s14 wiring help please

[Vandy5]

I have two questions to start on the wiring of my new s14 sr20 that i am putting into my 97 240.

In the First pic i am starting with the lower harness and this is the main power and what looks to be two grounds as well. The bigger one that i drew red on it the power and the other two white lines are grounds. Is that correct?

http://i988.photobucket.com/albums/af5/Vandy555/IMG_0753-1.jpg

In the second pic are the two harness clips that are on the lower harness. My sr came with both ends of these plugs. Should i cut the old ones off and replace with these news ones. And are the old plugs the ones that i drew the white lines too.

http://i988.photobucket.com/albums/af5/Vandy555/IMG_0752-1.jpg

Here are a few pics of the motor so far have done tons to the car and need to start a build thread soon. Thanks for your help!

http://i988.photobucket.com/albums/af5/Vandy555/IMG_0749.jpg

http://i988.photobucket.com/albums/af5/Vandy555/IMG_0748.jpg

http://i988.photobucket.com/albums/af5/Vandy555/IMG_0747.jpg

http://i988.photobucket.com/albums/af5/Vandy555/DSC03937.jpg

[Vandy5]

also i am repining my F4 plug based off this guide http://zilvia.net/f/tech-talk/209158...4-chassis.html

and have concerns my new sr20 F4 plug is missing a few wires 41-44 and a few others as well i stopped once i noticed i was missing those others. Any input? anything helps thanks

[krappy]

use the lower harness off your KA, if not you can just repin those plugs by the fusebox.

[Vandy5]

so i could just use those plugs right there just replace the old ones with the ones that came with the sr20?

[Vandy5]

Bump for morning replys