240obsessed
01-13-2012, 08:32 AM
Alright, well I've had my 1999 Acura Integra LS Sedan for a little over 2 years now. She's been great to me but I feel like moving on to something else. I've always loved 240's so I'm up for any sort of trade. Must be 5spd though.
Just to throw the cons out in the beginning;
-Rattlecanned passenger fender and small part of front bumper
-Rust forming on driver side rear quarter, not bad
-Installed a wingless trunk that needs paint, however I am including the correct trunk w/ ITR wing
Now on to the modlist.
1999 Acura Integra LS Sedan; 5spd.
101k original miles.
Engine:
-Password:JDM carbon intake
-Weapon R 4-1 Street Header
-Invidia test pipe
-Buddy Club Pro Spec catback exhaust
-Gunmetal painted valve cover
-Spoon reservoir covers
-Buddy Club oil filler cap
-Buddy Club rad cap
Exterior:
-JDM OEM 98+ rear tail lights (pics do not show this, just put em on yesterday)
-OEM headlights with black shrouds and yellow painted high beam reflectors (just started to fog on passengers side sadly)
-Type R replica rear wing (took this trunk off and put a wingless one on for now, just needs paint)
-12000k HIDs w/ relay harness
-Gunmetal painted Honda emblems (probably taking these off soon actually)
-OEM mud flaps (removed but I have them)
-OEM style yellow fogs
-Rear valances (oem style)
-ViS carbon fiber spoon style front lip (cracked but zipped back together, its off for winter)
Suspension:
-Beaks candy red rear lower tie bar
-Eibach Ground Control coilover sleeves
-KYB AGX shocks
-Buddy Club rear camber kit
-16x7.5 +32 Kosei K1 w/ Kuhmo Ecsta AST (205/45/16)
Interior:
-JDM ITR SRS steering wheel
-Buddy Club Type A shift knob
-Corbeau FX1 bucket for drivers seat
-Sony head unit
-OEM TSX floor mats
-Wink mirror
Also, I have almost every stock part that was ever taken off to be included.
Here's some recent pics, I'll be getting some interior, engine bay, and some newer exterior up soon. Keep in mind I just put her in winter mode so no lip and its not all that low haha.
First one shows you the rattlecanned fender. I also just painted these wheels gold today.
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/382682_10150495815281108_567651107_8594049_1081439 923_n.jpg
Trunk that needs paint, I still have the trunk with the wing also:
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/404909_10150478922206108_567651107_8509671_1215409 396_n.jpg
These two have the wing:
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/384079_10150368219621108_567651107_8100990_1048228 513_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/387723_10150368239671108_567651107_8101085_1421311 312_n.jpg
This ones old, but still good!
http://i958.photobucket.com/albums/ae63/lsIntegraDB7/Teggy6.jpg
Just to throw the cons out in the beginning;
-Rattlecanned passenger fender and small part of front bumper
-Rust forming on driver side rear quarter, not bad
-Installed a wingless trunk that needs paint, however I am including the correct trunk w/ ITR wing
Now on to the modlist.
1999 Acura Integra LS Sedan; 5spd.
101k original miles.
Engine:
-Password:JDM carbon intake
-Weapon R 4-1 Street Header
-Invidia test pipe
-Buddy Club Pro Spec catback exhaust
-Gunmetal painted valve cover
-Spoon reservoir covers
-Buddy Club oil filler cap
-Buddy Club rad cap
Exterior:
-JDM OEM 98+ rear tail lights (pics do not show this, just put em on yesterday)
-OEM headlights with black shrouds and yellow painted high beam reflectors (just started to fog on passengers side sadly)
-Type R replica rear wing (took this trunk off and put a wingless one on for now, just needs paint)
-12000k HIDs w/ relay harness
-Gunmetal painted Honda emblems (probably taking these off soon actually)
-OEM mud flaps (removed but I have them)
-OEM style yellow fogs
-Rear valances (oem style)
-ViS carbon fiber spoon style front lip (cracked but zipped back together, its off for winter)
Suspension:
-Beaks candy red rear lower tie bar
-Eibach Ground Control coilover sleeves
-KYB AGX shocks
-Buddy Club rear camber kit
-16x7.5 +32 Kosei K1 w/ Kuhmo Ecsta AST (205/45/16)
Interior:
-JDM ITR SRS steering wheel
-Buddy Club Type A shift knob
-Corbeau FX1 bucket for drivers seat
-Sony head unit
-OEM TSX floor mats
-Wink mirror
Also, I have almost every stock part that was ever taken off to be included.
Here's some recent pics, I'll be getting some interior, engine bay, and some newer exterior up soon. Keep in mind I just put her in winter mode so no lip and its not all that low haha.
First one shows you the rattlecanned fender. I also just painted these wheels gold today.
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/382682_10150495815281108_567651107_8594049_1081439 923_n.jpg
Trunk that needs paint, I still have the trunk with the wing also:
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/404909_10150478922206108_567651107_8509671_1215409 396_n.jpg
These two have the wing:
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/384079_10150368219621108_567651107_8100990_1048228 513_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/387723_10150368239671108_567651107_8101085_1421311 312_n.jpg
This ones old, but still good!
http://i958.photobucket.com/albums/ae63/lsIntegraDB7/Teggy6.jpg