PDA

View Full Version : Stand Alone PLUS Install for $1499.00


02-15-2012, 09:42 AM
Get you car up and running for the season.

Get a FuelTech EFI system installed and DYNO tuned on any car, with a distributor ignition, for only $1499.00. NA, Turbo, Supercharged, NOS, Upgraded Injectors, Motor Swap, Does Not Matter!

http://www.speedmaxperformance.com/Store/images/detailed/0/FT200.png
The picture is entire unit... The hand held controller is the complete ECU

The FT200 comes with a built in MAP sensor so you can ditch the stock MAF

Click here to reserve your spot: FuelTech :: FuelTech Manufacturer Install and Dyno Session March 13th - Speed Max Performance - Store (http://www.speedmaxperformance.com/Store/index.php?dispatch=products.view&product_id=30088)

Click here for more info or to buy: FuelTech | FT200 EFI (http://www.speedmaxperformance.com/Store/index.php?dispatch=products.view&product_id=30001)

For distributor less cars the FT300 will fulfill you needs.

burns_rubber
02-15-2012, 10:07 AM
great product . saw it on fueled mag

whitefedorafilms
02-15-2012, 12:57 PM
Used to tune a 280 hp All motor K20. good stuff.

ma.jomaa
02-15-2012, 01:32 PM
so $600 for installation and Dyno Tune, pretty good deal too bad ur not in the west coast

Flaco S14
02-16-2012, 12:45 AM
how is this the entire unit? does it come with its own ECU? how will this be for an RB26?

02-16-2012, 07:11 AM
how is this the entire unit? does it come with its own ECU? how will this be for an RB26?


This is the ECU NOTHING else. The wire harness and vacuum line connects to the controller. The RB26 will need a ft300 or ft400 EFI system since it has coil on plug design.

Link to the FT300
FT300 - Eletronic Fuel Injection - Electronic Fuel Injection - Produtos - FuelTech (http://www.fueltechusa.com/br/product/detail/214/ft300)
$1199.00 for the unit

$600.00 for the install and Tune w/ dyno.

02-16-2012, 10:52 AM
so $600 for installation and Dyno Tune, pretty good deal too bad ur not in the west coast

What kinda of car and engine do you have. We have a few cars locally that we can set up video and dyno tune and and send you a unit with a tuned map all ready installed.

SPATURBODAVE
03-10-2012, 08:43 PM
:ssex:FuelTech Dyno Day

March 17th @ ProFab Chassis (Question & Answer Seminar)

All are welcome, complementary food and drinks
Learn about a new cutting edge standalone EMS from the manufacture
We’ll even do the install for you!!! Drop off your car BEFORE MARCH 14th and pick it up with your FuelTech EFI unit installed and dyno tuned on the 17th for only $600.00
You will need to purchase a FuelTech unit (FT200, FT300, FT400) on or before the install date of March 14th.
Link for purchase of Install and tune: (FuelTech :: FuelTech Manufacturer Install and Dyno Session March 13th - Speed Max Performance - Store (http://www.speedmaxperformance.com/Store/index.php?dispatch=products.view&product_id=30088))
Dyno and instructional secession will be held at ProFab Chassis on the 17th of March 10, 2012 @ 27 Ridge Road Whitehouse Station, NJ 08889 www.profabchassis.com (http://www.profabchassis.com/)
Contact us with any questions. 973-891-1755
Vehicle must be dyno ready.