What would you pay for this?? Whats it worth for parts??

[300ZXttZMAN]

S13 SR powered all i know about it is whats in the pictures and the information given. (https://www.iaai.com/Vehicles/VehicleDetails.aspx?auctionID=0&itemID=11829243&RowNumber=0)

It has an SR

What yall think $1k?? It all depends on if anyone knows about the SR thats at the auction or looking at it online.
__________________________________________________ _

Also I wonder what this is worth???

Kouki just curious (https://www.iaai.com/Vehicles/VehicleDetails.aspx?auctionID=0&itemID=11476230&RowNumber=19)

I am in the middle of building my Z so i wont be buying the kouki but just curious to see what yall think its worth. A white one sold today for 2,600 it needed headlights a bumper and RH fender It still ran and drove But it was clean and unmolested.

But I will more than likely buy the S13 because i can go get it with my rollback...

Thanks
-ZMan

[pacotaco345]

I wouldn't pay more than 200 for that s13.. if you look at the block its obviously cracked. And thats the only "valuable" thing in that car that isn't FUBAR'd

[rumsawatti]

The s13..i wouldnt buy it...not for 1k not for 500$ even though it has an SR, it was hit pretty badly, you dont really know what went wrong or if anything was hurt on the engine, its kind of a blind buy...

The Kouki is not bad but i think 5k is too much, you can pick one up for a grand or so more thats in much better condition and cost less to fix...id say 3k on the kouki :)

[Darren]

S13: rear strut tower bar is maybe worth $25... that's about what i'd pay for it, it'll cost you more to get rid of it then it's worth in parts... as pacotaco said, the only thing of "value" is the motor, and i wouldn't touch anything that's been in a head on like that

S14: maybe 2,000 ... but that would be assuming i'd do all my own bodywork, might not be worth it for someone who has to put it through a shop... nothing special, it's not even 5sp

[300ZXttZMAN]

S13: rear strut tower bar is maybe worth $25... that's about what i'd pay for it, it'll cost you more to get rid of it then it's worth in parts... as pacotaco said, the only thing of "value" is the motor, and i wouldn't touch anything that's been in a head on like that

S14: maybe 2,000 ... but that would be assuming i'd do all my own bodywork, might not be worth it for someone who has to put it through a shop... nothing special, it's not even 5sp

Well first i forgot to mention that My dad and I own and run a salvage yard so when we crush i will actually get paid TOP DOLLAR for the car it will crush out for Aprox $350

Sooo.. Yea most people have to pay to get rid of a parts car due to fuel, time, wear by hauling it on a trailer and such.. Not me I will actually get paid top dollar simply because the volume of weight when we crush, we crush about 800 cars/trucks/suv's twice a year. The crusher company comes to us and they do everything..

I guess yall just don't see it like me cause yall aren't in the buisiness. :hsdance:

I would obviously swap it haha fuck auto trannys that takes the fun out of it. Plus its so simple to swap trannys on the S14


LOL so now with that cleared up what would the motor/trans be worth if its all in good shape?? A little less than JDM price?? Or more if i can prove that it still runs

Here is the white kouki that sold for $2,600 (https://www.iaai.com/Vehicles/VehicleDetails.aspx?auctionID=11063875&itemID=11840669&RowNumber=13)

[NoPistons!]

S13 is scrap/junk.

S14 isn't far behind. $1500 MAX.

[300ZXttZMAN]

s13 is scrap/junk.

S14 isn't far behind. $1500 max.


lol....................

[rumsawatti]

^however, if you buy it for 1K to scrap it back for $300 you still lose...youd have to make back your money on the engine alone and you may quite possibly have to put money into that to fix it up cause like everyone said the car was crashed pretty badly..

[300ZXttZMAN]

^however, if you buy it for 1K to scrap it back for $300 you still lose...youd have to make back your money on the engine alone and you may quite possibly have to put money into that to fix it up cause like everyone said the car was crashed pretty badly..

Yea but chances are the motor mounts broke and the motor was just able to move around.. I figure the highest ill go is 850 simply cause my buddie needs the motor if motor is no good then the pistons are.. Obviously the head is good... And would if it has upgraded parts such as injectors turbo ect...

[rumsawatti]

Well, seems like yougot it all figured out :D go for it!

[ILoveMyRHS13]

I wouldn't pay anything for that pile of scrap. The motor is probably fucked.

[300ZXttZMAN]

Its far away still waiting on the insurance company to release it haha

ILL update once it gets an auction date then ill get an update to say how the auction went

[Melonburst]

S13 is done, other than the rear 5 Lugs it would cost more to tow out of there than what youll get out of it. I wouldn't get my hopes up on the block.. it is aluminum made. If it was a stronger iron block I might take a chance on it if I got to inspect it in person. Send it to the crusher.

[pacotaco345]

Yea but chances are the motor mounts broke and the motor was just able to move around.. I figure the highest ill go is 850 simply cause my buddie needs the motor if motor is no good then the pistons are.. Obviously the head is good... And would if it has upgraded parts such as injectors turbo ect...

Resized and crop'd the motor pic so you can see (somewhat) clearly now... The head is obviously trashed, you can tell that the front of it is fractured and the valve cover is obviously broken too. If the crank pulley got shoved anywhere near as much as the head then the crank has proly been shoved back an inch or two, destroying the rods/pistons/whole bottom end.

http://i43.photobucket.com/albums/e392/pacotaco345/8901295_10_I.jpg

[300ZXttZMAN]

We will see valve cover is def cracked but that doesn't mean the head is no good.

[pacotaco345]

We will see valve cover is def cracked but that doesn't mean the head is no good.

http://i43.photobucket.com/albums/e392/pacotaco345/8901295_10_I-1.jpg

Circled where the whole passenger side of the head has been caved in.. and drew lines over a few of the cracks...

[rumsawatti]

lol i think we are all missing a question here too...WTF happeend to this thing anyway? looks like it got run over by an 18 wheeler! so sad...

[300ZXttZMAN]

Oooo Yea i see it now your right oh well ill still buy it if i can get it cheap enough...

[300ZXttZMAN]

It got in a wreck then rolled over :(