Parting out 1989 S13 Coupe XE

[kazuo]

Everything is available more or less minus the dashboard and the gauge cluster. EVERYTHING. The windshield is still there but one of my friends cracked it while we were parting out the car. :P

Big heavy parts are LOCAL PICK UP ONLY DO NOT ASK ME TO SHIP THEM . Smaller, lighter parts can be shipped.

Below is a sampling of what is available. Basically everything on the car is up for grabs, even if it not listed below. Let me know what you're looking for and make an offer and I'll let you know if I have it. :)

PS - Will consider trades for 26mm Z32 Calipers for certain items

Thanks

----------

SOHC Digital Gauge Cluster (w/ HUD and subharness)
SOHC Digital Gauge Cluster (no HUD no subharness)
Driver & Passenger Power Doors (complete w/ panel, power mirrors, power windows & door locks; will only be sold in a pair unless you give me an obscene amount of money. )
Rear Trunk Lid (has 4 holes drilled for spoiler, no rust, the holes were primered and painted)
S13 Silvia Fenders (2; one is straight the other has light dents, $200 FIRM NO LOWBALLERS ; ask Jspec how much they want for one fender)
S13 Silvia Fender (severe denting, butcan be fixed with TLC, lowballers welcome)
KA24E (complete motor no transmission; alternator is bad, still has clutch attached; pick up only and lowball ok)
KA24E Fan Shroud
S13 Open Differential
S13 JDM Driveshaft
S13 Dashboard (came with Digital Cluster/HUD so has hole for HUD; light cracking but otherwise ok, lowballers welcome)
S13 Passenger Side Tail Light
S13 180SX "Pignose" front end (fenders, bumper, support, lights, hood - will seperate)
S13 OEM Radiator Support (4 months old and is in PERFECT condition)

[DRFT]

hey wassup,

you still got clutch pedal and manual tranny crossmember? if so ill take those 2 and the driveshaft. The driveshaft is the same as usdm driveshaft right?

email me info @ [email protected]

thanks

[zero.counter]

Originally posted by kazuo
1. SOHC Digital Gauge Cluster (w/ HUD and subharness)

2. S13 Silvia Fenders (2; one is straight the other has light dents, $200 FIRM NO LOWBALLERS ; ask Jspec how much they want for one fender)

How much for 1 and/or 2? I know that the fenders are big, but would you make an exception for shipping and do you have pictures by any chance?

[kidinthehall]

I see you have the complete doors listed for sale? I'm very interested just the door panels if they are clean, and you're willing to part with them.

Also interested in the rear deck panel (carpet piece and vents).

Thanks
[email protected]

[derux]

how much are you asking for the doors?

[mobilesuit818]

I will take the flywheel for 25.00

[kazuo]

DRFT: I have the crossmember & the driveshaft but no pedal. The driveshafts are the same (USDM and JDM)

zero.counter: I can possibly make an exception if you cover packing materials and me having to haul them to Greyhoud with no car :) (I will have to ship them via GPX, greyhound's shipping service). Yes I have pics, I will email you later tonight when I get home from work

kidinthehall: The panels are straight but I'm selling the door panels with the doors, sorry.

derux: PM me with an offer and we'll talk

mobilesuit818: PM me to work out the deal

[DRFT]

kazuo, pm sent but i fergot to ask if you had any pics of the items. if so can you please send them to me.

thanks

[phatkorean]

You wouldn't happen to have the Power Window Amp and Power Antenna?

Edited: Damn I didn't read your items close enough. I need a Power Window Amp but a new one costs $100. Anyway would you let it go for less then that?

[wesc]

hey, im interested in a few dash pieces_ the box below the radio and the radio brackets ? im not sure what mounting parts are needed because my car never had them. - thanks -
[email protected]

[NISSANDET240]

:aw:
I need left front fender. whats ur location? I oslo sent u an PIM but no respond yet
Im located in south los angeles but im willing to drive 2 to 3 hrs.
depeding on how much do want for the fender.
:D

[MonkeyMagic]

I need a drivers side rear caliper, if you have it i'll buy it from you. Thanks.

[kazuo]

DSL is down at home so I won't be online anytime soon unless I am at work (like now). So apologies for lagging on PMs.

phatkorean: Everything and anything thats on the doors are being sold with the doors unless I don't get buyers for them, sorry. I am waiting on a few buyers for the doors.

wesc: You need L/R Radio brackets and a pocket. Pocket is not available (buy it from a car stereo shop), and I may or may not have the brackets, I will need to look (I have two sets last I checked but I need at least one)

Nissandet240: I live in Frisco but I'll proabbly be in SoCal for D1... I can bring the fender if you want :P

MonkeyMagic: PM me with offer for the caliper, I have it

[NISSANDET240]

:boink: all rite
:bow:
just email me at any of the following emails
[email protected]
[email protected]
[email protected]
OR CELL NUMBER
213 925-6342

[mjjstang]

hey if you still have the manual crossmemeber than im interested, also if you have the clutch hard line or slave cyl. My email is [email protected] I am desperate for these parts. Thanks.

[nanyu]

u still have the front bumper support? how much?
thanx

[brokenben]

i need a sohc power steering pump... let me kno if you have one and how much you want for it.. thanks. also.. is this an item you would be willing to ship to socal?

[p11driver]

i need a new coolant tank, how much would you seel it for? could you ship to socal? thanks.

[andrave]

I need the HUD, email me [email protected]

[MEisGQ]

what color are the doors? if its stock burgundy, i got dibs on both

[kazuo]

Wow I've been behind.

mjjstang: Only have the manual crossmember. PM me if you want it

nanyu: Only have JDM 180SX Front Support. PM me if you want it, its yours for free

brokenben: I have it and if you want I can bring it with me to D1 this weekend. PM me

DeezNuts: Be more specific, I have NFC what you're talkin about...

p11driver: Dont have one, sorry.

andrave: e-mailed you

MEisGQ: They're Silver Green/Dark Grey two tone, I still have them if you want them. Complete w/ power EVERYTHING & Glass

Most of the shit from the car is still available, including ALL interior pieces and complete carpet in perfect shape (the interior is BLACK). Let me know if you need anything guys

[BoroFabulous]

Imin sausalito and am interested in picking up the drive shaft and the radiator support. im only interested in the drive shaft if it is a manual, non abs type, and the guibo hasn't been unbolted without being marked for balance. Mail me please, thanx.

[khemix]

I need a couple things. The Coolant Overflow Resevoir tank I absolutely need. Also the front bumper I need and maybe even both of the front fenders. Shoot me an email if you can: [email protected]

Chris

[kingxsquid]

hey, im located in berkeley

i need a front strut mount if you have one in good condition.

[email protected]

let me know please =D

[Driftguy]

do you have the tension bars for the trunk??
hope you know what im talkin about...
my car came with them missing so my trunk won't stay open..
[email protected]

jimmy
will pay for shippin...
should be just 2 trunk lengthed bars

thanks

[nissantuner22]

how good of condition is the carpet? if its realllllllyyy cherry I'll pay good money for it.

[SauN]

do you have all four brake lines with banjo bolts?

[kazuo]

Ok here we go.. I still have mostly everything available. Full interior minus dash, Rear Trunk Lid, Full Power Doors, Open Diff, Digital Cluster etc etc etc

BoroFabulous: Its a non-ABS JDM Driveshaft. Was removed from the halfcut it came on and was not touched. Unbolted from the differential and pulled from the transmission, nothing else was messed with. If you want it PM me with an offer. Don't have the support anymore, sorry

khemix: Don't have the coolant tank and the front end pieces will not be avilable for a few months, sorry (Decided to rock the Onevia look until I get $$$ to spray Silvia panels)

kingxsquid: No mounts, sorry

driftguy: Didn't take them out of the parts car :(

nissantuner22: It's PERFECT, its in better shape than my "new" carpet... its grey in color. No stains whatsoever. I'm too lazy to swap carpets and the defects in my new one are where the floormats go, so I don't care... :) PM me to make an offer for the carpet.

SauN: Don't have the lines at this moment, sorry. Hit me back in a month or two and I'll have them.

[zero.counter]

I need the thermostat housing for the KA24E, I can do $8 shipped if you can...:) Let Me know! Thanks!

[91240sxhatch]

do you have stock catback exhaust in descent conditon, i live in santa cruz, let me know, my email is [email protected], i dont usually check pms

[nissantuner22]

still interested in carpet!

[jy116]

U got the battery tie down? And the tire jack iron... o yeh, and is a zenki rear bumper same as chuki? If so, Ill buy urs if its cheap, mine has a weird warp in the middle. I can pik up asap since Im close and on break soon.

[kazuo]

jy116: No No Yes Don't have it sorry (the car got hit on the rear/side of rear)

91240sxhatch: I have the catback but I need to keep it, sorry :(

nissantuner22: send me a PM, I think I figured it out :P

[DoriftoSlut]

I need the stereo plug on the car side of the interior harness. The stock one that all the clusterfuck of wires pins into and that the stereo plugs into. Mine was lobbed off, and i have a converter harness that plugs right into S13 harness. Thanks.

[kazuo]

Sorry, dont have it, deck got jacked and they cut it.

[TakeTheTurns170]

How much for center console and front driver side wheel well cover?

[kazuo]

I have the center console but its for an AT and I have the wheel well cover. Shoot me a PM

[RacerX_S13]

I need the trunk lid. PM me with how much you want for it if it is still available.

[mdigiamm]

i need the rear bumper.. how much u want for it if u still have it?

[nissantuner22]

the center console trim piece ( that covers the radio and shifter) is universal, its the same as the automatic and sticks. just thought id let ya know!

[Bdawg]

hey, all i need is the stock hood hinges, not the whole hood or the latch... just the hinges... depending where u r located in norcal i might be bale to pick them up if u have them as soon as u respond....

B

[jy116]

No rear bumper ppl... i asked for it too

[Yoshi]

bumper support the same as the 91+ s13?
if so, is it too heavy to ship? I need one ASAP

[huevos]

you got the ka engine harness? would you be willing to sell it seperate from the motor?
if so, how much?

[doriftomunkee]

I Want The Driveshaft..how Much..i Need It Now..thanks

[doriftomunkee]

email me at [email protected]

[kazuo]

DeezNuts: No wheels for sale.

RacerX: PM sent

I don't have the rearbumper or exhaust!

Nissantuner: DUDE, I keep forgetting about you man... getting caught up trying to make my new car run. I'll PM you my email addy right now and shoot me an email and I will get you that carpet ASAP.

Yoshi: I have a JDM 180SX Support you can have for free if you want it. Don't know if it will work or not. I can maybe send it up there with that NinjaGaiden guy... hes going your way in a few weeks

huevos: I have the harness but it was cut at the firewall grommet. Yes I have both pieces of it. Let me know if you want it

I still have lots of shit...seatbelts, full BLACK interior, Digital Cluster w/ HUD and subharness, etc etcetc

Buy my crap!

[nissantuner22]

haha, i emailed you. thanks!

[khemix]

Ok here we go.. [B]
khemix: Don't have the coolant tank and the front end pieces will not be avilable for a few months, sorry (Decided to rock the Onevia look until I get $$$ to spray Silvia panels)

That's fine man, I wont be able to get them for a couple months I just found out. Maybe we can work something out. PM me.

Chris

[justin]

Any chance you have the factory air dam under front bumper, I don't know if XE's had them. Willing to pay $25 Plus shipping if you have it. Thx, Justin

[heartofnismo]

do you still have s13 fenders???...sorry if you dont...didnt feel like reading all the posts...

[derux]

I sent you a PM