FS/FT 280z L28et part out

[richard5vgy]

Alright, well i have a 76' 280z that I swapped in a L28et. I have stripped the car so its bare bones shell with some power to move it. I have posted the car as a whole for sale or trade. I really want a S13 again. So for the goodies. It's a 76' with a 81' turbo engine. I bought a complete donor car, drove it home pulled and dropped it in. The engine has a newer turbo from a 300zx, FMIC with custom piping hks ssqv bov, it also has SVO mustang injectors with a custom 1/2" ID fuel rail. BEGI fpr manual boost controller set at 12psi. It also has a large oil cooler. Fidanza aluminum flywheel and sacs 6 puck clutch. T5 tranny from a 83' turbo Z. welded diff is a R200, the electrical is setup simple on toggles mounted on the dash. RCI 12 gal fuel cell with sending unit. Has maxima calipers and 280zx rotors in the rear so 4 wheel disc. Stainless brake lines all round as with new pads rotors seals calipers on all four. I do have the title as well but obviously not an issue if its parted. I would like to sell or trade the whole car but will part, if the swap is sold first then the rest can go. I would like 2k for the swap engine tranny harness oil cooler flywheel clutch and matching drive shaft and pinion yoke. the rest we can negotiate. pm me or text me at 505-614-4071 names Rich hope to hear from ya.

[richard5vgy]

bump.. new price 3k for whole car, half what i have into it. need cash to finish 510

[Sito]

That is a good setup, bump for fellow 280z owner.

[sr20detS15]

are you parting the car out or just the engine? if so how much for the air dam and maybe some other parts?

[Sito]

What suspension? If you were closer I'd actually probably pick this up...
If you part out lmk. I'm interested in the rear 280zx brake setup along with the stainless brake lines and possibly other parts.
Someone should snap this up and just finish her, most everything is there.

[richard5vgy]

are you parting the car out or just the engine? if so how much for the air dam and maybe some other parts?



Its for sale complete. If not then its a complete part out. The airdam and rear disc are sold to my brother for his Z if the whole car isnt sold sorry man.

It is all there too honestly a jim wolf technologies ecu and maf swap and she'll roar. I have uncut doors and full interior panel set too. Options you know

suspension is stock a chopped the springs to settle her down a bit

[los_inc]

how much for the dizzy and the coil shipped to 10036

[richard5vgy]

Dizzy is 81 timing cover mounted is that the one you're looking for?

[richard5vgy]

I am parting out no bites on complete car.
L28et long block 500.00
Turbo Manifold 150.00
Intake mani with 240sxyou tb and spacer 175.00
Custom Fuel rail 100.00
svo injectors x6 150.00
Fidanza flywheel 300.00
Intercooler piping for Z 150.00
No name huge fmic 75.00
Turbo harness with ecu 200.00
Igniter 75.00
MSA three piece spoiler 250.00
Iron cross wheels 100.00
Rear disk brake conversion maxima calipers 200sx. Rotors with pads and maxima brake lines 300.00
American racing ansen sprint knockoffs 200.00 set of 5 light weight
Stainless brake lines front and rear 60.00
Begi fpr 150.00
If there is a group of things wanted ill work out pricing a little. If there is something I missed let me know.

[Sito]

I'll take FMIC, intercooler piping, rear disc brake conversion, stainless brake lines front and rear. Whats the condition of the Mustache bar?