Another s13 4 to 5 lug question......soory

[IchigoMae]

ok, i know the cheapest route is to get s14 hubs and spindles and the lca bolt thing. and you have to modify the s13 struts. but i just want to confirm if s14 struts will fit and solve everything. im sure some one mentioned that but is this true? thanks.

[mbmbmb23]

Fronts will fit, rears would be too long. You could buy individual struts from tirerack.com and get front S14 and rear S13....if you wanted. OR...you could put some sort of spacer shell over the S13 bolts inside the S14 bolt hole...and use S13 struts with the S14 spindles. I may do this, but I dont have anything yet for a spacer. If I cant find some sort of small metal tubing for this, I may even try to fill the S14 spindle holes with JB weld, let it harden...then drill them out to S13 spec.


-m

[uuninja]

I had a bushing made for for the s13 bolts in the s14 upright. It cost me $60 at a local machine shop.