Removing KA checklist...

[jacobzking]

I know that most of this information is on here, at least in bits and pieces and what not, but I'm about to pull the KA out of my s14 and just want to make sure everything is unbolted and ready to go. I'll list what's unbolted, disconnected and tell me if I'm overlooking anything. Thanks in advance!

Driveshaft mount removed so the yoke can slide out easier
L & R engine mount top bolts removed
Radiator, fan shroud, fan, air intake all removed
Cat unbolted at down pipe
PS lines disconnected
Heater hose disconnected
ECU harness removed and pulled through firewall

Anything I'm overlooking?
Probably some ground wires that need to be undone?
Will the header come out with the car (clear the steering rack)?

Thanks guys! Its been about 5 years or more since I've pulled one of these... no, 7 years plus.

[90240sx07]

think the header will but not the down pipe should be 2-3 bolts to undo that and theres a couple of grounds on the firewall trans bolts or undo the trans x member and driveshaft and tranny harness if your pulling the trans with it

[jacobzking]

think the header will but not the down pipe should be 2-3 bolts to undo that and theres a couple of grounds on the firewall trans bolts or undo the trans x member and driveshaft and tranny harness if your pulling the trans with it

will the down pipe how the steering rack, is that the issue?

[project-c2]

Throttle cables, fuel line and return line, engine harness, starter cable and alternator cables.

[jacobzking]

Throttle cables, fuel line and return line, engine harness, starter cable and alternator cables.

got the fuel lines already but completely forgot about throttle cable and starter cable. thanks mate!

[90240sx07]

will the down pipe how the steering rack, is that the issue?

believe it was cuz of the steering rack and it hitting it if i remember right

[Walperstyle]

There is a DVD that teaches you absolutely everything. Josh makes DVD's also telling you how to rebuild engines too. Anyone with an SR or KA should buy all of his DVD's. They are a must have, with the FSM (that you can also DL off his site)

I would make a copy and share with people if it wasnt for he's a good guy, with a couple kids to feed! He's a good man.

www.240SXTECHDVDS.org S13 KA24DE Removal DVD (http://240sxtechdvds.org/S13_KA24DE_Removal_DVD.html)

http://240sxtechdvds.org/sitebuilder/images/JDS_PERFORMANCE_SR20DET_www_240SXTECHDVDS_org_S13_ KA24DE_REMOVAL_DVD_COVER-599x600.jpg

[project-c2]

got the fuel lines already but completely forgot about throttle cable and starter cable. thanks mate!

np. If equipped with A/C, I would unbolt the compressor from the engine, so you don't have to open the refridgerant lines.

[240 dream]

im about to do the same thing do to a possible timing jump and possible cracked cylinder wall:( so i definatly need the same info haha:)