PDA

View Full Version : VA built ka24de part out, ka-t setup part or whole, etc


carcrzy920
01-17-2012, 02:36 PM
name: Daniel Hume
location: Fredericksburg, va
contact: PM's or text at 540-834-9723

motor:
JE 9.1 +.020 pistons-$300
eagle rods-$200
king bearings
arp main studs/ head studs-$200 for both sets
felpro headgasket
stock freshened head with new valve seals
s14 232/232 cams
s14 intake manifold

sell for a whole of $1200 for the long block with intake mani (motor has 1200 miles on it) broken in properly

turbo setup:
isis rs3871 with adjustable wastegate-$250
xspower ka24det t2 bottom mount manifold-$70
stock sr turbo elbow, 3"sr titan motorsports downpipe-$100
isis intercooler kit-$300
q45 370cc injectors-$70
oil lines\bunged pan\coolant lines-$75
rom tuned ecu from deeps garage in california-$200 (tuned for n62, t25/[email protected], 370cc)
n62 (z32) mafs with pigtail-$60


will sell the whole setup for-$1000

drivetrain:
competition stage 4 clutch (4k on it if that)-$250
stock steel flywheel-$40
alluminum 1 piece drive shaft-$280
stock s14 transmission-$150 (no grinds etc)
no brand ebay short shifter-$40

http://hphotos-sea1.fbcdn.net/hphotos-snc7/377427_276519102409116_100001530850326_793859_1396 867519_n.jpg

jjps13
03-04-2012, 04:21 PM
Would you be willing to ship the turbo setup? I'm in Winston Salem so it's kinda far to drive lol. Also will the ecu work with a 92 mutual trans? I'm sure it does but I just wanted to check in case.

sasmar929
03-19-2012, 03:03 PM
you have been pm'd

z32ttvert
03-19-2012, 03:52 PM
pics of flywheel?

bunny13
03-19-2012, 08:03 PM
Pm'd

Msglngth

S13ZX
03-19-2012, 08:38 PM
is the driveshaft for s13? if so..will you ship? if so...how much?

LDDIAZ79
03-19-2012, 09:15 PM
Pic of clutch?

thedeadking
04-06-2012, 12:44 PM
Bump for legit seller/buyer.

d_nice
04-06-2012, 01:15 PM
interset in oil lines\bunged pan\coolant lines..need pic of the oil pan any dents leaks and all that good stuff...pm send

MR240FACE
04-07-2012, 12:18 AM
Still got those ARP head studs?

TheKingBLop
04-08-2012, 04:25 AM
Pm'd about the rods and pistons. Please hmu! I need these.

Frank E Bones
04-08-2012, 01:18 PM
PM'd you about the Z32 MAF.

revolvedspecv05
04-08-2012, 06:35 PM
I want the whole motor and tranny please. Pm meeeeeeeee, im in va!

nismoninjagtr
04-09-2012, 05:08 AM
Pics of the turbo?

coupe92
04-09-2012, 08:30 PM
Texted earlier, no response. Interested in turbo.