PDA

View Full Version : 18x9.5 +35 offset fitment


bruce_240sx
02-04-2012, 04:54 PM
I know this has been covered before but looking to see if 18x9.5 +35 with spacers will fit on a 1990 240sx hatch Front. looking to see what size spacers and tire size will be needed I have megan coilovers.

tunermt
02-04-2012, 10:51 PM
I run 18x10.5 15mm with 5 mm spacer front with a 265/35/18 on both JIC coils and Buddy club coils. I would recommend a 20mm spacer, you may get away with a 15mm but that is gonna be tight :)

Bubba
02-04-2012, 10:56 PM
Best bet would be to look through the Wheel Fitment Whore thread and the Maximum Rubber (anti-stretched tire) threads. They act as a "will this fit" database basically. There is also a separate site geared towards wheel fitment and you can search it by wheel size... www.RimTuck.com (http://www.RimTuck.com)

Good luck. Write that site down before this thread is deleted, Haha.

Dominic Axelson
02-04-2012, 11:08 PM
Depending on what coilovers & camber you are running. You will need about a 20mm spacer to clear your suspension.

tunermt
02-05-2012, 02:07 AM
once the suspension is cleared your in the clear just mod the body to fit haha ;) note you will have to space the wheels out even further via lca if you are also looking for lots angle without rubbing the boddy/frame/tension rod