FS: 2JZ V160 (6speed) to 240 mounts, V160 and S15 rear end/diff!!

[CDriver]

I was going to build a 2JZ V160 (6 speed) S14 but my plans have changed.

I have a V160 in great shape from a J-Spec Supra with only 33,000 KM that's only about 21,000 miles!! It comes with the flywheel, shifter (shorter one), clutch slave cylinder, clutch, flywheel bolts, pressure plate and new aluminum shifter bushings. I was just going to run a heavier pressure plate (RPS) with the stock clutch disc and flywheel like I did in my Supra to hold up to 650tq. My Supra made 670whp and I never had a problem with slippage.

V160: $3200 shipped to lower US 48. Check around and you will see this is a good deal!

https://lh3.googleusercontent.com/-kjeXptc2omU/Txb8MPlshYI/AAAAAAAABfQ/E7nPA7xqvao/s700/2012-01-17_14-45-59_476.jpg

https://lh4.googleusercontent.com/-nB_oDwD2qII/Txb8XsNLY7I/AAAAAAAABfk/ohsFlb7FcJE/s700/2012-01-17_14-44-49_476.jpg

https://lh3.googleusercontent.com/-uhHXJAdGeY4/Txb8GIxoHkI/AAAAAAAABfo/ZXvf63AVgaw/s700/2012-01-17_14-45-15_961.jpg

https://lh6.googleusercontent.com/-XlvDaxmMfqA/Txb8R1mkz2I/AAAAAAAABfw/zSplDSiOtg0/s700/2012-01-17_14-46-18_257.jpg

https://lh5.googleusercontent.com/-EuchcC0RGAc/Txb8QMB6R4I/AAAAAAAABgY/irHcaNgASUI/s700/2012-01-17_14-46-25_609.jpg

https://lh4.googleusercontent.com/-lBOm5X-lEok/Txb7-yWCqwI/AAAAAAAABgA/hMEAhtW8A4Y/s700/2012-01-17_14-42-25_265.jpg

https://lh4.googleusercontent.com/-Ohl9kckufbU/Txb8BhHTyvI/AAAAAAAABgQ/VOMqqdR4ykw/s700/2012-01-17_14-42-56_942.jpg

https://lh4.googleusercontent.com/-5aSFGmfMe00/Txb7_QDE4tI/AAAAAAAABgI/nFx6qVT2l3U/s700/2012-01-17_14-42-40_507.jpg

Freed Engineering 2JZ and V160 Motor and Trans mounts for 240sx: $450 shipped to US. I paid $500 plus shipping for these.

https://lh5.googleusercontent.com/-OMA61hGgy4Y/Txb7-NkaLeI/AAAAAAAABf4/u0fM7rfyPmk/s700/2012-01-17_14-41-08_406.jpg

S15 Complete Rear End with HLSD Diff with 3.692 ratio: $550 shipped to lower US 48.

https://lh5.googleusercontent.com/-P9WswsQ1p5E/Txb8YMaKR2I/AAAAAAAABgg/V5LI2JfJTIE/s700/2012-01-17_14-56-29_217.jpg

Package Deal $4000 shipped to Lower US 48.

Please PM, post here or e-mail me at [email protected]

Thanks
Chris

[crunkride]

Hey man, left you a msg on silviav8 too...interested in diff....will you take a photo with rear cover off? I also was the one who was really interested inyour car before you sold it. I got an LS1 S14 now though but would like this diff...Only thing is I have a SIKKY driveshaft for the non-abs diffs (longer)...I would have to source a short one. Lmk cheers.

[mxkilla450]

free bump for an insane deal on the trans

[CDriver]

Hey man, left you a msg on silviav8 too...interested in diff....will you take a photo with rear cover off? I also was the one who was really interested inyour car before you sold it. I got an LS1 S14 now though but would like this diff...Only thing is I have a SIKKY driveshaft for the non-abs diffs (longer)...I would have to source a short one. Lmk cheers.

I wont be able to get a picture up till Monday (out of town). I inspected it when I got it a few months back to verify that it is in fact a HLSD and it is. Also verified everything was working correctly and it is.

You can either sell your DS and get a new one or have yours shortened. We have a place around here (Lynchburg VA) that will shorten a DS for about $100.

free bump for an insane deal on the trans

I know right!! Thanks.

[jdm2191]

Good deal bump for you

[CDriver]

Diff: Sold

Trans: Sold

[turbo_dreams]

So glad to know Freed makes that trans adapter kit, glws.

[CDriver]

So glad to know Freed makes that trans adapter kit, glws.

Yeah, You should buy them $425 shipped to your door :-)

[babillaracing]

damn that a steal , if you still have the tranny by the end of february we need to talk. glws

[CDriver]

I have a deposit for it but if it falls through I will contact you.

[darkzschneider]

Are you still building the 2jz 240? if so i have a r154 i could trade for the v160 cash on top.

[CDriver]

Are you still building the 2jz 240? if so i have a r154 i could trade for the v160 cash on top.

I already have a buyer for the V160. You should buy the mounts. No I'm not building a 2JZ 240 anymore. My new business needs investment monies.

[2jzs14]

bump for a great seller, awesome to do business with!

[jdm2191]

this is still not sold?

[JDM SPUG]

THAT TRANNY CAN HANDLE A GOOD AMOUNT MORE THAT 650tq.

glws

[CDriver]

bump for a great seller, awesome to do business with!

Thanks bro, hope your project brings you much joy!!

this is still not sold?

The mounts are still for sale.

THAT TRANNY CAN HANDLE A GOOD AMOUNT MORE THAT 650tq.

glws

I was talking about the clutch.

[CDriver]

New Price on mounts: $375 shipped!!

[JDM SPUG]

Misread. Great clutch