rb20det swap help

[emericanz]

im pretty far through my rb20det s13 swap and ran into a few issues one being power steering. my s13 is a 90 so the resivour is on the opposite side now i have the converstion for the rb pump and that line that connects to the steering rack.

but wht do i do about the line that "would" run under the oil pan then to the other side of the engine bay? i have the original hard line and rez but no line to the pump.

any help please?

[finesses240]

just get ka dohc p/s lines (high pressure, etc) , ka dohc reservoir, and a rb25 p/s pump. The rb20 hicas pump has two outlets and just plugging one of them is not the right way to do it, regardless what internet says.

[turbociv910]

mines plugged and it works fine. has been for years.

[emericanz]

yea mines set up for sohc. and i have everything but teh reservoir lines hooked up i have the rb20 pump and only one of the lines hooked up.

i think i just need to buy dohc set up...

[finesses240]

mines plugged and it works fine. has been for years.

well then you are one of the few lol. Everyone I have done and seen always blow the seal on the pump.

[S13Gene]

Just buy the Chase bay lines and reservoir and a rb25 ps pump