SchizophrenicMC
12-07-2011, 05:33 PM
I'm selling a CA18DET It's coming out of a 1987 Nissan 200SX, which carried the engine since July, when it was swapped in by the previous owner. The engine has about 60,000 miles on it. The exhaust manifold has been upgraded from a log-type collector, to a welded tubular collector, and the T25 turbocharger was rebuilt before the swap, by Garrett.
I haven't actually had a chance to put any miles on the engine, due to issues with the car it was in, but it's mechanically sound and I've seen it run.
The only problem the engine has, is it needs a new wiring harness. The existing harness was cut apart and spliced back together by the last owner, and it's done it no good. ]url=http://www.wiringspecialties.com]WiringSpecialties[/url] recently released their pre-made CA18DET harness, for $375.
Included with the engine is the long block, bellhousing, Exedy clutch, ECU, T25 turbocharger, exhaust downpipe, mounts, alternator, A/C compressor, starter, what's left of the engine harness, an SR20 igniter, a VG30 igniter, the turbo piping and intercooler that came with the car, an Autometer Boost/Vacuum gauge, and fuel and oil filters.
I'm asking $1000. I keep seeing them between $1400 and $1800 local, depending on your supplier, and while they come with the transmission, they don't come with any of the other bits I'm selling with this. In any case, the bellhousing mounts to the CA and SR trannies, and the only reason I'm not including a tranny is because the S12 tranny doesn't bolt into the S13/14. The engine harness is in shambles, but even if it was in good order, it would have to be modified to connect to a USDM S13 or S14.
I'll drop the engine off wherever you want it in D/FW, if you pay for gas, or you can pick it up. Doesn't matter to me.
I check my email frequently, but you can also call or text me at (682)221-4000. I'll answer any questions with regard to the engine.
Thanks for your time. Pics below:
http://i526.photobucket.com/albums/cc348/SchizophrenicMC/Nissan%20Silvia/09041101a.jpg
http://i526.photobucket.com/albums/cc348/SchizophrenicMC/Nissan%20Silvia/10121507a.jpg
http://i526.photobucket.com/albums/cc348/SchizophrenicMC/Nissan%20Silvia/10121507.jpg
http://i526.photobucket.com/albums/cc348/SchizophrenicMC/Nissan%20Silvia/10121507b.jpg
I'm also selling the S12 shell, if anyone's interested. I've got an offer on it, but I'll hear any interested party's offers (not that Zilvia guys like S12s anyway) anyway.
I haven't actually had a chance to put any miles on the engine, due to issues with the car it was in, but it's mechanically sound and I've seen it run.
The only problem the engine has, is it needs a new wiring harness. The existing harness was cut apart and spliced back together by the last owner, and it's done it no good. ]url=http://www.wiringspecialties.com]WiringSpecialties[/url] recently released their pre-made CA18DET harness, for $375.
Included with the engine is the long block, bellhousing, Exedy clutch, ECU, T25 turbocharger, exhaust downpipe, mounts, alternator, A/C compressor, starter, what's left of the engine harness, an SR20 igniter, a VG30 igniter, the turbo piping and intercooler that came with the car, an Autometer Boost/Vacuum gauge, and fuel and oil filters.
I'm asking $1000. I keep seeing them between $1400 and $1800 local, depending on your supplier, and while they come with the transmission, they don't come with any of the other bits I'm selling with this. In any case, the bellhousing mounts to the CA and SR trannies, and the only reason I'm not including a tranny is because the S12 tranny doesn't bolt into the S13/14. The engine harness is in shambles, but even if it was in good order, it would have to be modified to connect to a USDM S13 or S14.
I'll drop the engine off wherever you want it in D/FW, if you pay for gas, or you can pick it up. Doesn't matter to me.
I check my email frequently, but you can also call or text me at (682)221-4000. I'll answer any questions with regard to the engine.
Thanks for your time. Pics below:
http://i526.photobucket.com/albums/cc348/SchizophrenicMC/Nissan%20Silvia/09041101a.jpg
http://i526.photobucket.com/albums/cc348/SchizophrenicMC/Nissan%20Silvia/10121507a.jpg
http://i526.photobucket.com/albums/cc348/SchizophrenicMC/Nissan%20Silvia/10121507.jpg
http://i526.photobucket.com/albums/cc348/SchizophrenicMC/Nissan%20Silvia/10121507b.jpg
I'm also selling the S12 shell, if anyone's interested. I've got an offer on it, but I'll hear any interested party's offers (not that Zilvia guys like S12s anyway) anyway.