s13 auto to 5 speed help

[jinesz32]

I haven't worked on a 240 in awhile so I'm a bit confused,

the last owner messed up the harness big time so I just went ahead and replaced all of it with a 5 SPEED harness, not an automatic harness, the only thing I did not replace was the tranny harness.

Uncut chassis harness and uncut engine harness.

I plugged everything in and the car does not start, the tranny harness seems a bit hacked up too.

I don't know if it's the same for a 5 speed harness and an automatic harness but I jumped the wires together for the nuetral safety switch and still nothing,

the starter doesn't click just the relays in the 2 fuse boxes click,

any help appreciated thanks.

[Houseof1817]

does the motor hand crank? have you checked continuity to the fuel pump?

[jinesz32]

Found out the problem,
Clutch interlock was unplugged.

Trololol. Car runs fine now. hah.

[Darren]

so that would mean there's NO difference in the auto & 5 speed engine harnesses?

[jinesz32]

I wouldn't say there were no differences, I think it was a lot easier, I didn't have to hack my ecu wires, or jump the neutral position switch. also the wires for the auto control box isn't on there, I practically plugged it in, and started it up, the tranny harness was already hacked. But all you really need is the reverse light and speedo wires.