can someone help me with this?

[BadazzSr20]

hey all,

i was looking on the web for some rims and how they fit and look. i found a car with what im looking for to the T!! the only problem is i cant get any info on them.

im posting it here to see if anyone here can figur out what rims they are and i know its a long shot but maybe a offset.

this is the offset i want cause there no fender rolling and the car is as stock as it can be. that offset is perfect!!

i dont want to roll the fenders at all and i would like to stay around a 15x8 all round or 16`s is the bigest. but this is what im looking for anyone know how i can get this on my car?

http://30.media.tumblr.com/tumblr_luqpd3reAy1r4oqb4o1_500.jpg


thanks all and sorry if im being noob:eek3:

[2.5T_/<ouki]

Pretty sure those fenders are rolled.
As far as pulled, i don't think they are, but most def rolled.

[Darren]

those rims have to be bigger than 16".. i'm guessing 17... the wheel fitment thread might be of some use to you....

[nissanfreak317]

Looks like a staggered fitment to me. Either 18/17 or 17/16.

Definitely check out the wheel fitment whore thread.

[BadazzSr20]

Ya been looking at the thread and i found a guy with some rims i would like and i can just powered coat them black. He gave all the specs that he had on them rims


If i am to copy him with all the specs he wrote down my car should look the same as his right? Or u think it wont match up for some reason.

Like these are the specs he has for his car
weld prostars (bling bling!)
front - 15x7" -13mm (+12 wheel & 25mm spacer due to spoke design = effective -13mm )
rear - 15x8" +25mm

205/60-15 up front, 235/60-15 in rear (they're BFG DR's, changing those out to 225/60-15 soon)

megan coils, still have another 2 inches to go front and rear, it will stay like this since its about perfect. might pick up a 10mm spacer in the rear once i downsize to 225's...


If i do exactly what he did my rims should turn out just like his car looks and high and fitment?? I even have the same exact car as him.

I just hate to spend all the money on these rims and my car turn out way diffrent then his.

[Darren]

Not sure why you want to copy someone, but there are always subtle differences between cars, bushing wear, previous damage that's been repaired, etc.

You won't know 100% until you do it, and then you may have to tweak it to make it look the way you want...

But copying his setup will definitely get you close.

[BadazzSr20]

I just called about these rims and there wanting a offset. Problem
Is i dont have one so i said give me them in 5.5backspacing and they said theres no 5.5bs with these rims only 4.5bs and 4.75 i think he said but i dont no

So now i got no clue at all what to do. Getting the right rims and spec for the setup i want is killin me i been at this now for
Months!!

[BadazzSr20]

Im looking at the wheel fitment thread and no one posts up backspacing. I hear 5.5backspacing weld rims look sick as hell!! But my question is are all the rims im looking at beed to be a 5.5 backspacing or just some rims?

What backspacing do i need to get for whaever rims i
Trying to buy. Thats the part i dont get everyone is talking about -13mm and +25 offsets but what about backspacing for them offsets your talking about?

[nissanfreak317]

Good sir. Please read these two threads before asking any more questions.

http://zilvia.net/f/tech-talk/166626-offset-101-dummies.html

http://zilvia.net/f/chat/129865-wheel-fitment-whore-thread-stretch-flush-no-specs-no-post.html

Thank you.

P.s. Most wheels are designated by offset, not backspacing. Both of which are severely affected by the overall width of the rim. There is no single answer.

[!Zar!]

So you went from wanting your car to sit on 17/18 x 9~ to sitting on 15x7?

Please reevaluate.

Edit: Just noticed OP's location.