PDA

View Full Version : CA garrett t25 turbos


rongfk
12-08-2011, 06:01 PM
s13 garrett .80 a/r t25 with wastegate actuator and hot/cold pipes $150 on the left.
another garrett .48 a/r t25 with new bearings but needs new oil seal on the right will cone with steal braided oil return line and the waste gate actuator from a s13 turbo $150.

i am open to offers.

http://farm8.staticflickr.com/7005/6463051985_a9e44048d9_z.jpg

schrackman
12-09-2011, 01:01 AM
Could you post a closeup picture of the compressor and turbine housing on the s13 turbo, please? Thanks.

Ray

rongfk
12-09-2011, 02:14 PM
i had this one on my phone, but ill take better pictures over the weekend.

http://farm8.staticflickr.com/7008/6483366121_1961fed365_b.jpg

schrackman
12-09-2011, 03:34 PM
Thanks. That will do. I'm actually looking for the t25 with .48 A/R on the compressor housing. I believe they came stock on the ca18det engines, although I may have to settle for one with the .80 A/R if I can't find one.

Ray

rongfk
12-09-2011, 03:48 PM
the one on the right has a .48 ar

schrackman
12-09-2011, 03:53 PM
What are you asking for it? Also, does it utilize the same t25 flange as the sr20 turbo?

rongfk
12-09-2011, 04:06 PM
i had it rebuilt and forgot to have them clock it for my aplication. so i clocked it my self and messed up the oil seal putting it back, so it will need another. im asking 150, which is less than what i payed for it, and to have it rebuilt. but i am open to offers on either one.

oh and yes it uses the same 5 bolt down pipe plange.

schrackman
12-09-2011, 04:17 PM
oh and yes it uses the same 5 bolt down pipe plange.

Cool, however I also need to know if it will bolt up to a normal t25 manifold because that is what my manifold will be. FYI, I'm not a Nissan guy which is why I have to ask these questions. If it is, then please shoot me a blank email at rev44spike at yahoo dot com and I'll talk to you more about it later as I have to get to work right now.

Thanks

Ray

rongfk
12-09-2011, 04:40 PM
no worries. i dont have a nissan anymore my self, just a bunch of parts i need to get rid of. both of these turbos have been ran on my car on the same manifold.

.80 a/r s13 t25
http://farm7.staticflickr.com/6020/5938437420_4848e4a1ee_z.jpg

.48 a/r t25
http://farm5.staticflickr.com/4118/4921458056_18bc5a3f60_z.jpg

schrackman
12-10-2011, 12:27 AM
Email sent.

Ray