PDA

View Full Version : UT FS: '91 240SX fastback, SR


mikerbike
12-21-2011, 11:01 PM
'91 240SX Fastback

Suspension stuff:
-Megan track series coilovers
-Godspeed RUCA and toe rods (I don't know how to properly adjust traction rods, so I didn't buy them.)
-Megan Front strut tower brace
-Wicked Tuning tension rods
-Custom modded knuckles
-MAX rack spacers
-S14 rear 5 lug hubs
-2x 17x9 +20 5Zigen FN01R-C 4 LUG
-4x 17x9 +35 XXR 962s 5 LUG
-2x 18x8.5 +35 XXR 962s 5 LUG

Engine stuff:
-Blacktop engine
-S15 SR T28 bb turbo (no tune, 10psi)
-Spektre air filter
-light flywheel, Forgot the brand
-RPS pressure plate with stock clutch disk.
-Greddy Profec Spec-B boost gauge (bad solenoid I think, so I just use it to monitor boost.)
-Homemade 'high-mount' intercooler setup
-TurboXS BOV
-Megan outlet elbow and downpipe (elbow has been welded a few times. Currently has a crack. I'll probably weld it soon.)
-BoneZ 3" catalytic converter (also have a test pipe)
-Blitz 3" exhaust (pretty quiet, don't know the model)
-Stock clutch fan and shroud
-stock ratiator


Other stuff:
-Max adjustable shift knob, orange
-Purple spray-painted Grant steering wheel or Personal wheel from a '75 Triumph
-Quick-release hub
-Welded Diff
-B12 seatbelts
-MOMO T-Bucket left seat
-S14 right seat
-Razo turbo timer
-Beat up body kit (front is ?Origin? but the lip is not original, sides are Raceonusa, rear is AIT or something else crappy)
-PDM Wangan style wing/spoiler
-huge dent in R quarter panel
-modified front crossmember ready to install. Rack moved forward as far as possible. INSTALLED 1/9/12
-The dash is pretty torn up. You can see in one of the pics.
-Currently has the maroon hood and blue outer valence pieces on the stock rear bumper
-Broken windshield, I might get around to replacing it soon. Maybe not.


$4500

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/375233_10150445376667223_555067222_10248229_210378 4582_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/382829_10150445377532223_555067222_10248231_148720 4748_n.jpg
^After I pushed the dent out as much as I could.^
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/374129_10150445375757223_555067222_10248224_340034 617_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/263599_10150300502772223_555067222_9160430_1904811 _n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/294000_10150321666966455_692926454_8076460_1150246 681_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/227251_10150186088477683_668807682_7114112_382694_ n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash2/37328_139837159363898_100000128452133_400011_51529 80_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/180780_10150142953387223_555067222_7945267_793524_ n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/216308_10150209323972223_555067222_8329078_4811884 _n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/391133_10150448906677223_555067222_10264680_964642 68_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/381860_10150521636557223_555067222_10491773_350415 027_n.jpg
^17x9 +35 w/ 245/35, no spacers.

http://www.youtube.com/watch?v=hgsqaZYSO9c

I'm on here usually every day, but if you want pics of anything specific or have a serious offer, shoot me a text @ (435)327-0875
The car is located in SLC, UT

mikerbike
12-22-2011, 05:23 PM
Welded on some ebrake leverage. I've been meaning to cut it shorter.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/378420_10150532999847223_555067222_10537635_113746 9356_n.jpg
A better shot of the engine.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/397549_10150532999942223_555067222_10537636_109715 1414_n.jpg

mikerbike
01-14-2012, 03:04 PM
Modified front subframe installed on 1/9/12. Rack forward ~28mm.
Rear 5 lug hubs installed on 1/13/12
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/375257_10150550669197223_555067222_10623925_112208 1465_n.jpg

Austin /240
07-01-2012, 02:12 PM
Do you still have your car?