KA-E/KA-DE lots of parts, harnesses, sensors etc...

[itsmejeremy]

Making the switch to dual cam.
Located in Glendora, CA 91741.

(626) 678-6984

Hit me up with questions/offers and whatnot.
Will ship AT BUYERS EXPENSE.

1989 SINGLE CAM KA24E complete part out.
Whatever you need!!!
sensors, injectors, harness, ecu, power steering, etc...
ALL PARTS CAME OFF OF A RUNNING VEHICLE.
MOTOR PART OUT ONLY!

KA24E head I'm pretty sure it's a little warped... may need to be resurfaced. :down:
^^ Willing to part out i.e. cam, lifters, valves, springs and all that jazz.

KA24E complete block ~160k mi. WAS RUNNING. RAN HARD. $50
^^ Also willing to part out i.e. crank, timing components, pulley and all that jazz.

Hicas power steering pump w/ bracket, high pressure lines and uncut sensor.

Hicas power steering reservoir

SOHC High pressure A/C lines. $25

SOHC EGR valve/pipe. $15

(1) Upper Harness for a KA24DE (DUAL CAM) only the consult clip is cut off of it. $25 (SOLD)
^^Still has all connections and dash connector.

(1) DOHC Power Steering Reservoir. $10 (SOLD)

KA24E SOHC UNCUT upper harness no dash connector. (depinned the wires from connector.) $45 (SOLD)

SOHC dash cluster. (SOLD)

KA starter. $30
http://i11.photobucket.com/albums/a192/I_like_my_bike/KAstarter.jpg

Stock exhaust catalytic, piping and muffler. (SOLD)

SOHC exhaust manifold & downpipe. (SOLD)

SOHC Exhaust maifold O2 sensor. $10
http://i11.photobucket.com/albums/a192/I_like_my_bike/O2sensorexhaustmanifold.jpg

SOHC power steering pump.

SOHC power steering bracket.
http://i11.photobucket.com/albums/a192/I_like_my_bike/powersteeringbracket.jpg

SOHC power steering reservoir. $10
http://i11.photobucket.com/albums/a192/I_like_my_bike/SOHCpowersteeringreservoir.jpg

(1) MAF sensor w/ top of airbox. (SOLD)

Complete SOHC intake. (SOLD)

SOHC Throttle body.

(4) SOHC 270cc Injectors $30 (SOLD)

SOHC fuel pressure regulator (SOLD)

SOHC fuel rail. $10
http://i11.photobucket.com/albums/a192/I_like_my_bike/SOHCfuelrail.jpg

SOHC power steering reservoir. $10
http://i11.photobucket.com/albums/a192/I_like_my_bike/SOHCpowersteeringreservoir.jpg

SOHC throttle cable. $10
http://i11.photobucket.com/albums/a192/I_like_my_bike/SOHCthrottlecable.jpg

SOHC Ignitor. $20
http://i11.photobucket.com/albums/a192/I_like_my_bike/SOHCignitioncoil.jpg

I have 3 SOHC ECUs:
(2) AUTOMATIC. $25
(1) MANUAL. $35
http://i11.photobucket.com/albums/a192/I_like_my_bike/ECUs.jpg

Torque Converter. $20
http://i11.photobucket.com/albums/a192/I_like_my_bike/torqueconverter.jpg

Automatic flywheel. $5
http://i11.photobucket.com/albums/a192/I_like_my_bike/lightflywheel.jpg

Backing Plate. $5
http://i11.photobucket.com/albums/a192/I_like_my_bike/backingplate.jpg

http://i11.photobucket.com/albums/a192/I_like_my_bike/jeremysmotor.jpg

[ztreetz87]

do u still have the dohc power steering reservoir

[479]

still have some rods?

if so how much shipped
72908

[pacificcoastautobody]

pm sent.......

[tapdeznutz]

what is the upper harness for the KA24E??

[lilbikesrfun]

Bump for this dude!

[tapdeznutz]

pm me if you still have the sohc ecu the one with the "14" on it. thankx

[nissanhoe4show]

need SOHC ps set up.
pump
reserv.
lines
bracket

[tapdeznutz]

sent you a message, bump

[diamondhatch]

intrested in dohc harness...

[xBtony]

price on head?

[1slicktwo4oh]

Do you have a sohc 5spd tps???pm me price

[starplatnumm]

MAF. might be too late. if you still have it?

[mikevskater]

Still have the motor?

[lilbikesrfun]

Still have the motor? Yes.. He does. I literally saw it just yesterday.

[itsmejeremy]

I apologize for all of the delayed responses. I haven't been receiving email notifications on this thread.

price on head?

$15 sound good?

Do you have a sohc 5spd tps???pm me price

Yes I do. How does $15 sound?

MAF. might be too late. if you still have it?

I believe I already sold it, but I can check later today and get back to you with an answer and price.

Still have the motor?

I still have the complete block. Just needs the head and exhaust manifold.

intrested in dohc harness...

I still have it here. $25 let me know what you think.

Yes.. He does. I literally saw it just yesterday.

Thank you Steve

[Landspd]

Do you have the EGR-BPT valve, and do you know if its still good if so?

[itsmejeremy]

Do you have the EGR-BPT valve, and do you know if its still good if so?

Yeah, I still have the egr-bpt valve setup and it's still in good, working condition. How does $20 sound?

[Landspd]

Yeah, I still have the egr-bpt valve setup and it's still in good, working condition. How does $20 sound?

Sounds good. Just want to make sure though, in the picture it looks pretty similar to the Dual Cam BPT valve, do you know if it will work with the Dual Cam? I think it should just need the "L" shape vacuum ports up top and one vacuum port on the bottom side.

[itsmejeremy]

Sounds good. Just want to make sure though, in the picture it looks pretty similar to the Dual Cam BPT valve, do you know if it will work with the Dual Cam? I think it should just need the "L" shape vacuum ports up top and one vacuum port on the bottom side.

To be honest, I'm not exactly sure if it'll work on the dual cam.

[Landspd]

To be honest, I'm not exactly sure if it'll work on the dual cam.

According to the Microfiche on West Covina Nissan Parts website, they're the same. Can I check it out tonight, and if it looks the same, take it off your hands?

[itsmejeremy]

According to the Microfiche on West Covina Nissan Parts website, they're the same. Can I check it out tonight, and if it looks the same, take it off your hands?

Oh ok. Cool. Yeah, I have no problem with that. I get home from work at 5, so anytime after that is good for me. Text me for the address. 6266786984