PDA

View Full Version : MI S13 SR20DET Part Out!


240 GTR
02-12-2012, 06:31 PM
Parting out my SR that I used in Formula D last season. I was preparing to upgrade/rebuild everything over the winter, but decided to go in a different direction. The block, head, and crank have been checked by a machine shop and are in good shape.

I may be able to work out package deals if multiple items are purchased.

Block: $800 shipped
-87mm Bore (Has been honed a few times at this size, so it is probably on the upper end of 87mm.)
-ARP Main Studs
-Align Honed main journals for ARP Main Studs
-Main Girdle
-Oil Squirters
-Upper oil pan: modified to clear main studs
-Stock Lower Oil Pan
-Oil Pickup Tube and Baffles
-Rear Main Plate
-Front cover/Oil Pump

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc7/422431_10150662374175972_772275971_10968126_208774 4907_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/404552_10150662374265972_772275971_10968127_140794 2182_n.jpg

Crank: $200 Shipped
-Checked out at machine shop
-Could probably use a micropolish

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/428342_10150662374325972_772275971_10968128_131653 7316_n.jpg

Head: $450 Shipped
-3 Angle Valve Job last winter
-BC Springs
-BC Retainers
-OEM 10mm Bolts
-Cam Caps and bolts
-Cam Oilers
-Cam Gears
-Water Neck
-No Lifters, Rocker Arms, or Cams

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/425421_10150662374005972_772275971_10968124_138210 2941_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/401186_10150662374115972_772275971_10968125_633637 939_n.jpg

Intake Manifold: $150 Shipped
-Fuel Rail and Injectors NOT included
-Throttle body
-Working TPS
-Working IACV
-One bolt hole "ear" had cracked, but has been welded. Seals fine.

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/419010_10150662374735972_772275971_10968135_307145 737_n.jpg

OEM Motor Mounts and Brackets: $60 Shipped

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc7/402140_10150662374615972_772275971_10968132_929137 831_n.jpg

OEM Tstat Housing/Under Intake water lines: $60 shipped
-Heater lines and TB lines have been blocked off

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/424908_10150662374685972_772275971_10968134_189097 8630_n.jpg

Unorthodox Aluminum Crank Pulley: $120 Shipped
-A little beat up, but has been balanced and works perfect.

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc7/429361_10150662374455972_772275971_10968130_373653 274_n.jpg

HKS 272 IN/EX Cams: $380 Shipped
-Minor some minor scoring on lobes and journals.

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/429648_10150662374540972_772275971_10968131_124589 6627_n.jpg