PDA

View Full Version : Question for people with TEIN tie rods


Prelude Guy
01-15-2012, 07:58 AM
Hi guys,

I have a question. Are there any additional parts that come with these that aren't shown in this pic?
Tein Inner & Outer Tie Rods Combo S13 S14 S15 240SX SILVIA (http://www.frsport.com/Tein-Inner---Outer-Tie-Rods-Combo-S13-S14-S15-240SX-SILVIA_p_8172.html)

I was wondering which parts are used to increase the steering angle. If all the parts included are shown in the pics, are the washers the only parts used to increase steering angle?

Thanks!

Sileighty_85
01-15-2012, 08:44 AM
if you look at the 2nd pic you will see 2 thick washers, Those are what increase steering angle

silly240
01-15-2012, 09:11 AM
Thats everything, just be prepared to rub if you add the washers on a low offset wheel

Prelude Guy
01-15-2012, 04:13 PM
Ah, I see. Thanks guys!

I was expecting some metal/aluminum plates or something. Had no idea it was just washers.

Thanks again! :)

sidewaysil80
01-15-2012, 04:35 PM
best bet is to buy the parts shop max spacers. only ten bucks but they're 7mm vice the 6mm tein ones. MAKE SURE YOU USE LOCTITE, the factory lock plates will no longer work and it's imperative you use locktite (i use blue, red is overkill).