S13 SR20DET Partout! Reached Picture Limit! Look!

[s13 drifta]

I am parting out a great condition s13 blacktop sr20det. The motor was running well before being dismantled. The reason it was taken apart were intensions of building it to hold more power. I don't have time to build a motor right now, so all parts are up for sale. This entire motor is very clean and no parts are damaged. I have all bolts and small parts bagged and labeled. A lot of parts have been sold, what you see is what I have left for sale.

If you see anything you are interested in purchasing post reply or PM me.
All prices do not include shipping, please leave zip code for quotes.


Valve cover (one broken tab in rear, good for s13.4 cover)-$50
Blacktop head w/ cam caps, valves, springs, retainers, and seals-$280
OEM cams-$70 for pair
Cam gears-$30 for pair
Rocker arms-$80 for all 8
Lifters-$80 for all 8
Shims-$20 for all 16
Oil feed tubes-$30 for pair
Head bolts w/ washers-$20 for all

Timing chain tensioner-$30
Timing chain-$20
Lower timing gear-$10

Rods w/ ends & bolts-$80 all 4
Crank girdle -$30
Windage tray-$25
Upper oil pan-$60
Oil strainer-$20
Rear main seal w/ housing-$15
Oil pump spacer/collar-$10
Crank bolt-$8

Blacktop head (comes with cam caps, bolts, valves, springs, retainers, seals, and valve cover studs)-$280

http://img10.imageshack.us/img10/227/sr20parts058.jpg (http://img10.imageshack.us/img10/227/sr20parts058.jpg)

Crank girdle-$30
Main bolts-$20
http://img560.imageshack.us/img560/7751/sr20parts052.jpg (http://img560.imageshack.us/img560/7751/sr20parts052.jpg)

Windage tray w/ bolts- $25
http://img718.imageshack.us/img718/3482/sr20parts054.jpg (http://img718.imageshack.us/img718/3482/sr20parts054.jpg)

Inner baffle w/ bolts-$15
http://img194.imageshack.us/img194/4522/sr20parts055.jpg (http://img194.imageshack.us/img194/4522/sr20parts055.jpg)

Rear main housing w/ seal-$15
http://img710.imageshack.us/img710/5623/sr20parts059.jpg (http://img710.imageshack.us/img710/5623/sr20parts059.jpg)

Upper oil pan-$60
http://img685.imageshack.us/img685/9951/sr20parts053.jpg (http://img685.imageshack.us/img685/9951/sr20parts053.jpg)

OEM cams-$70
http://img714.imageshack.us/img714/7574/020uqk.jpg (http://img714.imageshack.us/img714/7574/020uqk.jpg)

Oil feed tubes-$30 for pair
http://img528.imageshack.us/img528/2527/022mz.jpg (http://img528.imageshack.us/img528/2527/022mz.jpg)

All bolts bagged and labeled
http://img638.imageshack.us/img638/7615/026ou.jpg (http://img638.imageshack.us/img638/7615/026ou.jpg)

Timing chain tensioner-$30
http://img594.imageshack.us/img594/6937/sr20parts034.jpg (http://img594.imageshack.us/img594/6937/sr20parts034.jpg)

Oil sandwich plate-$30
http://img444.imageshack.us/img444/2627/018ag.jpg (http://img444.imageshack.us/img444/2627/018ag.jpg)

Flex plate-$40
http://img839.imageshack.us/img839/3964/023lxo.jpg (http://img839.imageshack.us/img839/3964/023lxo.jpg)

OEM flywheel-$50
Flywheel bolts-$30 for all 8
http://img39.imageshack.us/img39/4213/022cy.jpg (http://img39.imageshack.us/img39/4213/022cy.jpg)

Sr20 Exedy stage 1 clutch (lightly used)-SOLD
http://img809.imageshack.us/img809/4919/021wra.jpg (http://img809.imageshack.us/img809/4919/021wra.jpg)

Sr20det transmission w/ all sensors-$290
http://img193.imageshack.us/img193/3918/020ij.jpg

Sr20det starter-$80
http://img84.imageshack.us/img84/160/009cfv.jpg (http://img84.imageshack.us/img84/160/009cfv.jpg)

Coil pack cover (small crack next to O)-$20
http://img542.imageshack.us/img542/9440/sr20parts030.jpg (http://img542.imageshack.us/img542/9440/sr20parts030.jpg)

Coil packs-$70 for all 4
http://img851.imageshack.us/img851/3044/011cu.jpg (http://img851.imageshack.us/img851/3044/011cu.jpg)

Coil pack harness-$30
http://img837.imageshack.us/img837/2646/sr20parts028.jpg (http://img837.imageshack.us/img837/2646/sr20parts028.jpg)

Crank angle sensor-$100
http://img16.imageshack.us/img16/4681/019ydq.jpg (http://img16.imageshack.us/img16/4681/019ydq.jpg)

Knock sensor w/ harness-$30
http://img151.imageshack.us/img151/1745/016xkn.jpg (http://img151.imageshack.us/img151/1745/016xkn.jpg)

S13 manual TPS-$40
http://img406.imageshack.us/img406/2750/sr20parts047.jpg (http://img406.imageshack.us/img406/2750/sr20parts047.jpg)

Oil strainer-$20
http://img191.imageshack.us/img191/417/002fye.jpg (http://img191.imageshack.us/img191/417/002fye.jpg)

Water outlet w/ bolts-$30
http://img39.imageshack.us/img39/6253/016jb.jpg (http://img39.imageshack.us/img39/6253/016jb.jpg)

Water inlet w/ bolts-$20
http://img707.imageshack.us/img707/636/003gdh.jpg (http://img707.imageshack.us/img707/636/003gdh.jpg)

Thermostat housing w/ bolts-$20
http://img825.imageshack.us/img825/2519/004ju.jpg (http://img825.imageshack.us/img825/2519/004ju.jpg)

Temp sensor housing-$20
http://img689.imageshack.us/img689/7564/002qlun.jpg (http://img689.imageshack.us/img689/7564/002qlun.jpg)

Temp sensor for gauge-$10
Temp sensor for ECU-$10
Temp sensor harness-$15
http://img803.imageshack.us/img803/2780/024dx.jpg (http://img803.imageshack.us/img803/2780/024dx.jpg)

S13 water lines-$30
http://img17.imageshack.us/img17/7504/sr20parts049.jpg

S13 intake manifold-$50
http://img832.imageshack.us/img832/8123/004nsh.jpg (http://img832.imageshack.us/img832/8123/004nsh.jpg)

Intake manifold brackets-$20 for all
http://img585.imageshack.us/img585/4889/017ur.jpg (http://img585.imageshack.us/img585/4889/017ur.jpg)

S13 throttle body w/ auto TPS-$50
http://img802.imageshack.us/img802/2788/005te.jpg (http://img802.imageshack.us/img802/2788/005te.jpg)

S13 IACV-$80
http://img833.imageshack.us/img833/6719/sr20parts019.jpg (http://img833.imageshack.us/img833/6719/sr20parts019.jpg)

370cc Injectors-SOLD
injectors caps w/ screws and washers-$5 each
S13 fuel rail-$25
SR20 fuel pressure regulator-$25
http://img717.imageshack.us/img717/2065/007ufo.jpg (http://img717.imageshack.us/img717/2065/007ufo.jpg)

Sr20 alternator bracket-$30

Sr20 alternator-$80


Sr20 A/C compressor $70
Sr20 A/C bracket w/ bolts-$30
http://img839.imageshack.us/img839/3381/sr20parts043.jpg (http://img839.imageshack.us/img839/3381/sr20parts043.jpg)

Water pump pulley-$15
Idler pulley-$15
http://img651.imageshack.us/img651/6596/sr20parts045.jpg (http://img651.imageshack.us/img651/6596/sr20parts045.jpg)

Dip stick housing-$10

Oil separator-SOLD
http://img85.imageshack.us/img85/2720/sr20parts031.jpg (http://img85.imageshack.us/img85/2720/sr20parts031.jpg)

S13 sr20 boost solenoid and egr sensor w/ bracket-$25
http://img809.imageshack.us/img809/9974/sr20parts048.jpg (http://img809.imageshack.us/img809/9974/sr20parts048.jpg)

Sr20 AIV-$20
http://img256.imageshack.us/img256/104/sr20parts025.jpg (http://img256.imageshack.us/img256/104/sr20parts025.jpg)

Engine mount brackets-$40
http://img713.imageshack.us/img713/6458/014iqs.jpg (http://img713.imageshack.us/img713/6458/014iqs.jpg)

OEM exhaust manifold-$50
http://img52.imageshack.us/img52/6783/sr20parts020.jpg (http://img52.imageshack.us/img52/6783/sr20parts020.jpg)

OEM turbo elbow-$20
http://img803.imageshack.us/img803/8038/012gb.jpg (http://img803.imageshack.us/img803/8038/012gb.jpg)

Goodridge s13 sr20det water return line-$40
http://img204.imageshack.us/img204/8887/240parts218.jpg

S14 sr20det water neck-$50
http://img853.imageshack.us/img853/4592/sr20parts014.jpg (http://img853.imageshack.us/img853/4592/sr20parts014.jpg)

T28 actuator-$25
http://img600.imageshack.us/img600/5975/sr20parts010.jpg (http://img600.imageshack.us/img600/5975/sr20parts010.jpg)

T25 turbo water and oil lines w/ banjo bolts-$30
http://img859.imageshack.us/img859/7568/sr20parts036.jpg (http://img859.imageshack.us/img859/7568/sr20parts036.jpg)

HKS bov flange w/ 2" pipe-$25
http://img821.imageshack.us/img821/3781/sr20parts013.jpg

3" down pipe ( used few hrs.)-SOLD
http://img850.imageshack.us/img850/9387/008vkf.jpg (http://img850.imageshack.us/img850/9387/008vkf.jpg)

Oil feed banjo bolt-$10
T25 oil restrictor-$10

CXracing 2 piece cold pipe (brand new)-$50
http://img854.imageshack.us/img854/1649/014wv.jpg (http://img854.imageshack.us/img854/1649/014wv.jpg)

Steel cold pipe painted aluminum-$50
http://img46.imageshack.us/img46/5605/001urr.jpg (http://img46.imageshack.us/img46/5605/001urr.jpg)


Thanks for looking, let me know if you need anything.

[s13z28]

do you still have the block and willing to sell?

[blank240]

would you do $40 shipped for the flex plate to 54401?

[Pappasmurf814]

Is the oil seperator sill available, if so whats your paypal info?

[s13 drifta]

do you still have the block and willing to sell?

I have a s13 sr20det block I can sell you.

would you do $40 shipped for the flex plate to 54401?

$40 plus shipping.

Is the oil seperator sill available, if so whats your paypal info?

Yes it is, PM me for my address.

[1slicktwo4oh]

interested in the rocker shims and oil strainer shipped priced to 90602

[s13 drifta]

interested in the rocker shims and oil strainer shipped priced to 90602

I would like to sell the shims with the head, or head first. $30 shipped for strainer.

[junkie40]

still have clutch?

[tx240ss]

need the thermostat housing.. shipped to 77345.. need it like yesterday!!

[s13 drifta]

still have clutch?
Yes, I still have it for sale.

need the thermostat housing.. shipped to 77345.. need it like yesterday!!

$30 shipped.

[s13 drifta]

1st bump. Let me know what you need.

[s13 drifta]

Last bump, get your sr20 parts.

[Raiders2g3]

hey whats dude.. how much shipped to SoCal?

[Erection_Connection]

would you sell me one coil pack?

[Highlo630]

quote for the coils shipped to florida 33713?

[s13 drifta]

hey whats dude.. how much shipped to SoCal?
How much for what? Everything?

would you sell me one coil pack?
Yeah, I can sell one coil pack for $20.

quote for the coils shipped to florida 33713?
Shipping will be $15 to Florida. Total of $85 shipped.

[Raiders2g3]

thermostat housing

[s13 drifta]

$28 shipped.

[otto_3478s]

I need the turbo lines oil feed and return, price shipped to 77066?

[s13 drifta]

I need the turbo lines oil feed and return, price shipped to 77066?

$45 shipped.

[Charles33579]

PM me the best price you can do on the bare head shipped to 33579. Something tells me shipping might not make it worth it.

[S-Nation S13]

Free bump..thread is organized ..

[s13 drifta]

PM me the best price you can do on the bare head shipped to 33579. Something tells me shipping might not make it worth it.

Shipping will be $90 for the head to 33579.

Free bump..thread is organized ..

Thanks, takes time to do it right.

[BSPerformance]

what condition is the bottom end in? good compression any scaring on the walls etc?

[s13z28]

bump for legit seller.
thanks again for block

[s13 drifta]

what condition is the bottom end in? good compression any scaring on the walls etc?

The block and crank are sold. I have the rods, girdle, oil pans, windage tray, and other parts listed.

bump for legit seller.
thanks again for block

You're welcome, let me know if you need anything else.

[dlciii]

Do you still have the goodridge water return line? I assume that is a water return line for a T25/T28 SR20DET turbo? I would like this line and am ready to paypal. Need it shipped to 22015.

[VYKTR]

PM Sent on Valve Cover...

[4bangers]

pm'ed about rocker arms

[Megaman V2]

Do you have the plastic timming chain guide? from the lower timming chain and the 2 allen bolts that go with it? if so price shipped to 32618

[s13 drifta]

Do you have the plastic timming chain guide? from the lower timming chain and the 2 allen bolts that go with it? if so price shipped to 32618

Yes, I have both plastic timing guides with bolts for $50 shipped.