PDA

View Full Version : CA *Testing Waters* Fully Built blacktop SR20 part out - AEM, HKS, TIAL, GARRETT, ACT :[


jarend
02-15-2012, 04:33 PM
MORE PARTS COMING, STAY TUNED..


NOT DESPERATE TO SELL, BUT EVERYTHING MUST GO! MAKE OFFERS!!



Long story short. Had a friend of a friend do the machine shop work on my sr20det, sleeved it for me and it was done wrong. So I'm deciding whether or not to rebuild another sr with all my parts or just scrap the entire project.

Here is a rough list of what was installed and never ran, some parts are used but all are in perfect working condition. All prices are picked up in San Diego. --

These Cams and Cam gears were purchased brand new then installed into a motor but never ran. Two bolts are missing from one of the cam gears but they can be ordered easily by contacting HKS for cheap no more then $20. Costed close to a grand for these parts brand new so take advantage and get yourself a steal.


HKS Step 2 Intake and Exhaust Camshafts - $400

HKS Adjustable Cam Gear - $200

OEM S14 Water Pump Unused - $50

OEM S13 sr20det Water Pump *Came off a running car, worked perfect* - $20

S13 sr20det Unused Timing Chain Kit - $150

S13 sr20det 3 Piece RZ Ralco Blue Anodized Pulley Kit - SOLD

S13 sr20det Unused Nismo Low Temp Thermostat - $50

AEM Engine Management System Version 1 - SOLD to meano_lover

DiF Fan Controller - SOLD to Karlitos

Altima Electric Fans - $40 *Pick Up Only*

S13 sr20det Unused Koyo Aluminum Radiator - $200 *Pick Up Only*

S13 sr20det Unused Koyo Radiator Cap - SOLD to Karlitos

S13 sr20det Adjustable Fuel Pressure Regulator - SOLD

No Name Oil Catch Can Polished Silver - $20

Sentra SER SPEC V GOLD Brembo's (http://zilvia.net/f/#) that are fully loaded with brand new rotors, nearly new pads and lines. This is a bolt on upgrade for S13 and S14. They are over 13 inches in size. In fact the piston size is the same as the 350Z Brembo. 3They use a 296mm diameter rotor (12.1 inch) same diameter as the R32 GTR. The rotors for them stock are 4 lug but you can drill them for 5 lug just like people do when running Z Calipers on a 4 lug car (http://zilvia.net/f/#). FULL FRONT BBK - $400

Nissan Sentra Spec V Rear Rotors Brand New in the box - $40 *Pick Up Only*

S13 sr20det Blue "Power"? Silicon Radiator Hoses - SOLD to riptor (http://zilvia.net/f/members/riptor.html)

S13 sr20det HKS Twin Power Ignition System - SOLD to speedgod^s13

S13 sr20det Transmission NO GRINDS SHIFTS PERFECTLY - $250 *Pick Up Only*

S14 Grey Cloth Front Seats 9/10 Near Perfect Condition with sliders and mounting brackets - SOLD locally

Blitz SBC ID Boost Controller - SOLD to CHEN FUK YU (http://zilvia.net/f/members/chen-fuk-yu.html)

Blitz Turbo Timer - SOLD to xSoCalxRiderx125 (http://zilvia.net/f/members/xsocalxriderx125.html)

S13 sr20det Mishimoto Starter ~2k miles - $140

S13 sr20det Stock Alternator *Unknown Mileage* - $50

S13 sr20det Stock Fan Shroud *Crack on one of the fins* - $5

Mishimoto Black Front Mount Intercooler and piping complete with couplers, hardware, hotpipe and Greddy Knockoff BOV - $250 *Pick Up Only*

Garrett t3/t4 57 Trim Turbo - SOLD Locally.

Tial 38mm Wastegate (F38) with Small Blue Spring & Dump Tube - SOLD

S13 240sx Apexi N1 32 Way Adjustable Coilovers ran for ~3k miles - $850 *Pick Up Only*

Set of four (4) Sportmax 006 wheels and tires (http://zilvia.net/f/#) for sale. The two rear wheels are 18" x 9.5" and the fronts are 18" x 8.5". The lug pattern is 4 x 100 AND 4 x 114.3. The rear wheels are wrapped in 275/35/18 Nankang Ultra Sport NS-II tires while the fronts are 245/40/18 with the same tires. Tires have ~3k miles. - $750 *Pick Up Only*

Unused Act 6-Puck Heavy Duty Unsprung Clutch Holds 463 ft/lbs of torque - $325

S13 Harness Bar, Easy Install and Mounts very well! - $160

S13 Strut Bars Front and Rear - $60

2x Unused S13 sr20det ISIS downpipe - $80 each

S13 sr20det Unused ISIS Cast Top Mount Turbo Manifold - $140

S13 sr20det Freddy Intake Manifold with Stock Throttle Body - $160

S13 sr20det Stock Fuel Rail - $50

S13 sr20det Stock 370cc Injectors - $100

S13 sr20det Oil Dip Stick and Dip Stick Tube Brand New from FRSport - $40

Pics of everything I was able to get to.


http://s651.photobucket.com/albums/uu238/ohhfasho/


LET ME KNOW IF YOU NEED ANY STOCK PARTS, HAVE A TON OF STUFF.








Can get pictures of whatever you are interested in.

-Thanks
Jaren D.

va240dude
02-15-2012, 04:55 PM
Interested in the Nismo thermostat if you come down on pricing. They're like $60 new in box.

jarend
02-15-2012, 05:04 PM
Nismo 21200-RS520 Colder Thermostat for SR20DET KA24DE (http://www.frsport.com/Nismo-21200-RS520-Colder-Thermostat-for-SR20DET-KA24DE_p_1088.html)

420240
02-15-2012, 07:22 PM
are you willing to let the injectors go for two bills even??

jarend
02-15-2012, 09:35 PM
225 if you come pick them up.

CHEN FUK YU
02-15-2012, 09:38 PM
I got first dibs on boost controller pmed u .

420240
02-15-2012, 09:43 PM
sounds good to me, ill be down that way saturday with the bread if you have not sold em by then :]

jarend
02-15-2012, 09:46 PM
word, i'll pm you my number. first come first serve so let me know!

meano_lover
02-15-2012, 11:03 PM
Interested in the aem ems. What's the part #, and will it cross to a s13 redtop? If so, i'll take it.

97nismo
02-16-2012, 07:39 AM
fyi...
12.1 inches does not equal 296mm

the brembo calipers use a
305mm x 22mm rotor

199240sxcoupe
02-16-2012, 09:12 AM
Pmmed
Interested in fans and controller

jarend
02-16-2012, 01:05 PM
fyi...
12.1 inches does not equal 296mm

the brembo calipers use a
305mm x 22mm rotor

Good to know. He may be right. Copied that all from the Zilvia member that sold me the BBK. I'm lazy, I know. Thanks!

jarend
02-16-2012, 08:42 PM
PMed.

Pmmed
Interested in fans and controller


Got pics posted of everything I could. Will get more in the next few days.

speedgod^s13
02-17-2012, 02:41 AM
Dibs on HKS ignition system. Can I please see pictures, to show condition? I'm assuming it comes with the s13/s14 harness?

simplistek
02-17-2012, 03:11 AM
also interested in the ignition system. and i'm local too. ;]

meano_lover
02-17-2012, 07:54 AM
any idea on part # for ems?

jarend
02-17-2012, 06:08 PM
Got the pictures of the AEM EMS in the photo album as well now. Let me know if you guys need any other pictures. Trying to get the cams and cam gears by the end of the weekend. Sorry for the lag guys.

Pictures by ohhfasho - Photobucket (http://s651.photobucket.com/albums/uu238/ohhfasho/)

Pictures by ohhfasho - Photobucket (http://s651.photobucket.com/albums/uu238/ohhfasho/)

Pictures by ohhfasho - Photobucket (http://s651.photobucket.com/albums/uu238/ohhfasho/)

speedgod^s13
02-17-2012, 07:24 PM
also interested in the ignition system. and i'm local too. ;]

I'm already going to buy it, sorry bud.

riptor
02-17-2012, 07:45 PM
radiator hoses shipped to 93555

jarend
02-18-2012, 12:17 PM
PMed you, 60 shipped.

radiator hoses shipped to 93555



THIS IS NO LONGER TESTING WATERS. EVERYTHING MUST GOOOOOOOOOOO

meano_lover
02-18-2012, 05:22 PM
Ems payment sent and sold to me. Thanks, free bump!

jeff kelly
02-18-2012, 08:08 PM
how much for the starter shipped to 19111

speedgod^s13
02-18-2012, 08:59 PM
Payment sent, for HKS ignition system. Here's a bump.

jarend
02-18-2012, 11:28 PM
PMed.

$150 Shipped anywhere in the U.S.


how much for the starter shipped to 19111

jarend
02-18-2012, 11:34 PM
Payment received. Will give you a tracking number as soon as I get it shipped out.

-Jaren

Payment sent, for HKS ignition system. Here's a bump.

lilrusty
02-19-2012, 01:47 AM
Don't mean to be an ahole bro, but you should really come down on price for nismo thermostat. I know frsport sells them for that much but you gotta check this out.... NISMO JDM LOW TEMPERATURE THERMOSTAT (http://www.thenismoshop.com/NISMO-JDM-LOW-TEMPERATURE-THERMOSTAT_p_22.html) and that's the regular price....

Nismo240driftSX
02-19-2012, 04:34 AM
Potentially interested in harness bar. More pics of mounting points? Willing to ship? Also, you think that BBK will clear a 16x7 rim?

jarend
02-19-2012, 10:21 AM
Haha, bummer. Lowered to $50!

Don't mean to be an ahole bro, but you should really come down on price for nismo thermostat. I know frsport sells them for that much but you gotta check this out.... NISMO JDM LOW TEMPERATURE THERMOSTAT (http://www.thenismoshop.com/NISMO-JDM-LOW-TEMPERATURE-THERMOSTAT_p_22.html) and that's the regular price....

jarend
02-19-2012, 11:09 PM
Will get more pics by Tuesday and I don't think they would clear. Definitely will clear these 006's if you want a package deal :naughtyd:

Potentially interested in harness bar. More pics of mounting points? Willing to ship? Also, you think that BBK will clear a 16x7 rim?

Slidin' Sam
02-20-2012, 08:20 AM
Can you post up some more pics of the tial wg? What springs/flanges/fittings do you have for it?

jarend
02-20-2012, 10:42 AM
Didn't even think about that. Bought it so long ago I can't even remember. Will have to check for you. Will get that done by tomorrow with some pics of the spring that it comes with. Thanks.

-Jaren


Can you post up some more pics of the tial wg? What springs/flanges/fittings do you have for it?

jarend
02-21-2012, 12:39 PM
Bump to the topppp. Make offers people, all of its got to go! :ughd:

Karlitos
02-21-2012, 12:50 PM
Bump, thanks for the DIF controller and Radiator Cap. Good seller here, people.

xSoCalxRiderx125
02-21-2012, 08:30 PM
Bump for a legit seller.

Slidin' Sam
02-22-2012, 10:12 AM
Didn't even think about that. Bought it so long ago I can't even remember. Will have to check for you. Will get that done by tomorrow with some pics of the spring that it comes with. Thanks.

-Jaren

Any news on the wastegate?

jarend
02-22-2012, 03:55 PM
Ahhh, I'm sorry man! I'll do that tonight for you for sure.



Any news on the wastegate?

jarend
02-23-2012, 06:15 PM
Sorry it didn't end up being what you needed!

Any news on the wastegate?


Make offers people!

meano_lover
02-24-2012, 01:58 PM
Got the ems today. Thanks!

jarend
02-24-2012, 11:57 PM
No problem bud. Leave feedback when you get a chance.


Got the ems today. Thanks!

jarend
02-25-2012, 12:59 PM
Buy my stuff!

desertKAdrifter
02-25-2012, 02:48 PM
ill take the fuel pressure regulator if u still have it. Ill be in the SD area monday.

jarend
02-26-2012, 01:06 PM
PMed you my phone number, give me a call when you're in SD. I work 9-4 tomorrow.


ill take the fuel pressure regulator if u still have it. Ill be in the SD area monday.

jarend
02-27-2012, 03:59 PM
Make offers. If you need any OEM parts just ask. Have a lot of stuff that you need people.

jarend
02-29-2012, 08:57 AM
Bump for a legit seller.


Thanks man.

jarend
03-03-2012, 10:50 AM
To the top. Let me know if anyone needs pics.

riptor
03-03-2012, 09:06 PM
/bump for a good seller!

angelz365
03-06-2012, 09:23 AM
hey can you pm about those 550 injectors? ur inbox is full

dato
03-06-2012, 02:13 PM
interested in turbo. I can pick up. PM me
thanks

OutlawLui
03-06-2012, 03:07 PM
Do u have p/s pump and bracket?

jarend
03-08-2012, 10:25 AM
interested in turbo. I can pick up. PM me
thanks


Garrett turbo and tial wastegate are sold.

jarend
03-10-2012, 09:35 AM
Do u have p/s pump and bracket?




PMed. To the top.

boltspeedman89
03-12-2012, 12:30 AM
bump for a good seller.. thanks for the seats!!

jarend
03-17-2012, 10:25 AM
bump for a good seller.. thanks for the seats!!



Yea buddy. No problem. Let's get the rest of this stuff sold! Make offers!!

94vert
03-17-2012, 04:19 PM
bump for great seller

LuckyRPS13
03-18-2012, 03:06 AM
Can you send me a picture of the Oil catch can. Also looking for a S13 SR20DET oil filter block. If you have one let me know a price.

Edit: found the album but I can not tell if there is 2 ports on the can.

1gr8bar10der
03-18-2012, 08:57 AM
Clear pics of the brembo? Your album doesn't have ones

harry
03-18-2012, 08:48 PM
Interested in strut bars.what brand?

jarend
04-10-2012, 02:17 PM
Sorry to everyone I haven't responded to. Moved into a new place and have been really busy. Getting internet on Wednesday so I will be able to get any pics or info anyone wants. For a quicker response feel free to call/text 858 822 9613.

Thanks!
Jaren D.

billiam
04-10-2012, 11:12 PM
very interested in Hotpipe with Synapse Syncronic BOV send me a pm if willing to ship to toronto