[Many high quality parts][S13 S14 S15][R32 R33 R34] take a look!

[Behind Horizon]

Hello guys,

for sale are stated below parts. All parts are brand new if not stated otherwise.

If you have any questions or if you are interested in the parts just let me know by a private message.

All prices include shipping.

- private offer/sale -

[ Engine Head ]

RB26DETT Inlet Manifold + RB25DET Adapter plates + VCT Relocation Kit + Twin Entry Fuel Rail. Price USD 1300,00 (As a combo with the Bosch injectors = USD 1800.00!)
All the work has been carried out by Nissan engine specialist Zex (http://www.zex-tuning.de), receipts available. You can mount the RB26DETT Inlet Manifold with Individual Throttle Bodies to any RB25DET with these adapter plates.
All ports of the Intake and the adapters were additionaly ported & polished after all parts were ice blasted. Furthermore a VCT-Relocation Kit was built which is enabling you to keep VCT.
Most adapter kit's won't offer you a VCT relocation option and the VCT valve will hit the RB26DETT manifold. Additionaly all ruber pipes of the RB26 intake manifold were replaced by new and genuine Nissan parts.
As the adapter plates relocate the intake manifold away from the block the angle of the injectors isn't correct anymore.
Therefore the injector holes were redrilled, this resulted in a correct position/angle of the injectors.
You can download pictures of the engine built here (http://mir.cr/0MJF7KF5).


http://hankxo.pytalhost.de/IMG_6412.JPG
http://hankxo.pytalhost.de/IMG_6414.JPG
http://hankxo.pytalhost.de/IMG_5977.JPG
http://hankxo.pytalhost.de/IMAG0116.jpg
http://hankxo.pytalhost.de/IMAG0118.jpg
http://hankxo.pytalhost.de/IMAG0120.jpg
http://hankxo.pytalhost.de/IMAG0123.jpg


[ Fueling ]

6x Bosch Injectors 440cc (480cc 550cc 600cc) Top Feed, EV 6 CS incl. Plug . Price USD 600,00 (As a combo with the manifold conversion = USD 1800.00!)
These injectors are brand new and fully functional and are originally beeing used by Porsche in the GT3. Original price was ~700,00 EUR, Bosch part number 0280156012,
high impedance 12 Ohm, max. 8 bar fuel pressure, can be used on 6 bar pressure all day long, the performance depends on the fuel pressure:

453cc @ 43.5 psi/3 Bar (standard-pressure), max. ~400hp,
480cc @ 49 psi/3.4 Bar, max. ~450hp,
555cc @ 65 psi/4.5 Bar, max. ~500hp,
600cc @ 76 psi/5.2 Bar max. ~550hp,
640cc @ 87 psi/6 Bar, max. ~600hp

RB20DET & RB25DET NEO - plug & play
RB25DET - you will need a Greddy/Freddy Inlet Manifold + top feed rail + use included plugs
RB26DETT - you have to remove/bypass the small resistor pack see here (http://www.skylinesaustralia.com/forums/topic/62674-gtr-injectors-into-rb20det/)

Datasheet downloadable here (http://www.bosch-motorsport.de/pdf/components/injection_valves/EV_6.pdf), a good FPR is for example the "FSE Motorsport 6 Bar" (http://www.isa-racing.com/index.php/cat/c667_Motorsport-Benzindruckregler.html),
every good mapper can work with these injectors, same performance and quality as Nismo injectors but much cheaper.

http://hankxo.pytalhost.de/24012008319.jpg
http://hankxo.pytalhost.de/IMAG0062.jpg




[Cooling]


Custom made 3"/76mm Intercooler piping. Price USD 200,00
Powdercoated in black,comes with four black Samcos (4x 76mm an 1x 90° 3" to 2.5") and high quality pipe clamps, with HKS SSQV flange, will fit any FMIC-Intercooler with 3" Inlets. You can modify the piping with additional Samcos to fit your SR20DET or CA18DET but it will be Plug & Play with a RB25DET + Greddy or RB26DETT Manifold or RB26DETT in your S13/S14/S15. The battery has to be relocated to the boot.

http://hankxo.pytalhost.de/IMAG0081x.jpg




Samco RB25DET coolant hoses / water hoses. Price USD 70,00
Modified to fit RB Swaps in S13/S14/S15 chassis.

http://i1.frsimg.com/images/detailed_images/Samco_TCS84C-BL_1.jpg


[ TURBO ]

Garrett 0.63 exhaust housing (ceramic coated + V-Band), T3 flange. Price USD 340.00
Will fit: GT3071R, GT3076R, GT3082R, GT35R (GT3582R), GTX30**R, GTX35. Do you want more response from your Turbo with less heat in your engine bay? Then swap your large exhaust housing for this smaller, ceramic coated one.

http://hankxo.pytalhost.de/gt35rturbinehousing.jpg





[Suspension/Steering]


GP-Sports G-Master Hyper Knuckle Kit. Price USD 900,00
Made for Drifting to dramatically increase the steering angle. Very rare and worldwide seeked. Plug & Play with S14's & S15's, will fit S13's also with front S14 knuckles and bearings/hubs. You will find more information about them here: 1 (http://www.jdmop.com/gpsports.html) 2 (http://www.chromjuwelen.com/de/partner-und-mitglieder-blogs/jpcnews.blogspot.com/gp-sports-release-hyper-knuckle-kit-for-silvia/laurel.html) 3 (http://www.gpsports.co.jp/otr/knck/roll.html) 4 (http://www.gpsports.co.jp/otr/knck/angle.html) 5 (http://www.gpsports.co.jp/otr/knck/joint.html)

http://hankxo.pytalhost.de/GPSports_HyperKnuckle.jpg
http://hankxo.pytalhost.de/IMG_2278.JPG
http://hankxo.pytalhost.de/IMG_2281.JPG



[Braking]


Project Mu LEVEL MAX900i rear brake pads, for R33 GT-R. Price USD 180,00

http://hankxo.pytalhost.de/DSC00082.JPG



[Electronics]


RB25DET Power Transistor / Ignition Amp / Transistor Ignition unit / Ignitor Amp 22020-97E01. Price USD 70,00

http://hankxo.pytalhost.de/IMG_1778.JPG

[Brock864]

sent you a pm! get back at me!!!

[KOUKIboy]

Daaammm!!!! that RB26 gave me a hard on!!!! lmao that shit is sexxxy!!!! GLWS.....

[P-Funk alot]

hey i see you have the psyco mount kit at least i think you do. wanna sell the motor mounts mine split. and also would you be interested in selling the coil pack cover

[Behind Horizon]

Daaammm!!!! that RB26 gave me a hard on!!!! lmao that shit is sexxxy!!!! GLWS.....

It's actually an RB25DET, so no jizz in your pants...

hey i see you have the psyco mount kit at least i think you do. wanna sell the motor mounts mine split. and also would you be interested in selling the coil pack cover

PM

[Walperstyle]

I need that garrett exhaust housing, but you live in Germany.... I live in Canada. The shipping is going to be too much.

...can you get me a part number at least for that exhaust housing? And confirm for me its a .63 AR, and not one of the larger ones.

[Behind Horizon]

Shipping is included in the stated above prices.

[RB240zDET]

Sigh, wish it was converted for the RB20. Great parts and good luck with the sale. Free bump for you.

[speedracer1610]

Do you have the front rotors as well? if so make me a package deal. thanks

[new dood s13]

do you still have the coolant hoses? and are you willing to sell the timing belt?

[Behind Horizon]

Do you have the front rotors as well? if so make me a package deal. thanks

do you still have the coolant hoses? and are you willing to sell the timing belt?

You have a PM!

[Behind Horizon]

: up : : up : : up :

[ludeboi]

bumpin some sexy stuff...if i had that money id be all over that rb26...some good stuff man...glws

[Driftingcorners]

project muuuu /drool

[TurboStrong]

would you part out that oil sandwich that you got on her?

im trying to piece up an oil relocation to cooler on my 26

[Behind Horizon]

bumpin some sexy stuff...if i had that money id be all over that rb26...some good stuff man...glws

It's not an RB26 it is an RB25 with RB26 manifold.

would you part out that oil sandwich that you got on her?

im trying to piece up an oil relocation to cooler on my 26

Sorry, I have sold the engine already, just have the RB25 to RB26 manifold conversion left and other parts which I am stating here.

[TurboStrong]

It's not an RB26 it is an RB25 with RB26 manifold.



Sorry, I have sold the engine already, just have the RB25 to RB26 manifold conversion left and other parts which I am stating here.

pic of the manifold please!

[Behind Horizon]

pic of the manifold please!

Check the first post please.

[Behind Horizon]

: up : : up : : up :

[mike10562004]

hella deals

[Behind Horizon]

hella deals

Thanks!

> Updated the prices for the manifold and injectors.

[Behind Horizon]

: up : : up : : up :

[Behind Horizon]

: up : : up : up :

[Nismo11]

That RB looks pretty sick! Glws

[kei1]

do you still have the igniter for sale?

[jerry_beans]

How much for knuckles shipped to 79928

[Future240]

Over the 2 bump limit, you can start a new thread in 3 days.