where are u guys buying METRIC rod ends at?

[godrifttoday]

so i need to replace 2 of my rod ends but i cant really find what im looking for, i found some at DWTM-14: DWTM - Midwest Control Products Corp. (http://www.midwestcontrol.com/part.php?id=3001) but the static load is only 7000 would this be enough? they will be used for the rear upper control arm. the thread i need is M14 X 2.00. i called them and the guy had recommended chromemoly but they dont have any with 2.00 pitch. any links would be great thanks!

[Perfect Balance]

An Aurora rod end in the same size has about a 8,000lb static load capacity, at least for their general purpose rod end. The high strength ones are about 16,000lb load capacity. I'm not sure which ones are typically used though.

[donabeast]

FK rod ends are much better quality go to kartek.com to get the part # call and ask for baja mike

[slider2828]

I use that specific one for a rear traction rod end.... held up to 2 track events so far...

[godrifttoday]

Question is what is the bare minimum static weight recommended? I know if I'm in the 17k range I'll be more than fine.

[slider2828]

Probably would go to nissanroadracing.com and ask that question.

[godrifttoday]

just called kartek.com and they dont carry them they recommened rod end supply.com let me check