PDA

View Full Version : NV FS: SR T3 turbo swap, S14sr20 block/head, R33 front brakes and more sr stuff


lv240s14
02-02-2012, 03:17 AM
Sr20 T3 Turbonetics full turbo swap. Includs: T3 turbonetics turbo, Turbonetics wastegate, all lines, manuel boost controller, top mount manifold, mid pipe, Intake piping and dump tube. I checked with turbonetics turbi is good for about 400 whp and should spool fast because of its small size.
800 OBO
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0822.jpg
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0821.jpg
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0824.jpg
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0823.jpg
S14sr block, needs to be honed comes with crank with good bearings rods and everything else. You just need new pistons.
400 obo
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0816.jpg
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0817.jpg
R33 front brakes with s14 knuckles and 5 lug hubs
350 OBO
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0840.jpg
S14sr valve cover
100
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0818.jpg
FMIC with greddy RS bov made to be used on s14sr with top mount turbo
400 OBO
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0820.jpg
S14sr starter 80 OBO
s14sr alternator 100 OBO
s14sr power steering pump 80 OBO
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0828.jpg
AFC Neo with wiring harness
220 OBO
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0831.jpg
s14sr coils pack 60 OBO
240sx 3" high flow cat
100 OBO
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0833.jpg
Random turbo timer
20 OBO
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0834.jpg
Aluminium raditor about 1 1/2 inch think for sr20
100 OBO
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0835.jpg
S14sr CAS 80 OBO
s14sr VTC sensor 50 OBO
s14sr ignition whatever 50 OBO
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0837.jpgRandom FAZE boost and s13 5speed drive shaft
80 OBO
s14sr trans
200 OBO
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0841.jpg
RX8/miata enduratech coilovers with extra 9k front srpings brand new in box
1000 OBO
http://i46.photobucket.com/albums/f105/Guildjs/things%20to%20sell%202%202%2012/IMG_0842.jpg
Stance s14 gr plus coilovers
1000 OBO

Pm me if you want something I have in this post.
I am willing to ship at the buyers expense. I will not overcharge for shipping.
Paypal or cash

lv240s14
02-02-2012, 03:23 AM
also s14sr injectors 80 obo

otto_3478s
02-02-2012, 11:02 AM
Block price shipped to 77066? Also why does it need honed? To just get rid of the ridge? Pictures dont really do it justice...

lv240s14
02-02-2012, 04:53 PM
Block price shipped to 77066? Also why does it need honed? To just get rid of the ridge? Pictures dont really do it justice...

The piston melted and I always over do things so I would get it honed to just make it 100%. could just clean it up and use it. I will pm you.

Seraphim38
02-02-2012, 05:43 PM
slightly tempted to buy the manifold, downpipe, wastegate and dump tube, to mount a 3071 on it...

I already have a GT2871R and think that this turbo setup might respond slower than what I already have, though when it gets into t3/t4 turbo land I don't really know much about all the different specs. When it stays in Garrett specs I get it, but outside that there's too many different configurations for me to understand how to compare them...

BryanR00
02-03-2012, 06:15 AM
Sell me those bolt on spacers.

lv240s14
02-03-2012, 01:45 PM
Ok pm me an offer they look like 15mm ones

BryanR00
02-03-2012, 02:16 PM
If they're 15's I'll take them but they look like 10's to me which I kinda don't want. I need 15's but I may get them anyway.

lv240s14
02-05-2012, 12:18 AM
Exedy clutch and sr head is sold

lv240s14
02-07-2012, 01:53 AM
Bump bump bump

lv240s14
02-15-2012, 11:31 PM
Alot of interest in the turbo kit but no buyers yet

rms13
02-16-2012, 11:41 AM
Good price on parts. Thanks!

Nicelyphe
02-16-2012, 12:28 PM
Willing to part with the turbo? If so how much shipped 18018.

Destructodc74
02-16-2012, 02:19 PM
ill take the injectors, check your pms

lv240s14
02-16-2012, 03:37 PM
ill take the injectors, check your pms

sorry sold.
I edited the fron post and added some coilovers I have for sale

lv240s14
02-16-2012, 05:24 PM
I also have a q45 throttle body for sale for 60.

lv240s14
02-18-2012, 10:20 PM
Willing to part with the turbo? If so how much shipped 18018.

pmed you with no reply. did you get it?

lv240s14
02-20-2012, 03:34 PM
last bump before I start another thread...

jeff kelly
02-20-2012, 06:00 PM
how much for the starter shipped to 19111

lv240s14
02-21-2012, 04:07 AM
how much for the starter shipped to 19111

Pm replied.

lv240s14
02-24-2012, 03:17 PM
afc neo is pending

oaksman513
02-24-2012, 05:39 PM
Is the turbo dual ball bearing? Any shaft play? Picture of the compressor wheel/blades? I will pm you my contact info. Thanks.

lv240s14
02-25-2012, 04:10 PM
Is the turbo dual ball bearing? Any shaft play? Picture of the compressor wheel/blades? I will pm you my contact info. Thanks.

Pm sent to you good sir

lv240s14
02-28-2012, 04:48 PM
bump throw me some offers guys

MURPHY
02-28-2012, 07:33 PM
How much for the rotors, calipers and possibly spacers too?

Please pm me!

lv240s14
02-28-2012, 11:44 PM
How much for the rotors, calipers and possibly spacers too?

Please pm me!

Pmed you sir

mike99101
02-29-2012, 04:56 AM
I would love more information on the turbo. Ball bearing ? Condition etc.
Thanks
Mike

lv240s14
02-29-2012, 07:49 PM
Turbo is a super 60 with a 3 inch inlet Journal bearing turbo with no shaft play. Spooled up full at about 3500 rpm on a stock s14sr and can make about 400 whp. I think it's a great setup for a daily/ track car.

lv240s14
03-03-2012, 03:38 PM
bump I got alot of people who just seem to flake out at the last second...

lv240s14
03-08-2012, 03:51 AM
Does this forum have any non flankers I mean really people. You know who you are.

lv240s14
03-09-2012, 03:15 PM
bumping this during the day should help with peole seeing it. this forums makes the fs threads go down on the list so fast...

BryanR00
03-09-2012, 03:45 PM
bumping this during the day should help with peole seeing it. this forums makes the fs threads go down on the list so fast...

Yea that's why I don't understand why there is a 2 bump limit. That's the dumbest shit I've ever heard. This forum is way too active to have a limit on bumps.

lv240s14
03-13-2012, 02:07 AM
bump for people saying they will pay but then not...

dans14.5
04-06-2012, 08:16 AM
I need the turbo please pm me for the price just the turbo if you're willing to part them out