S13/SR20det.. APEX'i, Tomei, Volk, HKS

[Epik]

After a lot of thought, I am parting out my 1989 S13 hatch and everything in or on it. I'll just list it, with a price I'd like to get for it. If you are interested, I will consider reasonable offers. E-mail me or PM, please dont clutter the list

Redtop SR20 APEX'i Power FC and Commander $850.00
Nismo 740cc side feed injectors in stock rail $400.00
Nismo Lightweight flywheel and metal clutch $500.00
AEM adjustable fpr and NOS liquid filled guage $100.00
HKS 2510 turbo.. bolts on stock, perfect condition $600.00
HKS stainless turbo extension.. modified for USDM $100.00
Garrett T3 60-1 (.70a/r comp, .48 a/r exh, StgIII) $400.00
Cusco front and rear strut bars $125.00ea or $200.00pair
TEIN HR coilovers and front camber plates, rebuilt $650.00
180sx rear center light panel $75.00
Cusco Spin-turn knob..blue $20.00
Z32 MAF and plug $150.00
1996 S14 seats, gray $250.00 pair
S14 5 lug conversion hubs and knuckles $350.00
Volk TE37 rims 18/8.5, 18/9.5 +40 5x114.3.. powdercoating has been stripped and have been partially polished. $1000.00
GanaDor power door mirrors, pass side needs glass, painted Nissan OEM dark blue $150.00

Redtop SR20det. Had lower oil pressure than I was comfortable with so I took it off the road. Pulled pan and found slight bearing residue. Motor was recently rebuilt with GTiR con rods and new rings and all seals. Has GReddy 1.2mm headgasket and adjustable cam gears. Sold as is with newly rebuilt transmission. Asking $1500.00 plus shipping for this motorset with stock ECU, modified harness, ignitor and stock MAF. DOES NOT include a turbo. Will sell with HKS 2510 for $2000.00 plus shipping.
Email for further details.

Jeff Kipe-owner-Epik Motorsports

[Epik]

Come on guys and girls.. there is something listed here for everyone.. Take a look!!

:aw:

[Epik]

-removed items no longer for sale.. updated info on motor set and added price. :D

[bztech]

Hmmm sounds like you have some nice stuff. Are you negotiable at all? I mean most of your stuff is pretty pricey for used stuff. Especially a motor that at the least needs a re-ring job (rings, bearings, etc). Just a suggestion....

[GoKu]

check your PM box please ..

[Epik]

Originally posted by bztech
Hmmm sounds like you have some nice stuff. Are you negotiable at all? I mean most of your stuff is pretty pricey for used stuff. Especially a motor that at the least needs a re-ring job (rings, bearings, etc). Just a suggestion....

Read the ad again and you will see that I am..

I'll just list it, with a price I'd like to get for it. If you are interested, I will consider reasonable offers.

I dont think that some of the prices are high at all. If you are interested in something why dont you PM me and we'll talk there.

In regards to the motor.. It has about 3500 miles on the complete rebuild.. new valve seals and rings and all gaskets. The motor has a GReddy 1.2mm head gasket on it ($210.00 there..and re-usable) It has adjustable cam gears in it ($250.00 there) and it has GTiR con rods in it. The rebuilt transmission has about 250 miles on it. If you add the HKS 2510 turbo to the mix for $2000.00, total, I dont think it is a bad deal at all.. for the right person that is capable of installing a new oil pump and a set of bearings. Still come out well under the $2400-$2500.00 that a swap is running these days and you dont know what you are getting.

Jeff

[bob marley]

I sent you an e-mail and pm

[mmtmatrix]

Email and PM sent. Very interested, email me back at [email protected]

Thanks -- talk to you soon,
mmtmatrix

[turboex]

what kind of package deal could i get on the power FC, MAF, and injectors. Shoot me an email at [email protected]
thanks for your time

[Epik]

Redtop SR20 APEX'i Power FC and Commander $850.00
Nismo 740cc side feed injectors in stock rail $400.00
Z32 MAF and plug $150.00
Garrett T3 60-1 (.70a/r comp, .48 a/r exh, StgIII) $400.00
HKS stainless turbo extension.. modified for USDM $100.00
TEIN HR coilovers and front camber plates, rebuilt $650.00
S14 5 lug conversion hubs and knuckles $350.00
***SALE PENDING ON ABOVE*** if not sold, I will re-post.


Cusco front and rear strut bars $125.00ea or $200.00pair
***SOLD***

Nismo Lightweight flywheel and metal clutch $500.00
AEM adjustable fpr and NOS liquid filled guage $100.00
HKS 2510 turbo.. bolts on stock, perfect condition $600.00
180sx rear center light panel $75.00
Cusco Spin-turn knob..blue $20.00
1996 S14 seats, gray $250.00 pair
Volk TE37 rims 18/8.5, 18/9.5 +40 5x114.3.. powdercoating has been stripped and have been partially polished. $1000.00
GanaDor power door mirrors, pass side needs glass, painted Nissan OEM dark blue $150.00

Redtop SR20det. Had lower oil pressure than I was comfortable with so I took it off the road. Pulled pan and found slight bearing residue. Motor was recently rebuilt with GTiR con rods and new rings and all seals. Has GReddy 1.2mm headgasket and adjustable cam gears. Sold as is with newly rebuilt transmission. Asking $1500.00 plus shipping for this motorset with stock ECU, modified harness, ignitor and stock MAF. DOES NOT include a turbo. Will sell with HKS 2510 for $2000.00 plus shipping.
Email for further details.

Jeff Kipe-owner-Epik Motorsports


**Updated list for sold and pending parts... everything else there is still available!!:D

[ryan hagen]

how much for jsut the rear 5 lug hubs?

[Epik]

Originally posted by ryan hagen
how much for jsut the rear 5 lug hubs?

Sorry, forgot to add the 5 lug conversion to the list of sales pending/on hold.

Updated the ad..again. Keep 'em coming guys!

[sickdoode]

ill give u 280 shipped for the lug conversion parts

[Epik]

Originally posted by sickdoode
ill give u 280 shipped for the lug conversion parts

"doode":hammer:

did you read the ad or the updates? and with lowballing like that you may as well have saved the time anyway.. at least PM your joke next time to we dont waste space. Do you have any idea of the weight of the knuckles and hubs?? 280.00 shipped.. geez

[sickdoode]

geezus :axe: no need for violence
an offers an offer, how bout 260 and i pay for shipping? =D

[Epik]

:D LOL.. no problem man. But I updated the ad the other day to reflect the 5 lug conversion is no longer on the market. BTW, I sold them for $300.00/pick-up.

;)

Oh..buyer fell thru on the Tein HRs and camber plates. I will offer them up at the same price I was giving that guy.. $675.00 shipped FIRM in the Continental US.

[Siizzzoooo]

DAMN IT! i need a 5 lug conversion badly :(

[knghtryde]

I'm looking for the SMIC from the S13 with all hardware and intercooler/turbo piping. Please let me know if you have anything that would fit this description. Thanks.

[Epik]

Originally posted by knghtryde
I'm looking for the SMIC from the S13 with all hardware and intercooler/turbo piping. Please let me know if you have anything that would fit this description. Thanks.

I actually have a few SMIC from the s13 laying around. 3 I think.
Most have the vents to the bumper on them too. No piping came with them unfortunately. $100.00 shipped for the SMIC.

I also have an NPR that was underhood mounted on my S13. The smaller NPR with the angled in/out 2.5". Going from memory the core is 19"/2"/8" I believe. Perfect condition.. I'll try and find a pic of it in the car. $300.00 shipped.

here's the pic(s)
http://www.epikmotorsports.com/sitehome/images/projects/EpikSR20_003a.jpg

Thanks, Jeff

[knghtryde]

Where are you located at?

[Epik]

Update to For Sale List!!

Volk TE37s are no longer For Sale!! Couldn't part with them since they will fit my new car as well :wtc:

Still have:
Redtop SR20det motor with GTiR con rods, all new rings and seals, GReddy 1.2mm steel head gasket, adjustable cam gears.
Needs new set of bearings and recommend an oil pump as well. Ran fine but oil pressure was slightly lower than I'd prefer.. Rebuild it with a few bucks and have a much stronger motor than stock for less money than buying just a regular swap. Only 3500 miles on motor since the last rebuild. Includes transmission rebuilt 250 miles ago. Includes harness (already modified for 89-94 S13!!.. just drop in..plug in and go) ignitor and stock MAF and 62 ECU. No turbo included in this set up ready to go for $1500.00. Will include an HKS 2510 (300hp) turbo in excellent condition for $2000.00 FIRM for the package. Fits in stock location. Basically same specs as the GT2530 without the BB housing and GT series wheel. Older HKS turbo, but in perfect condition. Can run with stock injectors, MAF and ECU on stock actuator until you can upgrade.

Nismo Lightweight flywheel for RWD SR, in a package with the Nismo brass button clutch. Dont let the description scare you, this is an easy to drive clutch that grips and wont let go, but engagement is very nice. Daily driven for about 3500 miles. Tons of life left on it. Puts the SPEC and ACT that I have driven on to shame.
$500.00 for the clutch AND flywheel

Tein HR coilovers. Front pillow balls and camber plates. Excellent condition. Spring rate is 8kg/mm front and 6kg/mm rear. Damper is set, not externally adjustable, but is height adjustable. Includes the tender springs to keep spring in seat. Very nice set re-valved to drift specs, just bolt them on, set to your desired height and drive.
$675.00 FIRM includes shipping in the Continental US.
http://www.epikmotorsports.com/sitehome/images/newpics/tein_pic01a.jpg

Thanks guys.. as always, please PM me to keep the list clutter free!

Jeff

[Epik]

Originally posted by knghtryde
Where are you located at?

Myrtle Beach, SC.. its in my Profile :D

[phatkorean]

Could I get the power window amp? I'm in Norther Virginia.

[TheSparo]

ive never heard of the tein HR... its not on their site either...

[Epik]

Originally posted by TheSparo
ive never heard of the tein HR... its not on their site either...

It is an older set, They were bought off Japanese Yahoo after being rebuilt by Tein Japan last year. Non adjustable damper, height adjustable coilover. Rest of the specs are above.

[phatkorean]

Also looking for AIV, trunk lid/cover and the Power Antenna.

[Epik]

Here is a pic for those asking about the Tein HR coilovers for S13.

Again..complete set of 4 with pillowball mounts and camber plates in front for $675.00 shipped in the Cont US.

http://www.epikmotorsports.com/sitehome/images/newpics/tein_pic01a.jpg

http://www.epikmotorsports.com/sitehome/images/newpics/tein_pic02a.jpg

thanks, Jeff

[Sinistercivic]

do u have a picture of the seats? And what are the specs on the HKS 2510?

[Epik]

cut from reply above

Will include an HKS 2510 (300hp) turbo in excellent condition for $2000.00 FIRM for the package. Fits in stock location. Basically same specs as the GT2530 without the BB housing and GT series wheel. Older HKS turbo, but in perfect condition. Can run with stock injectors, MAF and ECU on stock actuator until you can upgrade.

The seats are still in the car, I may be able to get pics when I get back. They are from a 1996 s14 base model. Dark gray cloth. Excellent condition.

Thanks

[Epik]

I need to add something here. This is not a game. One person contacted me about the Power FC and several other items and I agreed to a package price on them. Due to the fact that this person was out of town, I agreed to hold the items for him with a 10% deposit, until he got back home and sent the rest of the money. During this past week, I have turned down several sales on these items based on this person's word. Bad enough that they have dropped items out of the package deal over the course of the week, but still claimed the PFC and Commander. Now, this buyer wants to back out entirely. DEPOSITS ARE JUST THAT. They are a guarantee on your word that you have agreed to buy something and a guarantee of my word that it will be held for you. DEPOSITS ARE NON-REFUNDABLE.

These are my personal items. I do own a shop but this is in no way involving my business. Payment is required up front, cashier's check or money order. Personal check accepted but it must clear the bank before items will be shipped. No COD. I have the ability to accept credit cards also for your security if you want to.
PM or e-mail me for the rest of the details.

I'm not out to screw anybody over, just trying to sell my parts as quickly and smoothly as possible so I can get on to my next project.

Thanks!! Jeff

[h0m3skill3t]

you said you werent selling the wheels, but could u post a pic of them...im looking to get wheels and can't decide. and to keep on topic..what is the deal with the tender springs on the coilovers? thanks

[phatkorean]

Come on people, this is business. I made my deal with Jeff and I paid. I totally agree with you Jeff. A piece like a Power FC is not to be taken lightly. Too many people get big eyes when they see a good deal not knowing that it is out of their league.

[Epik]

**Updated list of Items..For Sale and Sold**

Redtop SR20 APEX'i Power FC and Commander $850.00 SOLD
Nismo 740cc side feed injectors in stock rail $400.00 SOLD
Nismo Lightweight flywheel and metal clutch $500.00
AEM adjustable fpr and NOS liquid filled guage $100.00 SOLD
HKS 2510 turbo.. bolts on stock, perfect condition $600.00
HKS stainless turbo extension.. modified for USDM $100.00
Garrett T3 60-1 (.70a/r comp, .48 a/r exh, StgIII) $400.00 SOLD
Cusco front and rear strut bars $125.00ea or $200.00pair SOLD
TEIN HR coilovers and front camber plates, rebuilt $650.00 SOLD
180sx rear center light panel $75.00
Cusco Spin-turn knob..blue $20.00
Z32 MAF and plug $150.00 SOLD
1996 S14 seats, gray $250.00 pair
S14 5 lug conversion hubs and knuckles $350.00 SOLD
GanaDor power door mirrors, pass side needs glass, painted Nissan OEM dark blue $150.00

Redtop SR20det. Had lower oil pressure than I was comfortable with so I took it off the road. Pulled pan and found slight bearing residue. Motor was recently rebuilt with GTiR con rods and new rings and all seals. Has GReddy 1.2mm headgasket and adjustable cam gears. Sold as is with newly rebuilt transmission. Asking $1500.00 plus shipping for this motorset with stock ECU, modified harness, ignitor and stock MAF. DOES NOT include a turbo. Will sell with HKS 2510 for $2000.00 plus shipping.
Email for further details.


Please read the list carefully before e-mailing..SOLD items are noted.

Thanks!

[nlzmo400r]

u sure u dont want to get rid of those TE-37s? maybe we could work sometihng out? if you're interested email me: [email protected]

[Steeles]

damnit jeff I needed those injectors :p and you KNOW howe much I wanted that power FC

[scottie]

Steeles-

Sorry man I didnt mean to buy them if you were. I just want to thank Jeff for the courtesy and professionalism he showed during our transaction. He was helpful with any questions I had and was very easy to work with. I recommend doing business with him anytime.

[Steeles]

haha nah man I just saw that he was selling them so i never even got the chance. Im still gonna kick jeff for itcause well... he KNE i needed more fuel :)

[Epik]

haha nah man I just saw that he was selling them so i never even got the chance. Im still gonna kick jeff for itcause well... he KNE i needed more fuel :)

Thanks Scottie.. shipping your package today. I PM'd you the info.


Okay guys..updated list.. I still have the:

Nismo Lightweight flywheel
Nismo "brass-button" clutch
Both in excellent condition.. flywheel makes a big difference and the clutch is awesome.. $500.00 plus shipping for both. I'll have pics up in a day or so.

NPR front mount intercooler. Core dimensions are 19"Wx2"Dx8"H ( those are off the top of my head). Almost 100% condition since it was under hood mounted..no bent fins!! 2.5" in and outlets.
$300.00 shipped

SR20det mild steel DP, has extra bung for wideband O2 on the dyno. $100.00 shipped

HKS 2510 turbo. Will have pic up soon. Can run safely with stock injectors and MAF on SR20det up to the limit of the stock actuator. Nice upgrade that is capable of around 280HP with supporting mods. Not ball bearing.. not GT series wheel. On my car it spooled at 2700 rpm and was at full boost (1 bar) by 3200 rpm. Excellent condition and cheap at $600.00 shipped.. retail was $1250.00 last time I saw it on HKS.jp site.

HKS Stainless O2 housing for SR20det.. modified for LHD use. Pics up soon..
buy the turbo and HKS O2 housing together for $700.00 shipped.

Cusco Drift Spin turn knob. Blue $20.00 shipped.

Zenkei (non Type X) 180sx taillight center $75.00 shipped

***Shipped prices are in the Continental US only**Will ship outside US for actual shipping costs paid by buyer***

Thanks!

[uiuc240]

Do you still have the S14 seats for sale? Any idea of the shipping cost to 60446? Also, if you do still have them, could you zap a couple of pictures to me?

[email protected]

Thanks,
Eric

[h0m3skill3t]

Thanks Scottie.. shipping your package today. I PM'd you the info.


Okay guys..updated list.. I still have the:


NPR front mount intercooler. Core dimensions are 19"Wx2"Dx8"H ( those are off the top of my head). Almost 100% condition since it was under hood mounted..no bent fins!! 2.5" in and outlets.
$300.00 shipped



Thanks!

would you be selling the piping along with the intercooler?

[Epik]

would you be selling the piping along with the intercooler?

well, the piping was only 20" overall, and I have already cut it up and used it for building plumbing on another car.

**uiuc240.. I took a deposit today on the seats from a local guy. I'll be holding them for a week or so till he gets his taxes back. If he falls thru I'll post some pics for you.

Thanks!

[uiuc240]

**uiuc240.. I took a deposit today on the seats from a local guy. I'll be holding them for a week or so till he gets his taxes back. If he falls thru I'll post some pics for you.

Thanks!

No sweat...the shipping will probably eat my ass anyway. But let me know.

Eric

[nlzmo400r]

is the motor and turbo still for sale for 2k?

[Epik]

is the motor and turbo still for sale for 2k?

yes. Includes redtop Sr20det motor rebuilt 3500 miles ago, GTiR connecting rods, GReddy 1.2mm headgasket, adjustable cam gears, rebuilt 5 speed tranny with 250 miles on it. Also will come with stock 62 ecu, stock injectors and stock MAF. Harness already modified for use in S13. HKS2510 turbo.

Recommend oil pump replacement and new set of crank bearings.

$2000.00 complete.. buyer pays shipping, I will pallet

[Joe_M]

I still want the HKS elbow, but haven't heard anything back from you in a while. Still want to sell it? Is it still on the car?

Joe

[Epik]

I still want the HKS elbow, but haven't heard anything back from you in a while. Still want to sell it? Is it still on the car?

Joe

yes, everything is off the car now. PM me for info on payment and shipping, I'll do it for $100.00 shipped.

Thanks, Jeff

[NeedCAforS13]

PM'd you about the HKS turbo:)

Sean

[Sleeping240]

epik im interested in the coilovers and the power fc ( by the way how did that work out for you?? did you like the setup???? )



^^^ serious about buying these..

e-mail me at [email protected]

[Sleeping240]

opps sorry didnt see the update :wavey:

[turboex]

still wanna sell those injectors? write me
[email protected]

[MAXATX]

looking for a #62 or #63 ECU, you wouldn't have one by chance would you?
Chris