PDA

View Full Version : NY 89 240sx Hatch Sr20


ttgtomr
12-06-2011, 08:47 AM
Caged, Stitch welded, v-mount setup, blacktop sr20det, hydraulic ebrake plus the supporting mods. Cage passed redline time attack tech inspections. I haven't tried any other events.

The bad- needs an alternator, downpipe back exhaust, rear control arms to get the car 100% straight, body work (if you care about aesthetics) and a larger radiator fan.

The good- car is completely stripped, whole body was resprayed, this was built from the ground up. the front of the car was stitch welded. Cage is a weld in cage not bullshit bolt in. This car is no joke everything was done correctly. Has too many mods to list.

Reason for selling- Car was initially going to be used for time attack. I instead went for drifting. I tried out drifting and actually didn't like it. I'd rather get back into time attack and road racing. I have a 280z and a vr4 I am building and would rather pump money into those. Car just sits collecting dust.. Its sad to see it waste like thi

>>>>>>>>>>>>>>>>>>>>>>>>S13 Nissan 240sx<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< (http://www.pride-performance.com/S13-Nissan-240sx_ep_67.html)


I am willing to part the car out if I can not find a buyer. looking for 6k
any more info ask away
I also have a ton more pictures if needed. MOD LIST: -Mishimoto Radiator -Mishimoto 14&quot; Fan -Nismo Engine Mounts -Nismo Transmission Mount -Comp Clutch Stage 4 -Comp Flywheel -Walbro 255 LPH Fuel Pump -Greddy BOV -Project mu Pads Front Type NS -Project mu Pads Rear B Force -Brembo Rotors F+R -Megan Racing Adjustable Lower Control Arms -Megan Racing Sway Bar -Carbing Front Strut Bar -Tien Rear Strut Bar -Tien Basics Coilovers -Sparco Pro 2000 Seat -K-Sport Hydraulic Ebrake -Nardi Deep Corn Steering wheel -NRG hub and quick release -NRG Wheel lock -AEM Digital Boost Gauge -HKS EVC 4 Boost Controller -Diamond Racing Wheels

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/10932_102404499780033_100000314505422_58929_458442 8_n.jpg
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/23547_110486445638505_100000314505422_157115_69370 75_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/23547_110486422305174_100000314505422_157110_70947 03_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-snc7/26718_112769332076883_100000314505422_165242_74028 55_n.jpg
http://www.pride-performance.com/assets/images/frankie-240-1.jpg
http://www.pride-performance.com/assets/images/frankie-240-2.jpg
http://www.pride-performance.com/assets/images/frankie-240-3.jpg
http://www.pride-performance.com/assets/images/frankie-240-5.jpg
http://www.pride-performance.com/assets/images/frankie-240-6.jpg
http://www.pride-performance.com/assets/images/frankie-240-7.jpghttp://www.pride-performance.com/assets/images/frankie-240-9.jpg
http://www.pride-performance.com/assets/images/frankie-240-20.jpg
http://www.pride-performance.com/assets/images/frankie-240-19.jpg
http://www.pride-performance.com/assets/images/frankie-240-18.jpg
http://sphotos.xx.fbcdn.net/hphotos-ash4/302117_266888819998266_100000314505422_883816_4405 76173_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-ash4/298299_251984011488747_100000314505422_835614_1259 09_n.jpg
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/262979_241252662561882_100000314505422_798429_4042 455_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-snc6/216723_244063238947491_100000314505422_808922_8212 286_n.jpg
oH5JvIhtcKk

ttgtomr
02-06-2012, 10:49 PM
Bump will take 5500-------

MrLettus
02-06-2012, 10:54 PM
I may be interested. Is it drive-able?

ttgtomr
02-06-2012, 11:02 PM
Drives quite well actually

ttgtomr
02-07-2012, 11:31 AM
The car also has a carbing front strut bar, tien rear strut bar (cosmetic since its caged in the rear), tien basic coilovers, megan front control arms, project mu pads, hks evc4, aem digi boost gauge, oilpan guard.. I might be willing to part the car out down the road but some of the parts will be used on my 1gen zed and vr4.

ttgtomr
02-08-2012, 02:07 PM
Will sell the car less the seat, steering wheel, hks evc4, wheels and boost gauge for 4500.

ttgtomr
02-17-2012, 09:20 PM
Bump seriously thinking about using the sr20 on my 280z now..

ttgtomr
02-23-2012, 09:03 PM
Bumping it up

ttgtomr
02-26-2012, 07:32 PM
3500 for the roller chassis with all of the suspension. Need this sold.

ttgtomr
02-29-2012, 03:58 PM
To the top. Will entertain offers!!

UNDECIDEDFBODY
03-01-2012, 07:47 PM
Trades 95 z28

ttgtomr
03-02-2012, 02:00 PM
Thanks for the offer but I need cash to finish my other projects.

ttgtomr
03-03-2012, 10:10 PM
will take 5250 for the car.

ttgtomr
03-05-2012, 02:50 PM
Seriously, no interest?

mex240sx
03-05-2012, 03:19 PM
nice track/drift car. glws

ttgtomr
03-05-2012, 04:42 PM
nice track/drift car. glws

Thanks buddy!

mex240sx
03-05-2012, 04:49 PM
Thanks buddy!

waiting on uncle sam money.

ttgtomr
03-06-2012, 02:53 PM
Going to part out the car, will make a new thread soon. Mod can lock/delete this thread.

Doomsdayvillian
07-20-2012, 09:45 PM
Hey please pm me if still for sale!!

drifts135
07-21-2012, 01:30 PM
Trade for 1993 Lexus LS400 5 speed swapped, Coils, Varrstoens, welded, not beat up, sparco evo knocks? It is the one that was drifting at East Coast Bash.

Text Kyle at 703-606-5800.

iknowaghost
07-21-2012, 02:53 PM
Price for Seat with rails/mounts?

Price for coilovers?