want to run 26x11.5 Streets or 26x10 ET Drags on them, largest I can fit to S13.

[wangan_cruiser]

i had an eagle rims for 4x114 lol 15x8 -8

[Vetal]

Did stick out half a yard probably :)

[slow92]

weld draglites....these are very popular with the early 90's mustangs because they are 4 lug cars. Usually you can find a set of 15x8s used for a very decent price. Plus, they will fit our cars.

[AnthonysSilvia]

my centerlines are 15x9 4x114

[Vetal]

my centerlines are 15x9 4x114What offset/backspace? I thought they only make some stupid negative offset in 4x114

slow92, 15x8 are plenty but I want a bit wider for 26x11.5 ET Streets. Hell, not much sense in upgrading my 15x7 to only 15x8

[LongGrain]

centerlines were offered in pretty much any size, much like CCW or diamond racing. Its just that you don't see the "normal guy" sized ones often, because the hellaflush fanboys don't scoop them out of junkyards as often as the 15x8 -30 etc...

[Vetal]

Is it that I can't search? Somehow I fail to find all those wheels in 8.5-9" and decent backspacing...

[Vetal]

After more searching I still couldn't find anything between 8.5 and 9" rims. Anyone?

[Vetal]

I noticed that Weld Draglites exist in 15x9 with 5.5" BS (ET12 offset). pricey though...
I wonder if that backspacing would be fine for S13?

[nismobenzo]

xxr comes in 15x9+0

[Vetal]

Saw someone's pics with 15x9 ET0, they stuck out pretty far as far as I remember

[whiterps13]

God damnit people cannot read.

[Vetal]

Guys what do you think of these?
2 New 15X8.25 4x100/4x114.3 DRAG DR-44 Wheels/Rims | eBay (http://www.ebay.com/itm/310386915166)
15x8.25, +25 offset, look good and are cheap (and probably work with stock lug nuts)

[Vetal]

Guys what do you think of these?
2 New 15X8.25 4x100/4x114.3 DRAG DR-44 Wheels/Rims | eBay (http://www.ebay.com/itm/310386915166)
15x8.25, +25 offset, look good and are cheap (and probably work with stock lug nuts)Any thoughts? :)
Here's a pic: http://www.discounttiredirect.com/product/wheels/drad44.gml.ang.jpg

[twomahs]

not sure of any half sizes. i bet there's plenty of 15x9 with xxr's. the xxr 530's come in a 15x8.25... wierd. ? and uhm so do the 527's. most of these appear to come in a 0 offset. just look around. i'm sure you'll find something.

[Vetal]

not sure of any half sizes. i bet there's plenty of 15x9 with xxr's. the xxr 530's come in a 15x8.25... wierd. ? and uhm so do the 527's. most of these appear to come in a 0 offset. just look around. i'm sure you'll find something.That is the problem, most of their wide 15" rims come in 0 offset that would stick out a lot on S-chassis

What about Weld Draglites, as I understand you need special lug nuts for them?

[Vetal]

Found out that wheel is 16-17lbs. Not much heavier than Weld Draglite, I guess, but a bit wider and doesn't require special lug nuts...

[axiomatik]

Work Meister CR01
http://www.workwheelsusa.com/media/wheels/29/143/wheelImage.png

Work Wheels :: Products :: CR 01 (http://www.workwheelsusa.com/product.php?category=29&wheel=143)

[Vetal]

Work Meister CR01
Work Wheels :: Products :: CR 01 (http://www.workwheelsusa.com/product.php?category=29&wheel=143)
Thanx, too pricey though :)