petermcnulty
12-28-2011, 11:04 AM
have a cylinder head for s13 sr20det blacktop that has been through the machine shop. has
supertech valves
supertech valve guides
supertech dual valve springs
oem valve locks
oem valve seals
oem cams.
fully assembled/5 angle valve job/tanked and fully cleaned/decked/aggressive port and polish/shimmed
NH partout master list - Page 2 - 240sxONE Forums (http://forums.240sxone.com/showthread.php?t=22692&page=2)
some pics the machinist took during the process. i have more on my phone so if anyone has interest. shoot me a text.
head is ready to drop on. shouldn't need anything but a headgasket, ill even throw in arp head studs (used)
long story short head has about 4-5k on it. spun a bearing right after the break in and was turn down instantly. head is nothing short of PERFECT
spent over about 1200 in machine work alone let alone the cost of the parts. my loss your gain
1000$ picked up/ 1100$ shipped
supertech valves
supertech valve guides
supertech dual valve springs
oem valve locks
oem valve seals
oem cams.
fully assembled/5 angle valve job/tanked and fully cleaned/decked/aggressive port and polish/shimmed
NH partout master list - Page 2 - 240sxONE Forums (http://forums.240sxone.com/showthread.php?t=22692&page=2)
some pics the machinist took during the process. i have more on my phone so if anyone has interest. shoot me a text.
head is ready to drop on. shouldn't need anything but a headgasket, ill even throw in arp head studs (used)
long story short head has about 4-5k on it. spun a bearing right after the break in and was turn down instantly. head is nothing short of PERFECT
spent over about 1200 in machine work alone let alone the cost of the parts. my loss your gain
1000$ picked up/ 1100$ shipped