Wheel Clearance On S14 front coilover - 17x9" +20

[drifter92]

I searched google for a little bit and couldn't find any definitive pictures of a 17X9" +20 on the front of an s14 dumped on coilovers to show the clearance between the wheels/tire and the adjusting collars and spring.

17x9" +20 NO SPACERS
225/45/17
WedSport SA-70
STANCE GR+ Coilovers
http://i94.photobucket.com/albums/l99/Deanith/3f96008f.jpg
http://i94.photobucket.com/albums/l99/Deanith/147e8a89.jpg

[fliprayzin240sx]

Should fit with no need for spacers...

[G240]

I run 18x9.5 +22 in the front of mine with no problems. I have Stance GR +Pros.

[drifter92]

Yes I'm saying they fit and clear for sure, so when people search on google they have pictures

[fliprayzin240sx]

You could have just posted it up in the Wheel Fitment thread to accomplish the same thing...

[drifter92]

Oh okay, you mean the "wheel fitment whore thread"?

[G240]

No the Wheel Fitment Questions thread.

[Brentbohn]

get ready to splice your fender harness on drivers side or relocate it.... Ive had to do this a few times.

[drifter92]

mine is out of the way, i used to run 18"s and i learned the hard way, lol

[slipnslide88]

your fine i ran 17x9 +15s on one i had with no issue i was trying to find pics of my old car for you but no luck

[drifter92]

+15 has more clearance than +20 dude...

[job4ac0wboy]

Im running 17x9 +17 215/40 tire and 1.5 degrees camber. No pull just rolled fender. You can probably safely run factory camber specs on a +20 offset. Depends on the tire you run also. Go to RIMTUCK.com - Wheel Fitment Database (http://www.rimtuck.com)
And +20 has more clearance than +15 if im not mistaken. +20 is 20mm inward from directly over the hub (at 0 offset). So +15 offset is closer to directly over the hub than +20.

[drifter92]

Im running 17x9 +17 215/40 tire and 1.5 degrees camber. No pull just rolled fender. You can probably safely run factory camber specs on a +20 offset. Depends on the tire you run also. Go to RIMTUCK.com - Wheel Fitment Database (http://www.rimtuck.com)
And +20 has more clearance than +15 if im not mistaken. +20 is 20mm inward from directly over the hub (at 0 offset). So +15 offset is closer to directly over the hub than +20.


you are mistaken.

Im talking about clearance to the coilover guys, read the title.

Higher offset hits the coilover
lower offset hits the fender or sticks out

I posted this thread to say "Yes a 17x9" +20 fits on the front of an S14 on Stance coilovers with no spacers needed to clear the coilover

[chuy]

17x9.5 +15 5mm spacer for the front
rolled and pulled to tuck tire.

I had the rim rub against the coilover thats why I went with a spacer.