Driven08
01-23-2012, 07:52 PM
NO TRADES!
Will ship the seat at buyers expense!
Looking to sell my Bride Zeta III w/ Gradation Type-L. Here are some specs on this seat.
"The all new ZETA III Type L is the taller driver's model of ZETA III. The seat is taller and has wider bolsters, tailored for the taller driver. In all black, FRP construction.
Type L is for taller drivers, for smaller drivers, see ZETA III Type S.
Shoulder and side bolsters of ZETA III are purely for seat performance and feature the largest shoulder and side bolster for high driver holding ability.
The frame is very durable and lightweight, and the fabric is all black Bride fabric with buckskin shoulder bolster pads, and a sparkling silver metallic finish on the backing."
Info on seat condition:
-No rips
-Has a little wear, and I say that because its been used
-Scuffs where you mount the seat(not visible when mounted)
-Awesome seat that fits up to a size 34 Waist.
-Real judging from: Quality,material,spring holding fabric, and I don't know of anyone replicating Zeta III's and especially a "L" Model.
Price:$600 Firm.
http://i15.photobucket.com/albums/a396/quadrider08/DSC02032.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02034.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02035.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02036.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02037.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02038.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02041.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02042.jpg
Sr T25/T28,etc Turbo inlet/intake
-Originally was a S14 T28 inlet but was extended to be like an intake.
-Use on any turbo similar to a T25/T28, as long as it has 2 studs on the inlet(Nissan style turbo's)
Price:$53 shipped or $40 local.
http://i15.photobucket.com/albums/a396/quadrider08/DSC02065.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02066.jpg
How it sits mounted up.
http://i15.photobucket.com/albums/a396/quadrider08/DSC02067.jpg
Test Pipe
-Unknown brand
-Never been used or bolted on before
-Will come with hardware if I can find it
Price:$45 shipped
http://i15.photobucket.com/albums/a396/quadrider08/DSC01826.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC01827.jpg
Megan 3" DP w/ Flex Section
-Worked fine but LEAKS due to busted flex section
-Cut and weld a piece for an easy fix.
Price:$30 LOCAL ONLY
http://i15.photobucket.com/albums/a396/quadrider08/DSC01754.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC01756.jpg
Goodridge SS rear lines
-I purchased as Z32 rear conversion lines but thats not the case. You can buy an adapter(cheap) at a fitting store to make them work. Will come with whats shown.
Price:$35 shipped
http://i15.photobucket.com/albums/a396/quadrider08/DSC01828.jpg
Will ship the seat at buyers expense!
Looking to sell my Bride Zeta III w/ Gradation Type-L. Here are some specs on this seat.
"The all new ZETA III Type L is the taller driver's model of ZETA III. The seat is taller and has wider bolsters, tailored for the taller driver. In all black, FRP construction.
Type L is for taller drivers, for smaller drivers, see ZETA III Type S.
Shoulder and side bolsters of ZETA III are purely for seat performance and feature the largest shoulder and side bolster for high driver holding ability.
The frame is very durable and lightweight, and the fabric is all black Bride fabric with buckskin shoulder bolster pads, and a sparkling silver metallic finish on the backing."
Info on seat condition:
-No rips
-Has a little wear, and I say that because its been used
-Scuffs where you mount the seat(not visible when mounted)
-Awesome seat that fits up to a size 34 Waist.
-Real judging from: Quality,material,spring holding fabric, and I don't know of anyone replicating Zeta III's and especially a "L" Model.
Price:$600 Firm.
http://i15.photobucket.com/albums/a396/quadrider08/DSC02032.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02034.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02035.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02036.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02037.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02038.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02041.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02042.jpg
Sr T25/T28,etc Turbo inlet/intake
-Originally was a S14 T28 inlet but was extended to be like an intake.
-Use on any turbo similar to a T25/T28, as long as it has 2 studs on the inlet(Nissan style turbo's)
Price:$53 shipped or $40 local.
http://i15.photobucket.com/albums/a396/quadrider08/DSC02065.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC02066.jpg
How it sits mounted up.
http://i15.photobucket.com/albums/a396/quadrider08/DSC02067.jpg
Test Pipe
-Unknown brand
-Never been used or bolted on before
-Will come with hardware if I can find it
Price:$45 shipped
http://i15.photobucket.com/albums/a396/quadrider08/DSC01826.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC01827.jpg
Megan 3" DP w/ Flex Section
-Worked fine but LEAKS due to busted flex section
-Cut and weld a piece for an easy fix.
Price:$30 LOCAL ONLY
http://i15.photobucket.com/albums/a396/quadrider08/DSC01754.jpg
http://i15.photobucket.com/albums/a396/quadrider08/DSC01756.jpg
Goodridge SS rear lines
-I purchased as Z32 rear conversion lines but thats not the case. You can buy an adapter(cheap) at a fitting store to make them work. Will come with whats shown.
Price:$35 shipped
http://i15.photobucket.com/albums/a396/quadrider08/DSC01828.jpg