blakeZX
01-03-2012, 10:32 PM
Hey guys-
Just wrapped up a turbo upgrade and have a lot of leftover OEM RB25 stuff that I took off. Obviously, everything for sale is known good and in excellent condition unless otherwise noted. Here's what I have:
RB25DET Stock Turbo - SOLD!
In immaculate condition, removed from a running motor that had less than 30K on it, never saw more than stock boost. The pictures really speak for themselves, this thing is CLEAN.
http://i41.tinypic.com/5njce0.jpg
http://i39.tinypic.com/30mwo43.jpg
http://i41.tinypic.com/33ogm82.jpg
RB25DET -6AN Coolant Feed & Return Banjo Fittings for OEM turbo - SOLD!
Brand new, never used. Use these to run -6AN stainless braided coolant feed and return lines on your OEM turbo. Includes copper washers, and I have extra ones as well if you need them.
http://i42.tinypic.com/358rjhh.jpg
RB25DET Series II ECU - SOLD!
Marked with "G8" and P/N 23710-13U01. From a 5 speed R33 GTS-T.
http://i39.tinypic.com/1182cm8.jpg
http://i39.tinypic.com/11i0mk9.jpg
RB25DET Series II E60 MAF - SOLD!
http://i42.tinypic.com/2u9j2fk.jpg
http://i42.tinypic.com/11ta3bq.jpg
RB25DET Turbo Inlet Pipe with recirculation and breather lines - SOLD!
http://i42.tinypic.com/332zbxi.jpg
RB25DET OEM Crossover Pipe - $25
Includes OEM coupler that attaches it to the throttle body
http://i41.tinypic.com/2s8fmtg.jpg
http://i42.tinypic.com/29m1t8i.jpg
RB25DET OEM Turbo Recirculation Valve - $25
http://i40.tinypic.com/xgmdjq.jpg
RB25DET OEM Fuel Rail with 370cc Injectors - SOLD!
http://i42.tinypic.com/s4tes9.jpg
RB25DET OEM Fuel Pressure Regulator - $25 each
Have two, both in excellent working order.
http://i44.tinypic.com/nrqpt.jpg
RB25DET Series II OEM Injector Connectors - SOLD!
Someone might be looking for these, I dunno. Swapped them out for Denso plugs when I upgraded to bigger injectors.
http://i39.tinypic.com/vqsd2u.jpg
RB25DET OEM Oil Cooler / Filter Block - SOLD!
Great condition, removed to install an aftermarket cooler.
http://i42.tinypic.com/wanli1.jpg
http://i43.tinypic.com/2mpd93a.jpg
1/8" BSPT to 1/8" NPT Oil Pressure Sensor Adapter - $12 shipped (via regular mail)
You need this to run your factory 1/8" BSPT oil pressure sensor in any standard 1/8" NPT aftermarket oil filter relocation or oil cooler block adapter. Useful if you want your 'idiot light' to remain functional as a backup to your aftermarket pressure gauge, or if you are not running an aftermarket gauge at all. This was hard to find.
http://i42.tinypic.com/wciwxu.jpg
RB25DET OEM Exhaust Cam Gear - $25
http://i42.tinypic.com/i2simb.jpg
RB25DET/RB20DET OEM Flywheel Bolts x6 - $20
Excellent condition, I upgraded to an R32 RB26DETT flywheel which uses a different length bolt.
http://i40.tinypic.com/35c516w.jpg
RB25DET Cometic Intake Collector Gasket - $15
Brand new never used. Made out of 0.60" thick Cometic "AFM" material, recommended when running more than stock boost. For OEM crossover style manifold.
http://i44.tinypic.com/16c1lkj.jpg
RB25DET/RB20DET OEM turbo compressor elbow gasket 3-bolt (new) - SOLD!
RB25DET/RB20DET OEM turbo outlet gasket 6-bolt (new) - SOLD!
RB25DET/RB20DET OEM turbo outlet gasket 6-bolt (used 200 mi) - SOLD!
Took off the used outlet gasket after using it only a couple hundred miles, because I installed a new V-band turbo. Only has slight discoloration, it is the one pictured on the right. Don't have a picture of the new one, it is still in the packaging though. FRSport wants $30+tax and shipping for a new one! :|
http://i42.tinypic.com/htvair.jpg
RB25DET OEM turbo lock washers - SOLD!
Brand new still in the packaging.
http://i43.tinypic.com/10pq8lu.jpg
RB25DET OEM misc turbo oil/coolant line stuff - $5 for any piece
Just some random turbo lines/stuff that I have left over. There is an oil feed hardline, a coolant feed hardline, half of the coolant return line (turbo side banjo fitting is cut off, rear section is there) and a used oil drain hose with clamps. Make me an offer for all of it? I switched to stainless braided lines.
http://i41.tinypic.com/2ziovg8.jpg
RB25DET/VG30DE(TT) OEM Thermostat - $10
Works great, removed to install colder Nismo unit. Includes free Permatex thermostat housing gasket maker.
http://i55.tinypic.com/281d06t.jpg
I am willing to ship any of this stuff, if you need a shipping quote I should be able to get you one within a couple days. I have a scale here and I just get quotes directly from the courier's website. I ship FedEx or USPS with tracking number provided the same day I ship. I ship everything from San Diego, 92101. Local pickup available.
I accept PayPal on the condition that you add the usual 3% of the total cost to cover fees.
Please post here or PM me with any questions. Thanks for looking!
Just wrapped up a turbo upgrade and have a lot of leftover OEM RB25 stuff that I took off. Obviously, everything for sale is known good and in excellent condition unless otherwise noted. Here's what I have:
RB25DET Stock Turbo - SOLD!
In immaculate condition, removed from a running motor that had less than 30K on it, never saw more than stock boost. The pictures really speak for themselves, this thing is CLEAN.
http://i41.tinypic.com/5njce0.jpg
http://i39.tinypic.com/30mwo43.jpg
http://i41.tinypic.com/33ogm82.jpg
RB25DET -6AN Coolant Feed & Return Banjo Fittings for OEM turbo - SOLD!
Brand new, never used. Use these to run -6AN stainless braided coolant feed and return lines on your OEM turbo. Includes copper washers, and I have extra ones as well if you need them.
http://i42.tinypic.com/358rjhh.jpg
RB25DET Series II ECU - SOLD!
Marked with "G8" and P/N 23710-13U01. From a 5 speed R33 GTS-T.
http://i39.tinypic.com/1182cm8.jpg
http://i39.tinypic.com/11i0mk9.jpg
RB25DET Series II E60 MAF - SOLD!
http://i42.tinypic.com/2u9j2fk.jpg
http://i42.tinypic.com/11ta3bq.jpg
RB25DET Turbo Inlet Pipe with recirculation and breather lines - SOLD!
http://i42.tinypic.com/332zbxi.jpg
RB25DET OEM Crossover Pipe - $25
Includes OEM coupler that attaches it to the throttle body
http://i41.tinypic.com/2s8fmtg.jpg
http://i42.tinypic.com/29m1t8i.jpg
RB25DET OEM Turbo Recirculation Valve - $25
http://i40.tinypic.com/xgmdjq.jpg
RB25DET OEM Fuel Rail with 370cc Injectors - SOLD!
http://i42.tinypic.com/s4tes9.jpg
RB25DET OEM Fuel Pressure Regulator - $25 each
Have two, both in excellent working order.
http://i44.tinypic.com/nrqpt.jpg
RB25DET Series II OEM Injector Connectors - SOLD!
Someone might be looking for these, I dunno. Swapped them out for Denso plugs when I upgraded to bigger injectors.
http://i39.tinypic.com/vqsd2u.jpg
RB25DET OEM Oil Cooler / Filter Block - SOLD!
Great condition, removed to install an aftermarket cooler.
http://i42.tinypic.com/wanli1.jpg
http://i43.tinypic.com/2mpd93a.jpg
1/8" BSPT to 1/8" NPT Oil Pressure Sensor Adapter - $12 shipped (via regular mail)
You need this to run your factory 1/8" BSPT oil pressure sensor in any standard 1/8" NPT aftermarket oil filter relocation or oil cooler block adapter. Useful if you want your 'idiot light' to remain functional as a backup to your aftermarket pressure gauge, or if you are not running an aftermarket gauge at all. This was hard to find.
http://i42.tinypic.com/wciwxu.jpg
RB25DET OEM Exhaust Cam Gear - $25
http://i42.tinypic.com/i2simb.jpg
RB25DET/RB20DET OEM Flywheel Bolts x6 - $20
Excellent condition, I upgraded to an R32 RB26DETT flywheel which uses a different length bolt.
http://i40.tinypic.com/35c516w.jpg
RB25DET Cometic Intake Collector Gasket - $15
Brand new never used. Made out of 0.60" thick Cometic "AFM" material, recommended when running more than stock boost. For OEM crossover style manifold.
http://i44.tinypic.com/16c1lkj.jpg
RB25DET/RB20DET OEM turbo compressor elbow gasket 3-bolt (new) - SOLD!
RB25DET/RB20DET OEM turbo outlet gasket 6-bolt (new) - SOLD!
RB25DET/RB20DET OEM turbo outlet gasket 6-bolt (used 200 mi) - SOLD!
Took off the used outlet gasket after using it only a couple hundred miles, because I installed a new V-band turbo. Only has slight discoloration, it is the one pictured on the right. Don't have a picture of the new one, it is still in the packaging though. FRSport wants $30+tax and shipping for a new one! :|
http://i42.tinypic.com/htvair.jpg
RB25DET OEM turbo lock washers - SOLD!
Brand new still in the packaging.
http://i43.tinypic.com/10pq8lu.jpg
RB25DET OEM misc turbo oil/coolant line stuff - $5 for any piece
Just some random turbo lines/stuff that I have left over. There is an oil feed hardline, a coolant feed hardline, half of the coolant return line (turbo side banjo fitting is cut off, rear section is there) and a used oil drain hose with clamps. Make me an offer for all of it? I switched to stainless braided lines.
http://i41.tinypic.com/2ziovg8.jpg
RB25DET/VG30DE(TT) OEM Thermostat - $10
Works great, removed to install colder Nismo unit. Includes free Permatex thermostat housing gasket maker.
http://i55.tinypic.com/281d06t.jpg
I am willing to ship any of this stuff, if you need a shipping quote I should be able to get you one within a couple days. I have a scale here and I just get quotes directly from the courier's website. I ship FedEx or USPS with tracking number provided the same day I ship. I ship everything from San Diego, 92101. Local pickup available.
I accept PayPal on the condition that you add the usual 3% of the total cost to cover fees.
Please post here or PM me with any questions. Thanks for looking!