A/C Air Conditioning kits for SR20 swaps! Adapt any KA compressor setup to an SR20!

[codyace]

AC Air Conditioning Conversion kits for SR20 Owners! Adapt any KA compressor setup to any SR20!

http://www.sr20acbrackets.com http://www.sr20acbrackets.com http://www.sr20acbrackets.com

Arguably one of the biggest issues/pet peeves with the SR20 swap in USDM S chassis cars it the lack of working AC in them. This has always been an issue due to line differences , compressors being seized, and lack of AC shops to make an affordable solution.

A few years back I solved this issue by making conversion brackets that allow owners to bolt their DOHC KA compressors to any type of SR20 engine. Now, 4 variants later, I’m on version 4.0 of my kits, finally offering clearance for ALL oil pans (Greddy/Moroso/Tomei/Circuit Sports) and all sway bar combinations that I could get my hands on for both chassis.

How does it work
As stated above, the kits allow any KA compressor to be bolted to any SR20 type; they are completely interchangeable so long as you know the compressor type, and SR bracket type. Essentially, you could use an S13KA compressor in an S14 car, and you can use a redtop bracket kit on a blacktop engine…no more worries about getting the right stuff, as it all works! Pulley and belt line up works the same regardless.

Kit Contents: Literally Everything!
All of the needed hardware to secure the adapter brackets to the SR bracket, and new hardware to secure the compressor to my adapters brackets. My kits also come with the correct belt for the application (so long as using OEM crank pulley, if using aftermarket you can purchase kits without belt, please Contact Us)

New Features
The new version 4.0 brackets offer a new thinner profile, thanks to utilizing flat head allen bolts to secure the adapters to the SR bracket. The Flat head allen bolts also allowed the compressor to be moved up nearly ¾ of an inch finally giving clearance to the Moroso pan owners.
Lastly, the Flat head allen bolts self-center the brackets, meaning no misalignment issues!

http://www.sr20acbrackets.com/images/webacbrackets2.jpg

http://www.sr20acbrackets.com/images/webinstalled.jpg

http://www.sr20acbrackets.com/images/webacbrackets1.jpg



http://www.sr20acbrackets.com http://www.sr20acbrackets.com http://www.sr20acbrackets.com

To Determine What Kit you have:
http://www.sr20acbrackets.com/images/webcompressorlarge_001.jpg

Pricing:
S13 KA compressor to SR20 Redtop or S15 SR20: 70 shipped
S13 KA compressor to S13/S14 SR20 Blacktop: 110 shipped
S14 KA compressor to SR20 Redtop or S15 SR20: 110 shipped
S14 KA compressor to S13/S14 SR20 Blacktop: 110 shipped

Purchasing
For purchasing information, please check out my website at CodyAce SR20 Air Conditioning Bracket (http://www.sr20acbrackets.com) or PM me

Contact me for any other information or questions you may have:
If you have any other questions feel free to email me at any time (codyace AT gmail DOT com) or PM me.

http://www.sr20acbrackets.com http://www.sr20acbrackets.com http://www.sr20acbrackets.com

[snafupossum]

This is a must do step when your doing a sr swap on your car. If your installing with your compressor in the bay, put the top bolt in the compressor before you put the motor in. Makes everything a bajillion times easier!

[codyace]

This is a must do step when your doing a sr swap on your car. If your installing with your compressor in the bay, put the top bolt in the compressor before you put the motor in. Makes everything a bajillion times easier!

It also helps keep GF's happy when they ride with you :D I always laugh at how many guys PM me back saying how much happier their gf/wife is after getting AC back in the car.

[tinys s14]

you should work on a kit for ka with rb motor that would be sweet

[ghetto180]

i have a s14 sr in a s14 chassis which bracket kit will i need as well and which sr20det ac bracket? thanks

[GhostlyCoupe]

Just sent payment for a S13 -> S13 Redtop. Looks great excited to have a fully seated AC compressor!

[Souljahzs13]

This looks like a really clean setup

[brndck]

Sent payment this afternoon. Looking forward to getting it in the mail. (then I'll be all out of excuses to start my engine swap)

[jdm2191]

do you sell R12 as well lol

[Vayber]

Bump legit seller and quick and painless install

[codyace]

I didn't realize the post office would be closed for Martin Luther King Jr. Day, so all kits will now be going out tomorrow!

[codyace]

you should work on a kit for ka with rb motor that would be sweet

The thing that would concern me on the RB is how much further the engine sits forward in the engine bay, and the lines not 'reaching' sort to speak.

i have a s14 sr in a s14 chassis which bracket kit will i need as well and which sr20det ac bracket? thanks

You'll need to compare on the chart listed above. See what compressor you have (the top two side by side images) and then see what bracket you have (the bottom two images) and then follow my website link to make purchase.

If you do not have an SR20 AC Tensioner bracket, you can use anyone, from any year (as they all bolt to the block in the same fashion)...but you'll need to confirm which bracket you have with my picture to make sure you get the correct kit :D

With that all said I'd assume you will need teh S14 to S14 Blacktop kit, but you know what they say about assuming :D

This looks like a really clean setup

Thanks brother!

do you sell R12 as well lol

Haha, Not anymore. Too expensive. It's proven to work really well converting systems over to R134a, so that's always an option as well.

[snafupossum]

Here are some installed pics!

Only modification needed was to shave off 2 tabs at the bottom of the factory bracket in this pic
http://i36.photobucket.com/albums/e30/snafupossum/IMG_20120116_135526.jpg
On the car
http://i36.photobucket.com/albums/e30/snafupossum/IMG_20120116_135550.jpg
http://i36.photobucket.com/albums/e30/snafupossum/IMG_20120116_135608.jpg
http://i36.photobucket.com/albums/e30/snafupossum/IMG_20120116_135625.jpg

[Duke89]

This is rly awesome to bad I went rb20

[jontron5000]

you wouldn't happen to have AC lines for sale as well would you?

:):):):)

[codyace]

I actually don't...but there are quite a few s13 part out sin the classifieds, may be worth a shot? Hard to say if they still have them though

[Finchie]

This may be a stupid question, but searching around didn't answer it fully.

If my car was originally SOHC but now SR, I can't retain the old lines or condenser? I have to pretty much swap out the whole setup for a DOHC one? Then get your bracket?

Thanks

[codyace]

I've personally never done the SOHC to DOHC part swap, but have had many who have with success. With that said, you are going to need a DOHC compressor, and the lines that go from the firewall to the compressor, and the compressor to the condenser at a minimum. Aside from that, I've had some customers say it worked, and had other say they also needed to change to a DOHC condenser.

[brndck]

Edit: what happened is my s13 came with an s14 style compressor, so I had ordered the wrong kit. Upon comparing your photo with my compressor it's clear to see the difference.
Thanks for the quick reply via email and the excellent support!!!

[codyace]

Your correct kit will be headed out today Tyler! Thanks for being patient with this all and working with me to get it sorted out! It's certainly a confusing thing, as some later model s13 did come with the square pattern compressors.


Kits are still in stock guys, and can ship same day or next day!

[gostrider]

I need s14 ac comp to s15 motor do you have any in stock?

[brndck]

Quick update. I did rec

[brndck]

Quick update. I did receive the new kit and it bolted up perfectly. Hardware was real nice and the quality is excellent. Thanks a ton man!!!

[ghetto180]

i have a s14 bolt up kit for a sr20det s14 swap and it says U for upper L for lower? well when i put the long bolts through the compressor to ur new bracket, it clears but the fits barely, im not sure what version i have but the bolts are too short, the brackets are not like the new version, mine has two cylinder ish things welded to the plate, do you have any specific pictures of this old version hooked up, im pretty sure i have the right kit, my sr bracket is is in the shape of a square not the uneven square version, any help will b appreciated, thanks.

[DoubleURX]

I am intersted in an S13 KA compressor to S13 sr20 blacktop. Do you have any in stock, and if you do, how do i go about ordering?

[Winkkle]

So do these kits come with the compressor?

[gostrider]

did you ship out the brackets last friday ?

[gostrider]

So do these kits come with the compressor?

yeah they also come with lines and freeon :bowrofl:

[DoubleURX]

Just received my order! Thanks again for the great service & fast shipping!

[240Cali]

wow... this makes me wanna buy an AC compressor right away!!! my gf hates my fkn car because of it lol ..im at NOOB at Ac stuff.. all i'd really need is to buy an s13 compressor? and the belt? i have a blacktop s13 Sr20..

[Mister.E]

WOW, this is much nicer than the older version. will definitely be picking up one of these kits when it's time for me to do the swap.

[redline racer510]

anything for rbs or any plans in the future for rb

[Wezz]

just got one from cody...great product and amazing service.
now i have AC!!!

Paul

[Drifter_85]

are there kits still avaible? Im about to do the swap in my car and dont want to lose ac. not even for one day haha

[MICHAEL TRESNO]

Dear sir. We inform you that now we have alternative to change the compresor type Calsonic as an org sr20de s13 engine with typical from zexel product can you suggest us for the right typical for zexel product for code numnber from zexel which is appropriate with my old compresor come from calsonic type for the right hand drive . Thanks for your information but now I m living in -ndonesia thanks and best regards Michael Tresno also member for Datsun 510 in USA with FTA NO 1951 now already change with good engine s13 engine sr20de right hand drive in addition to zexel product can you suggest for org compressor s13 right drive sr20de thnaks for your support and we are welcome if all the community for sr20de engine will come to bali island for the next future best regards Michael Tresno

[Frank_Jaeger]

Just got one of these kits for a friend. codyace, you rock, man!

[Dudegonefresh]

still have any for sale. i have a s14 with a s13 redtop swap

[jerryscherry]

ordered a bracket about an 1-2 hours ago, got a email now saying its shipped. NICE :)

[s14j]

So i finally bought my brackets because here in Los Angeles its been getting quite hot.

it took me like 30 min to install. the quality of the bracket is just amazing its so spot on and everything fits so easily.
i even bought another set for my other sr as well!

thanks so much Cody! im finally not roasting in my car anymore! :kiss:

[cnazzaro240]

ordered these brackets a few weeks ago and at first i was having trouble getting them to bolt up, i sent some pictures to cody ace and it turned out the ebay seller who advertised "redtop sr20 a/c bracket" was actually a ka bracket... but i would have never figured this out myself. cody ace responded to my emails fast every time, sometimes in minutes and helped me get going in the right direction. i ended up getting the proper engine bracket and everything went smooth after that it bolted on with ease using codys brackets. great product and great customer service. cant wait to enjoy my A/C!

[dcobian]

do you still sell these?

[mattsil80wis]

just ordered a few kits for my local north jersey guys, all kits came quick and packaged well. thanks again man!

[Ricardo_200sx]

PM sent ;)

[YOSHIKOUKI]

Are these still up for sale

[nachos14]

I Can use a set too.

[mattsil80wis]

Just went and picked up a bracket setup from Cody. His inventory is fully stocked and he is ready to ship again! The amount of kits he has is astonishing