driveshaft problems

[Po_31]

long story short
im installing
a one piece aluminun driveshaft
to my sr20det
and its short

i measure the driveshaft and it 49.25 in


does anyone knows the right measurement for the s14 driveshaft
thanks

[chiboy002]

you probably have an ABS shaft

[Po_31]

my 240sx does not have abs

[SR Skid_Kid]

obviously...:rofl:

[abunai the drifter]

the abs drive shaft is shorter than no abs compare it to a sock one

[jacobzking]

my s14 shaft is 49.25" from tip to tip and it is the right length. when you say its short... what is it too short for? the shaft should have a little play in it. 49.25 from front to back is perfect length for non-abs s14.

[abunai the drifter]

abs cars have hall effect ring on the pinion shaft of the diff thus making the pinion shaft longer so to compensate for this abs drive shafts are shorter than non abs ones so you need to find a stock non abs drive shaft and compare them