4x ka24de part outs!! and one sohc chassis, going to the scrap yard

[Couped_up'd]

3x s13 valve covers $20.00 each

2x ka24de fuel injectors with rails **$30.00 each

2x s13 alternators ka24de 20.00 each

1x s13 aternator ka24e 20.00

4x ka24de throttle bodys

3x ka24de clutch and flywheels $20.00 each

1x set of manaul trans bolts $20.00

2x set of flywheel bolts and clutch $20.00

1x good ka24de head $30.00

3x sets of 248 cams exhaust cams (also have intakes) $20.00 each

2x ka24de s13 intakes $20.00 each


1x ka24de s14 intake $ 30.00

2x ka24e manaul ecu $10.00 each

1x sohc cluster $10.00

2x s13 climte controls $20.00 each

2x s13 exhaust manifold $15.00 each

1x sohc valve cover $15.00

1x sohc intake manifold $15.00

2x sohc maf $20.00

4x power steering pumps ka24de $20.00
2x ac compressors $20.00

1x sohc wire harness...good for converting $25.00

2x power door panels left and right. 25.00 each

ANYThHING off 5x ka24de motor sets about to get scraped. If you want pictures, i can arrange for that to happen. Just scraping all this crap, i guess it should be offered for good use before it gets scraped

[Couped_up'd]

S14 cams $20.00 each

S14 valve cover 30.00

Hardline s13 $25.00 Slave cylinder with softline $15.00 Master cylinder$10.00 Manaul flywheel and clutch bolts 20.00 Manaul trans bolts $20.00 Manual clutch and flywheel $45.00 Throw out bearing with selector $25.00 Manual starter $20.00

[479]

you have any good crankshafts?

and how is the head condition.
seals ok and what not?

[479]

phone is 4794591363. a little faster to get ahold of me
located over in fort smith.

[ryanw501]

do you have a complete s14 ka? text me at 501-516-2358

[90S13hatch_tony]

Ka24de EGR TUBE?? SHIPPED

[Chicago_one]

looking for one of the 248 exh cams. You have PM

[nomma]

was this an auto engine harness? if so i'll buy it. I have to have a auto harness though. there are two connectors that go behind the blower motor if its an auto harness one like 12 or 16 pin and a single blue wire connector.

[KA24DETS14]

How much for a set of the injectors/rail shipped to 30071

[KOME]

Needs the whole Idle air control valve setup(IACV) and a Throttle position sensor is you got either.

[KA240SX808]

Motor Mount Brackets?

[Devens240]

Pm'd you about the 248 cams, i have paypal ready. also may be interested in manual trans bolts.