1998cc
01-07-2004, 08:52 PM
I need to clean out my garage and get rid of some of these parts.
First I have a custom turbo manifold and downpipe. The manifold has a t3 flange and the downpipe is for an internal wastegate turbo and has a custom o2 sensor installed. A ford .60/.63 turbo would be ideal for this setup. cost $250
Next I have a Garrett T3/T4 turbo for sale.
Specs:
Compressor: .42 A/R, 35mm trim
Turbine: 1.32 A/R, 60mm trim, divided tang design for quicker spool up.
STANDARD T4 FLANGE
Housings can be rotated to fit any particular engine bay configuration. External wastegate recommended.
CONDITION:
-very clean unit without rust, cracks, dents...
-Impellers show no sign of wear and are spinning free
-Minor shaft play not allowing impeller to housing contact.
$225 Takes the turbo.
I also have an mx-6 sidemount. $50
E-mail me at [email protected] for any pics.
First I have a custom turbo manifold and downpipe. The manifold has a t3 flange and the downpipe is for an internal wastegate turbo and has a custom o2 sensor installed. A ford .60/.63 turbo would be ideal for this setup. cost $250
Next I have a Garrett T3/T4 turbo for sale.
Specs:
Compressor: .42 A/R, 35mm trim
Turbine: 1.32 A/R, 60mm trim, divided tang design for quicker spool up.
STANDARD T4 FLANGE
Housings can be rotated to fit any particular engine bay configuration. External wastegate recommended.
CONDITION:
-very clean unit without rust, cracks, dents...
-Impellers show no sign of wear and are spinning free
-Minor shaft play not allowing impeller to housing contact.
$225 Takes the turbo.
I also have an mx-6 sidemount. $50
E-mail me at [email protected] for any pics.