TurboAWD
02-19-2012, 12:14 PM
Hey everyone, this is just a feeler, not really sure about the future of my car, so I'm putting this out here as gauge of interest. If I dont really get any response, Im going to part it out.
Specs:
1988 Celica All Trac
Supra CT26
Aussie Downpipe
SuperPro poly bushings front control arms and sway bars
Poly filled rear diff mount
front mount intercooler
straight intake
solid shifter bushings
Not installed:
SS clutch line
TRD solid rear sway bar bushings
Currently the car is having some issues with running. It has a low idle(~500rpm), and its running really rich, to the point if you stab the gas itll die. I know it has a vacuum leak near where i spliced in for the boost gauge and controller, and im pretty sure that the MAF is the reason for the low idle and rich condition. The climate control unit took a shit, so i got a new one, but for some reason it doesnt seem to fit like my old. The heat does work, though, just needs to have the unit installed. other than that the car is fine, and never gave me a problem while i driving it everyday.
outside of the above issues, the car is solid. no rust, fresh paint and the whole underside has been undercoated. the suspension was refreshed with new shocks all around with poly bushings in the front control arms and sway bar. the car is in really good condition, and ive put a lot of time and effort into making it look good. the car has never seen more than 10psi, and the turbo has just over 2k miles on a rebuild. the valve cover gasket was just and as well as the straight intake.
Taking into account that it is a little rough, with some stuff that needs to be taken care of, the price is going to be adjusted as needed. i'm looking for 4000 in total, and thats for the car and all the extra parts i have with it. i've put a lot of time into the car, im flexible on the price but only to an extent.
here are the pics:
Pictures by SleepingTurbo - Photobucket (http://s287.photobucket.com/albums/ll141/SleepingTurbo/)
i can be reached here or at [email protected]
pm for details and questions.
Specs:
1988 Celica All Trac
Supra CT26
Aussie Downpipe
SuperPro poly bushings front control arms and sway bars
Poly filled rear diff mount
front mount intercooler
straight intake
solid shifter bushings
Not installed:
SS clutch line
TRD solid rear sway bar bushings
Currently the car is having some issues with running. It has a low idle(~500rpm), and its running really rich, to the point if you stab the gas itll die. I know it has a vacuum leak near where i spliced in for the boost gauge and controller, and im pretty sure that the MAF is the reason for the low idle and rich condition. The climate control unit took a shit, so i got a new one, but for some reason it doesnt seem to fit like my old. The heat does work, though, just needs to have the unit installed. other than that the car is fine, and never gave me a problem while i driving it everyday.
outside of the above issues, the car is solid. no rust, fresh paint and the whole underside has been undercoated. the suspension was refreshed with new shocks all around with poly bushings in the front control arms and sway bar. the car is in really good condition, and ive put a lot of time and effort into making it look good. the car has never seen more than 10psi, and the turbo has just over 2k miles on a rebuild. the valve cover gasket was just and as well as the straight intake.
Taking into account that it is a little rough, with some stuff that needs to be taken care of, the price is going to be adjusted as needed. i'm looking for 4000 in total, and thats for the car and all the extra parts i have with it. i've put a lot of time into the car, im flexible on the price but only to an extent.
here are the pics:
Pictures by SleepingTurbo - Photobucket (http://s287.photobucket.com/albums/ll141/SleepingTurbo/)
i can be reached here or at [email protected]
pm for details and questions.