chickenmanq
01-21-2002, 05:38 PM
<img src=http://dana.ucc.nau.edu/~mka/shifter1.jpg>
First pic: Part no 32145 is what I need. That's a 96 240sx diagram.
<img src=http://dana.ucc.nau.edu/~mka/shifter2.jpg>
Note the stem height where the bottom of the stick engages the tranny lever.
<img src=http://dana.ucc.nau.edu/~mka/shifter3.jpg>
That top plate with the six bolts is what's screwing me. The 240 one is shorter, allowing the stem to engage the tranny. Part is only 40 bucks from Nissan.
<img src=http://dana.ucc.nau.edu/~mka/shifter4.jpg>
I am pissed.
<img src=http://dana.ucc.nau.edu/~mka/shifter5.jpg>
The tall truck shifter.
<img src=http://dana.ucc.nau.edu/~mka/shifter6.jpg>
On the bright side, did disconnect door buzzer.
<img src=http://dana.ucc.nau.edu/~mka/shifter7.jpg>
Had to help my boss get his BMW K1 in the house for scheduled maintenance. Nissan tailgates make good ramps. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'> It got a little dented. Oh well.
Sorry the post is so long. Yes, I am planning on making the 240 shifter work.
(Edited by chickenmanq at 5:53 pm on Jan. 21, 2002)
First pic: Part no 32145 is what I need. That's a 96 240sx diagram.
<img src=http://dana.ucc.nau.edu/~mka/shifter2.jpg>
Note the stem height where the bottom of the stick engages the tranny lever.
<img src=http://dana.ucc.nau.edu/~mka/shifter3.jpg>
That top plate with the six bolts is what's screwing me. The 240 one is shorter, allowing the stem to engage the tranny. Part is only 40 bucks from Nissan.
<img src=http://dana.ucc.nau.edu/~mka/shifter4.jpg>
I am pissed.
<img src=http://dana.ucc.nau.edu/~mka/shifter5.jpg>
The tall truck shifter.
<img src=http://dana.ucc.nau.edu/~mka/shifter6.jpg>
On the bright side, did disconnect door buzzer.
<img src=http://dana.ucc.nau.edu/~mka/shifter7.jpg>
Had to help my boss get his BMW K1 in the house for scheduled maintenance. Nissan tailgates make good ramps. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'> It got a little dented. Oh well.
Sorry the post is so long. Yes, I am planning on making the 240 shifter work.
(Edited by chickenmanq at 5:53 pm on Jan. 21, 2002)