-= The Precision Turbo Owners thread =-

[TFD]

Since it is hard to find any decent information about the real performance of Precision turbo's I had the idea to start this thread as an information libary for these turbo's (same as the famous GT2871R thread...)

What info do you want?

Well, most people like to know spoolup and power so lets post your precision setup here.

- PTE turbo? (from the old sc61 or so to the new billet stuff..)
- A/R, BB etc.
- Engine (displacement)?
- full boost rpm?
- Power? @ what boost?
- Dynosheet?
- Other stuff that makes the turbo spin faster/slower?

Well, you get the picture. Please, no discussions on whats better or not... just reallife experience.

Grtz,
Daniel

[Yellow4g63]

- PTE turbo SC61 .63 exhaust housing with stage 5 wheel.

- Engine RB20

- full boost rpm 5200ish I would say

- Power? 354whp @ 15psi 398whp @ 17psi

- Dynosheet http://i137.photobucket.com/albums/q211/Bluerb240/rb20s14dynorun.jpg

[trickey1991]

Precision FTW! 3231E

251whp RB20 at 11.5PSI , looking to make 350whp at 18lbs this spring!
• 55mm inducer compressor wheel
• "E" compressor cover 3.0" inlet/2.0" outlet
• T31, 76 trim turbine wheel
• Turbine housing options:
- T3 .48 or .63 A/R with 4 bolt discharge
- T3 .48 or .63 A/R with 5 bolt discharge (with or without wastegate hole)
• 360° journal bearing system

[rbs14kouki]

My friend did 373 @ 18psi (on mustang dyno) full boost around 4500

Sr20det
Billet 5557 ar.64
264 cam
Greddy intake
Other bolt on parts

Two-Tone (A short film about the cleanest S13 out there) on Vimeo (http://vimeo.com/24288367)

And im building a ka24det for my friend i chose the same turbo for the built

[STR8E180]

think u might be interested in this thread if your interested in Precision turbos
POWERTUNE Red Dragon - Hardtuned.net (http://www.nissansilvia.com/forums/index.php?showtopic=461146)

[jimefam]

I should be dyno'ing my rb25 in a month or so I'll post up the results for my pte 7685.

[R33E8]

I should have my 6766 on the dyno soon. It's currently a ceramic ball bearing T3 .82 AR with 3" vband outlet and going onto a KA-T.. I think I might change to a .68 exhaust housing.. I planning on running 25-30psi on 93 with meth injection.. Daily driven.. Here it is next to my 35r in my dirty ass engine bay (not for long :) )

http://i.imgur.com/D0vjol.jpg

You might want people to specify their fuel type too..

I'll add my dynosheet to this post..

[TFD]

This going well guys, thanx.

@ Dtr8180: great link. I'll copy the results for a quick reference:

Stock S14 SR20DET
264 BC cams
Precision 5557S journal bearing
Precision 3" V-band kit
Tial MVS Watercooled 38mm wastegate
Powertune high mount exhaust manifold

297 wKw @ 20 psi (403 whp) E85
379 wKw @ 30 ([email protected] 30) psi (515 whp) E85
392 wKw @ 33 psi (533 whp) E85 (ARP Headstuds, BC S & R added)

20psi with full boost @ 4100rpm


http://i53.tinypic.com/rlexjs.jpg

[STR8E180]

^ that car has now upgraded to a 6262 .63 exhaust housing

Now packing a 2.2L Brian Crower stroker kit (http://powertune.com.au/page91.html)and Precision 6262SP (http://powertune.com.au/6262.html) turbo, it has been tuned to a thumping 427kW at the wheels at 35psi on E85 before the 1450cc injectors were at 99% duty cycle.

http://powertuneaustralia.files.wordpress.com/2011/02/2011-01-25-pta-s14-6262-35psi.jpg

[STR8E180]

my sr20vet is running a 6262 as well

http://img.photobucket.com/albums/v482/str8e180/IMG_1750.jpg

[STR8E180]

another one of powertune ausrtalia's cars

6265 twin scroll
powertune twin scroll manifold
twin Tial MVS 38mm gates

Stevos S15 Precision 6265 AKA wild Banana - YouTube (http://www.youtube.com/watch?v=D12DD6pHCQs&feature=player_embedded)

[Z350MAN]

Built Bottom s13 blacktop SR20DET
supertech valve train 264 HKS S2 cams
Precision 5557S journal bearing billet wheel
Precision 3" V-band kit
Custom fab'd exhaust manifold

@ 20 psi 412whp 93
should be finished up with my Methanol injection kit tomorrow will be tuning for 26ish psi on 93 #'s soon

20psi with full boost @ 4200rpm

[AdrenalineS14]

anybody running a 2871 or 3071 equilvalent? say the billet 5130??? i wanna know what people are pushing with that turbo?

[Flicktitty]

Just bumping this back up, Anyone on here running a 5858 on a KA?

[waxball88]

Currently looking to get my 6152 rebuilt. KA-T
Will be keeping an eye on this thread!

[beems240sx]

Precision 5558 with a .63 ar vband. i wanted response

http://i129.photobucket.com/albums/p204/beemsmx6/527583_10151840054055282_797858653_n.jpg

http://i129.photobucket.com/albums/p204/beemsmx6/403397_10151842849115282_563762080_n.jpg

http://i129.photobucket.com/albums/p204/beemsmx6/IMAG1029.jpg

http://i129.photobucket.com/albums/p204/beemsmx6/482060_10151856200955282_977877642_n.jpg

[Trinidrift3]

anyone have a suggested turbo for a redtop sr20det with:
3in catback
greddy fmic
apexi power fc
z32 maf
walbro 255
blitz dd
manual boost controller

the turbo seals on my stock t25 are going so i am looking to upgrade but im not looking to pay a garret as i do not have that amount of money. precision seems to be a good option

looking for mid range to top end power (3500-7500 rpms)
also will most likely add tomei 254 poncams soon
thanks

[jamg]

anyone have a suggested turbo for a redtop sr20det with:
3in catback
greddy fmic
apexi power fc
z32 maf
walbro 255
blitz dd
manual boost controller

the turbo seals on my stock t25 are going so i am looking to upgrade but im not looking to pay a garret as i do not have that amount of money. precision seems to be a good option

looking for mid range to top end power (3500-7500 rpms)
also will most likely add tomei 254 poncams soon
thanks

bumping this

[STR8E180]

SR22DET
BC 272 intake and exhaust cams
precision 6262 with .63 exhaust housing
powertune exhaust manifold
tial mvs external gate
4inch exhaust system
2000cc injectors
powertune twin intank pump kit

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash3/547941_397317443657873_316798936_n.jpg

[sqd]

Not my car, but I have the exact same setup to be assembled this winter. I even have his exact head he used on this car.

E85
Precision SC5857 .63 a/r
Forged bottom end
Headwork (ported/polished, cnc'd etc)
Tomei Procam 260s
1680cc injectors
Custom intake & exhaust manifold
Twin in-tank 340lph pumps
Haltech PS1000
Audi 115R coils

http://i.imgur.com/v0V7a.png

So I'm expecting to land somewhere around there too :)

[[email protected]]

- PTE turbo? 6266
- A/R, BB etc. .63 ar BB
- Engine (displacement)? 2.0L .20 oversized stock sleeves stock head only cams
- full boost rpm? idk too busy driving lol
- Power? @ what boost? 398whp 360ft lbs @ 22psi off the trailer, 595whp 424ft lbs @33psi spike 30psi at redline
- Dynosheet?

http://i22.photobucket.com/albums/b342/snoflake95/Snapbucket/E225B0BC.jpg

[Mike Mic]

so I just picked up a 6262 for my sr20 can anybody tell me when it will start getting into boost? I'm thinking about trading it for a gt3076r. any info will help. I've searched and I cant really find anyone running a 6262 on a sr. most people have the ve head or a 2.2. I have forged block with stage 1 custom cams I had made, compression is 9:1 je pistons with eagle rods. I have a high mount set up. im only going to be running about 18psi any idea of when I will hit full boost?

[ForeignMuscle]

I'm going 5858. Forged block. 272's.

Anyone making over 400whp on pump with this turbo?

[rbs14kouki]

I just bought a s14 , pt 4828 on a sr20det , Never drove it yet cause the bottom end is knocking !

Does anyone know how much a set-up like that do ? I think i should be around 350whp

[ForeignMuscle]

Bump it up. I'm about to have my setup ready. Looking for 475hp at around 20psi on 93.

I know there has to be more Precision users out there. Post it up!

[boost addict]

Looking at everyone torque numbers in here it seems theyre kinda low to me in relation to the whp. Ive got a 5558(t3, .62ar, 38mm wg) on my sr and made 420/280 at 17psi and my last setup was a 3071r(t2, .82ar, interally gated) and made 430/365 at 22psi. Any one know whats up with such the big drop?

[EnemyS15]

I have this precision turbo I am trying to sell.. I don't have the serial number or plate for it.

It's .60 cold
.63
T3
5 bolt exhaust housing
external wastegate
Oil cooled only
http://imageshack.us/a/img201/2909/imag1102.jpg

i know it's a long shot, but any help is appreciated

[ForeignMuscle]

Take the housings off and measure the inducer and exducer of each wheel with calipers. Problem solved.

[EnemyS15]

Take the housings off and measure the inducer and exducer of each wheel with calipers. Problem solved.

Assuming your reply is directed to my post, could you elaborate a bit more on this?! I would like to learn as I proceed with your suggestion, but your reply is vague atm.

[ForeignMuscle]

Using Vernier calipers, measure the small side and large side of both turbo wheels. You should be able to do a Google search to find your model using the measurements.

[[email protected]]

Looking at everyone torque numbers in here it seems theyre kinda low to me in relation to the whp. Ive got a 5558(t3, .62ar, 38mm wg) on my sr and made 420/280 at 17psi and my last setup was a 3071r(t2, .82ar, interally gated) and made 430/365 at 22psi. Any one know whats up with such the big drop?

Your torque is a relation to your hp. The SR isn't a torque monster but it makes more torque then other dohc motors. Also depending on the turbo and response and tune tq #'s will lay out differently
The actual # don't mean anything its the powerband and keeping the torque as flat as possible minimizing drop

[beems240sx]

5558 .63 ar
9.0:1 compression built motor
264 cams
93 octane
19psi
470whp/430ftlbs

Ill get the dyno sheet soon

[Seraphim38]

470 on 93 is a VERY good number, especially out of a 5558 .63.

[Chris28]

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/295613_10151555391944935_934957068_n.jpg

KA, built bottom end, 9:1 pistons, stock cams. Precision 5431 with the .48ar exhaust housing, 16psi.

[rbs14kouki]

My buddy is making 388whp and 400lbs on is ka24det with a 5557 jb ar.63

Built bottom end with stock head ! Doc racing mani and 5557 jb !

http://i202.photobucket.com/albums/aa74/rbs14kouki/random%20cars/image-26.jpg (http://s202.photobucket.com/user/rbs14kouki/media/random%20cars/image-26.jpg.html)

http://i202.photobucket.com/albums/aa74/rbs14kouki/random%20cars/image-27.jpg (http://s202.photobucket.com/user/rbs14kouki/media/random%20cars/image-27.jpg.html)

[Ka-t in progress]

I'll be posting up this weekend. Testing out my .64 5128 tomorrow,s4 cams,And a few more goodies. Will chime in soon

[sqd]

Got my car tuned and dyno'd yesterday.

Precision 5857 billet, 0.63 a/r, journal
Forged SR20, 2L (stock bore)
Tomei 260 Procams
E85, ID2000's
590.5 whp on a Dynapack, 33.5 PSI
480 ft lbs/648 wNm

http://i.imgur.com/rSVv4qX.jpg

[rbs14kouki]

I just bought a s14 , pt 4828 on a sr20det , Never drove it yet cause the bottom end is knocking !

Does anyone know how much a set-up like that do ? I think i should be around 350whp

I finaly finished that engine !!! Its now in my brothers car

S14 sr

Bottom end:

Supertech 86.5mm piston (we changed them because 2 of the stoxk broke ringlands)
Stock rod (my bro didnt had enough money for upgrade rods)
Stock crank
New bearing all around


Head:

Bc valves springs
Dual guide mod
Stock for the rest


Hot side:

Precision 4828
Stock exhaust mani
3inch downpipe and hks hipower exhaust


Fuel:

Aeromotive in tank fuel pump
Aeromotive fpr
740cc injectors
91oct pump fuel


304whp and 299trq @16psi

[ersus]

Hi this is my setup

- PTE6266 Billet
- AR.82 Journal
- 2000cc
- Build SR20VET, wiseco 9.1:1 pistons, eagle rods, ACL race calico coat bearings, mazworx head bolts, arp main bolts, apexi head gasket, 1200cc five-0, megasquir 3 EMS, Stock crank,custom turbo manifold, 4" down pipe cat back, stock sr20ve cams, etc.
I'm planing run with 30 psi on 93oct with water meth injection 50/50.

how many horsepower can I expect?

[Yellow4g63]

https://www.youtube.com/watch?v=c3Zn9tdispg
That guy did 605whp at 2bar with the 6262 with stock cams. maybe 660?

[Wiesner12]

2JZ-GTE S14 Zenki

Precision 67/66 CEA DBB
0.84 divided exhaust housing
T4 flange
Boost Logic exhaust manifold
Tial MR 44 mm wastegate
4" downpipe and exhaust
Kelford cams 202 B Cam 260 duration 9.35 lift
Tuned on AEM V1 by OCD Works

21.5 psi with 93 octane and a splash of c16 to be safe
700rwhp/628rwtq

23psi with c16
767rwhp @ 6850rpm / 668rwtq @ 5450rpm

Buttoning up a few things and going to 27psi. ..

[D-Clem]

Haven’t seen any other precision threads and thought it may be ok to bump this old thread to see if any more guys out there want to provide input? Debating on a 5558 or 5858 setup at the moment myself

[anti tyler]

I had a 5431 once, bolted onto my insane KA.

Made 375HP on 7lbs of boost. I wish I would have gotten to swap all of my hardware to a straight chassis.