PDA

View Full Version : bee*r 95 ka-t help


Gold Zenki
11-18-2011, 10:11 PM
hey guys Ive searched but only come up with dead links. i just bought a used one and honestly don't know what wire needs what. right out of the controller are 3 cables which i belive are the calibration ones white wire. brown wire and a gray wire they are just looped back in. the harness has a green,red,yellow, white, gray, black wires.... any help is appreciated flame on lol

Csomme
11-18-2011, 10:45 PM
Red wire: 12V+
Black wire: Earth
Yellow wire: RPM Signal
Green wire: Ignition signal.
4Cyl = Cut Grey Wire

White wire can be used for launch control.

http://attila.sdsu.edu/~mmikse/safc2wiring.jpg (http://attila.sdsu.edu/%7Emmikse/safc2wiring.jpg)


But really, when searching you sometimes have to pull information from multiple sources and piece it together yourself using common sense.

Gold Zenki
11-19-2011, 11:04 PM
dude thank you so much. i was trying to use google to translate the pdf lol. but u just made it so much sweeter thanks again man

Gold Zenki
11-19-2011, 11:05 PM
and is that diagram for an s14?

Csomme
11-21-2011, 03:26 PM
Its for a KA in general, the wires listed should be the same s13/s14, you don't have to worry, Your welcome man. haha, Sometimes shit can be frustrating and you just want a straight answer.

Gold Zenki
11-21-2011, 09:26 PM
Its for a KA in general, the wires listed should be the same s13/s14, you don't have to worry, Your welcome man. haha, Sometimes shit can be frustrating and you just want a straight answer.
:kiss: :hsdance: