PoorMans180SX
01-29-2012, 10:54 AM
Alright, here's the deal. I have two basically complete DE swaps, but both need work. Prices are negotiable, and you can mix and match. First I'll give the basic run down, and descriptions after that.
I have:
1 Complete DE engine that needs bearings
1 Complete, good DE engine that needs to be put back together. (no injectors)
1 Emissions deleted intake manifold.
1 Aftermarket header
2 Stock flyweels
1 Stock clutch
1 XTD Stage 3(?) clutch
1 Good transmission (no shifter)
1 Transmission with 2nd gear grind (no shifter)
1 Auto wiring harness and ECU
1 Manual harness and ECU
1 Auto trans
4 SR 270cc injectors with fuel rail.
The engine that needs bearings was taken out of my friends car. It was running great and had ZERO KNOCK when we pulled it. He had just had the head rebuilt. I bought it from him because I knew (thought) it was perfect. When I pulled the pan to check the bearings this is what I found:
http://i24.photobucket.com/albums/c25/Turbo711/personal/215148_530597348017_151600857_30799728_40101_n.jpg
You can see the bearings are just starting to go, meaning you shouldn't need to cut the crank or recondition the rods.
Here's the whole engine:
http://i24.photobucket.com/albums/c25/Turbo711/personal/IMG_1192.jpg
The other engine I got with a shell. It was an automatic and is extremely clean on the inside. It has good compression as far as I can tell and turns over like butter.
http://i24.photobucket.com/albums/c25/Turbo711/personal/IMG_0996.jpg
I have it disassembled to this point:
http://i24.photobucket.com/albums/c25/Turbo711/personal/228823_530602886917_151600857_30799774_7050571_n.j pg
http://i24.photobucket.com/albums/c25/Turbo711/personal/268642_530617841947_151600857_30800244_1770657_n.j pg
But everything is there minus injectors.
I'd like $250 for the one that needs bearings (complete: wiring harness, ECU, all accessories, stock clutch and flywheel)
$200 for the disassembled one as is (complete: same as above minus injectors.)
$50 for the good trans
$25 for the grinding trans
$50 for the SR injectors and rail
and $50 for the XTD clutch if you buy an engine.
Please post or PM if you're interested in anything. Thanks.
I have:
1 Complete DE engine that needs bearings
1 Complete, good DE engine that needs to be put back together. (no injectors)
1 Emissions deleted intake manifold.
1 Aftermarket header
2 Stock flyweels
1 Stock clutch
1 XTD Stage 3(?) clutch
1 Good transmission (no shifter)
1 Transmission with 2nd gear grind (no shifter)
1 Auto wiring harness and ECU
1 Manual harness and ECU
1 Auto trans
4 SR 270cc injectors with fuel rail.
The engine that needs bearings was taken out of my friends car. It was running great and had ZERO KNOCK when we pulled it. He had just had the head rebuilt. I bought it from him because I knew (thought) it was perfect. When I pulled the pan to check the bearings this is what I found:
http://i24.photobucket.com/albums/c25/Turbo711/personal/215148_530597348017_151600857_30799728_40101_n.jpg
You can see the bearings are just starting to go, meaning you shouldn't need to cut the crank or recondition the rods.
Here's the whole engine:
http://i24.photobucket.com/albums/c25/Turbo711/personal/IMG_1192.jpg
The other engine I got with a shell. It was an automatic and is extremely clean on the inside. It has good compression as far as I can tell and turns over like butter.
http://i24.photobucket.com/albums/c25/Turbo711/personal/IMG_0996.jpg
I have it disassembled to this point:
http://i24.photobucket.com/albums/c25/Turbo711/personal/228823_530602886917_151600857_30799774_7050571_n.j pg
http://i24.photobucket.com/albums/c25/Turbo711/personal/268642_530617841947_151600857_30800244_1770657_n.j pg
But everything is there minus injectors.
I'd like $250 for the one that needs bearings (complete: wiring harness, ECU, all accessories, stock clutch and flywheel)
$200 for the disassembled one as is (complete: same as above minus injectors.)
$50 for the good trans
$25 for the grinding trans
$50 for the SR injectors and rail
and $50 for the XTD clutch if you buy an engine.
Please post or PM if you're interested in anything. Thanks.