Tranman324
01-16-2012, 09:39 AM
I SAY 99.99% BECAUSE THIS SWAP REQUIRES COMMON SENSE.
This is a complete kit to have a fully functioning 6 speed transmission working on any SR S13.
FULL BOLT ON COMPLETE KIT WITH ALL WORKING SENSORS
Just got a new job and decided to liquidate my cars. Figured this kit can go to better use.This kit includes (included price I paid):
1. 2006 Nissan 350Z 6 speed CD02 transmission: ($600)
- Bought from a totaled 350z that was in a rear end collision.
- ~20,000 miles on transmission
- Neutral and Reverse switch pigtails included
- Bell housing custom machined to fit an SR: ($80)
- Custom shifter bracket and linkage modification to fit an S13: ($125)
- All new seals and clips replaced due to transmission tear-down, 9 seals total: ($56.69)
2. Custom Z33 to SR adapter plate with all required hardware included: ($420)
3. Custom Transmission crossmember: ($100)
- Modified to use stock SR transmission mount
4. Shaft masters custom Z33 to S13 driveshaft: ($363.99)
- Steel Shaft
5. Stainless steel custom S13 to Z33 clutch line: ($90)
6. BNIB centric Z33 Clutch slave cylinder: ($49.12)
7. Dakota Digital SGI-5 Universal Speedometer converter: ($95)
- This is needed to have a working speedometer
- Converts the signal from the ABS sensor to a speed signal
- Calibration needed
8. J30 ABS Viscous Diff: ($100)
- comes with a good ABS sensor (pictured next to diff)
OPTIONAL ITEMS I BOUGHT THAT CAN BE INCLUDED
1. Resurfaced Stock SR flywheel ($50)
- Resurfacing ($45)
- Didn't like the feel and noise from my Fidanza on the SR.
2. Southbend State 1 clutch ($380)
- Wanted to replace my garbage Spec clutch
- Bad ass clutch makers, I have a southbend in 2 other cars
- Rated at 360ft/lbs
Pictures from Zilvia of the swap:
SR Tranny Vs Z33 Trannyhttp://img.photobucket.com/albums/v229/sil8ty/TransComparison.jpghttp://i239.photobucket.com/albums/ff70/riashly/_MG_5376ss.jpghttp://i239.photobucket.com/albums/ff70/riashly/Picture143.jpghttp://i239.photobucket.com/albums/ff70/riashly/Picture142.jpg
PICTURES OF THE PRODUCTS!http://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1163.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1162.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1161.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1160.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1159.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1158.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1157.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1156.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1155.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1154.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1153.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1152.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1151.jpg
CLUTCH AND FLYWHEEL
http://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1144.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1145.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1146.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1147.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1148.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1149.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1150.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1136.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1137.jpg
PRICE PAID FOR COMPLETE KIT: $2079.98
PRICE FOR YOU: $1600+shipping!
PRICE FOR CLUTCH: $300+shipping!
PRICE FOR FLYWHEEL: $60+shipping!
Willing to negotiate a package if you buy it all!
This is a complete kit to have a fully functioning 6 speed transmission working on any SR S13.
FULL BOLT ON COMPLETE KIT WITH ALL WORKING SENSORS
Just got a new job and decided to liquidate my cars. Figured this kit can go to better use.This kit includes (included price I paid):
1. 2006 Nissan 350Z 6 speed CD02 transmission: ($600)
- Bought from a totaled 350z that was in a rear end collision.
- ~20,000 miles on transmission
- Neutral and Reverse switch pigtails included
- Bell housing custom machined to fit an SR: ($80)
- Custom shifter bracket and linkage modification to fit an S13: ($125)
- All new seals and clips replaced due to transmission tear-down, 9 seals total: ($56.69)
2. Custom Z33 to SR adapter plate with all required hardware included: ($420)
3. Custom Transmission crossmember: ($100)
- Modified to use stock SR transmission mount
4. Shaft masters custom Z33 to S13 driveshaft: ($363.99)
- Steel Shaft
5. Stainless steel custom S13 to Z33 clutch line: ($90)
6. BNIB centric Z33 Clutch slave cylinder: ($49.12)
7. Dakota Digital SGI-5 Universal Speedometer converter: ($95)
- This is needed to have a working speedometer
- Converts the signal from the ABS sensor to a speed signal
- Calibration needed
8. J30 ABS Viscous Diff: ($100)
- comes with a good ABS sensor (pictured next to diff)
OPTIONAL ITEMS I BOUGHT THAT CAN BE INCLUDED
1. Resurfaced Stock SR flywheel ($50)
- Resurfacing ($45)
- Didn't like the feel and noise from my Fidanza on the SR.
2. Southbend State 1 clutch ($380)
- Wanted to replace my garbage Spec clutch
- Bad ass clutch makers, I have a southbend in 2 other cars
- Rated at 360ft/lbs
Pictures from Zilvia of the swap:
SR Tranny Vs Z33 Trannyhttp://img.photobucket.com/albums/v229/sil8ty/TransComparison.jpghttp://i239.photobucket.com/albums/ff70/riashly/_MG_5376ss.jpghttp://i239.photobucket.com/albums/ff70/riashly/Picture143.jpghttp://i239.photobucket.com/albums/ff70/riashly/Picture142.jpg
PICTURES OF THE PRODUCTS!http://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1163.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1162.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1161.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1160.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1159.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1158.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1157.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1156.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1155.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1154.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1153.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1152.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1151.jpg
CLUTCH AND FLYWHEEL
http://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1144.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1145.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1146.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1147.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1148.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1149.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1150.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1136.jpghttp://i834.photobucket.com/albums/zz267/Jtultra324/IMG_1137.jpg
PRICE PAID FOR COMPLETE KIT: $2079.98
PRICE FOR YOU: $1600+shipping!
PRICE FOR CLUTCH: $300+shipping!
PRICE FOR FLYWHEEL: $60+shipping!
Willing to negotiate a package if you buy it all!