PDA

View Full Version : CA Big Brakes for a 240z Rebuilt S12+8 Calipers


Vikter138
01-25-2012, 06:54 PM
Was going through my garage and found a pair of rebuilt calipers I bought for my old 240z big brake kit I never got around to. I don't remember all the detail to the swap but I know that these 4 piston calipers bolt right on. I'm pretty sure you need vented rotors. If I find the info I'll put a link.

$170 w/o shipping

http://i4.photobucket.com/albums/y143/vikter138/3d31f670.jpg

http://i4.photobucket.com/albums/y143/vikter138/d16787fe.jpg

http://i4.photobucket.com/albums/y143/vikter138/0cdb9e13.jpg

I'm located in Fullerton, Orange County

Driven08
01-26-2012, 12:14 AM
You should add the part # off those boxes(if they are the correct boxes) so someone can cross reference the number. Just to help your sale

iLagX
01-26-2012, 12:53 AM
they almost look like 300zx cast iron brakes

Bushido
01-26-2012, 06:49 AM
These are Toyota 4 runner brakes right?

91240syes
01-26-2012, 07:04 AM
They look like it, cause one piston is smaller then the other.
Bump for a decent brake upgrade for a fellow s30 owner.

LeaS13Zenki
01-26-2012, 09:38 AM
These are Toyota 4 runner brakes right?

No 4runner calipers are much larger and and have the mounts to the knuckles at a different angle.

GLWS thought BTW would these happen to fit a s13/s14

Vikter138
01-26-2012, 09:51 AM
I can't remember if they are off a 4runner or a 4x4 truck or both.
I know the early model calipers were S12 and it was a direct bolt on with non vented calipers. These are the S12+8 and I believe are for a vented caliper without having to worry about the caliper hitting the wheel. There is also a S12W that is almost the same as these but is a little wider and you can't use stock wheels.

In 06 I use to own a brake company and I sold these all the time. They help out the old czars big time when it comes to braking. Way less brake fade when you have bigger pads an a better rotor to work with.

I will take pictures of the box and post them so you guys can see the centric part number.

Vikter138
01-26-2012, 12:50 PM
Picture of the boxes with the part numbers as asked for

http://i4.photobucket.com/albums/y143/vikter138/96613b19.jpg

Vikter138
01-31-2012, 12:17 PM
there any s30 guys out there?

Blackzenki82
01-31-2012, 03:24 PM
Too bad I'm going S13 front susp. on my S30, otherwise I'd deff scoop these up, GLWS.


and yes, 87/88 toyota 4x4 calipers are a direct 4 piston caliper swap onto S30 knuckles/rotors for anyone with fitment ????'s.

Vikter138
01-31-2012, 05:58 PM
Thanks for clearing that up

Vikter138
02-06-2012, 11:02 AM
bump for some nice a early z caliper upgrade

Vikter138
07-29-2013, 07:54 AM
It's been a while bump