PDA

View Full Version : my uk 98 s14a sr20det uras kitted


Burch1988
11-14-2011, 03:53 PM
hi guys i thought i would add a biuld up thread im from the uk and have been modding my 14a for 6 ,months now i dont know if im in the right bit of the forum but hey ,

Engine/Exhaust:

.Apexi Power Intake filter and adaptor
.Apex Performance cold air enclosure
.garret gt28rs turbo refurbed (s15 import)
.hks upgraded actuator
.apexi oil filter relocation kit
.mocal oil cooler
.apex front mount intercooler
.apex fmic hard pipes (huge)
.3"turbo elbow (heat wrapped )
.3"down pipe (heat wrapped )
.apex 3"cat back with a 4.5" tip(heat wrapped )
.Apex 3" decat (heat wrapped )
.apexi avcr boost controller
.hks 60mm boost gauge
.apexi slimline turbo timer
.walbro 255 fuel pump
.sfs coolant hoses
.act stage 1 clutch kit
.fidanza lightwaight flywheel
.hks intercooler pipe couplers
.samco blue silicone hoses
.anodised blue oil cap
.t1r rad cap 1.1
.efl stainless cooling panel

EXTERIOR,
.genuine chargespeed vented front wings
.genuine uras front bumper
.genuine uras sideskirts
.genuine uras rear bumper
.rear wiper delete
.rear spoiler delete
.rear antenna delete
.full car respray in audi ibis white

Suspension;

.Apex coilovers with top camber adjusters
.Driftworks rear camber arms
.Driftworks rear traction rods
.Driftworks rear toe rods
.Driftworks front tension rods
.Apex Performance front strut brace
.super pro bushes all over

Brakes;

.EBC front disks
.EBC front pads
.EBC rear discs
.EBC rear pads
.Goodridhe braided hoses
.skyline r33 gtr front calipers (pink)
25mm cusco rear spacers(pink)
20mm cusco front spacers (pink)

Wheels/tyres;

.18x8.5 OZ Superturismos ( refurbed in white with pink splashes )
.Toyo proxies all round

parts yet to fit ,



http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020891.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020892.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020893.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020894.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020895.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020898.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020899.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020901.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020905.jpg

And now after coilovers and the refurbed wheels

http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020912.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020914.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020915.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020916.jpg

Then i got set on rust prevention.

http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020908.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020909.jpg

More to come, i have got a front mount intercooler and piping, also a 3" turbo manifold, elbow and downpipe coming. also a 3"catback wich shoudl be here anyday now


got my turbo ebow delivered today and as the sun was out , i decided t tackle sorting out some camber .heres some pictures of m progress today

the elbow
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020928.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020929.jpg

engine bay after a clean and some fancy bits i had lying around
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020919.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020920.jpg

the front end with a little bit of camber and a stupid sticker lol
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020922.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020924.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020926.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020924.jpg


im realy pleased with the progress so far ,i cant wait to fit the complete exhaust and intercooler next then off to garage d for a set up


heres the front mount intercooler
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020953.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020954.jpg

and my new exhaust witch i heat wrapped .
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020955.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020959.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020958.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020970.jpg
it isnt the best fit as its touching the rear sub frame ,also blowing so i will have to sort it out

Burch1988
11-14-2011, 03:54 PM
and a few random ones

http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020960.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020962.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020963.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020974.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020975.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020968.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020966.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020965.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030022.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030020.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030019.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030023.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030028.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030030.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030031.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030025.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030026.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030033.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030034.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030036.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/adcd.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030168.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030169.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030201.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030205.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030206.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030207.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030209.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030210.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030211.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030212.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030213.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030271.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030272.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030276.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030277.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030278.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030285.jpg

Burch1988
11-14-2011, 03:55 PM
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030282.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/297239_10150307243092307_563542306_8486131_5350504 75_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/307436_10150307243217307_563542306_8486132_1232895 007_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/308804_10150307242997307_563542306_8486130_6067968 81_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/310637_10150307243627307_563542306_8486137_2131671 526_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/313414_10150307243312307_563542306_8486133_1701034 219_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/315089_10150307243467307_563542306_8486135_1177029 597_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/315325_10150307243677307_563542306_8486138_2708932 77_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/320091_10150307243552307_563542306_8486136_1119567 391_n.jpg
right went the tonight to fit my windscreen in ,and i must say they have done qwite well apart from it bieng 7 weeks now ,,,,, heres some progress piccs sorry for the qality still using my iphone 3gs until my 4s arrives .

http://i682.photobucket.com/albums/vv188/mad-corsa-b/381268_10150341546412307_563542306_8695775_9959470 94_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/380535_10150341547292307_563542306_8695778_9458859 47_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/386362_10150341548172307_563542306_8695781_5981748 12_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/393067_10150341548677307_563542306_8695784_5512290 68_n.jpg

it needs mopping and then bits fitted back on then all done wahoo
.14a throttle body that had previuosly been polished
i gave it a full polish inside also the outside a little polish nothing too major also had the throttle bracket anodised purpple
http://i682.photobucket.com/albums/vv188/mad-corsa-b/373934_10150350384177307_563542306_8748047_1872871 687_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/374828_10150350385437307_563542306_8748057_2076088 20_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/166952_10150350383762307_563542306_8748044_2906211 87_n.jpg

.255 walbro fuel pump
http://i682.photobucket.com/albums/vv188/mad-corsa-b/306377_10150347822927307_563542306_8735050_1323896 173_n.jpg

.oil cooler and relocation kit unsure of brand but looks to be made very well
gave it a clean up and cleaned inside and anodised the bolts and bracket
http://i682.photobucket.com/albums/vv188/mad-corsa-b/320686_10150344681812307_563542306_8712939_1344774 186_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/383838_10150344693957307_563542306_8712959_2086412 726_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/309818_10150347824042307_563542306_8735061_1083062 796_n.jpg

.bosch cooler plugs 7
same picc as before

.efl cooling panel it arrived bent from post office so i managed to straighten it out didnt turn out to badly then gave it a polish and some fresh stickers
before
http://i682.photobucket.com/albums/vv188/mad-corsa-b/391169_10150349094902307_563542306_8742654_1759097 509_n.jpg

after
http://i682.photobucket.com/albums/vv188/mad-corsa-b/166958_10150350383262307_563542306_8748040_1234666 883_n.jpg

Crondy
11-17-2011, 11:21 AM
pretty damn good build, more fond of before looks though.

anthonyr sil8ty
11-17-2011, 12:19 PM
anymore pics of the evox?

Burch1988
11-17-2011, 12:41 PM
Right today after cleaning it inside and out fitted my pink intercollegiate hot pipe and spacers also my oz wheels
Still have a lot of work to do like get the head lights in line

Here's some pics

http://i682.photobucket.com/albums/vv188/mad-corsa-b/Snapbucket/22D0E1F0.jpg

http://i682.photobucket.com/albums/vv188/mad-corsa-b/Snapbucket/32DAAD13.jpg

http://i682.photobucket.com/albums/vv188/mad-corsa-b/Snapbucket/5E5DC663.jpg

http://i682.photobucket.com/albums/vv188/mad-corsa-b/Snapbucket/7CB5CF5A.jpg


http://i682.photobucket.com/albums/vv188/mad-corsa-b/Snapbucket/7C3DF492.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/Snapbucket/B2D69B28.jpg

Burch1988
11-17-2011, 12:47 PM
Here's the evo some of at some shows and some random

http://i682.photobucket.com/albums/vv188/mad-corsa-b/315048_10150793648860433_747825432_20694697_107823 7_n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/268746_10150225847847307_563542306_7780219_7254948 _n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1030177-1.jpg

http://i682.photobucket.com/albums/vv188/mad-corsa-b/292850_10150273370487307_563542306_8267572_1732634 _n.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/P1020905.jpg

anthonyr sil8ty
11-17-2011, 08:05 PM
Both cars are lookin good

Burch1988
11-18-2011, 02:16 AM
Both cars are lookin good

Thanks dude

ncs14
11-18-2011, 05:17 PM
those wheels are hidious

Walperstyle
11-19-2011, 04:20 AM
I got scared when I saw the used aero, pre painted. Thank you for doing the whole body shop routine.

Also not a fan of wheels, but its your car, not mine

Burch1988
11-19-2011, 07:25 AM
I'm not loving the wheels eitha but better than oem

Burch1988
01-22-2012, 02:32 AM
hey guys i thought i would upload some pics that i took last week when i had my mot done ,let me know what you think

http://i682.photobucket.com/albums/vv188/mad-corsa-b/Snapbucket/BEA8A74D.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/Snapbucket/6D71E1AE.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/Snapbucket/63C555AE.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/Snapbucket/87461B8F.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/Snapbucket/42639E24.jpg

Dingus
02-04-2012, 09:13 AM
Car looks absolutely brilliant!

Looking to do something similar with the s14 I just picked up, this will be a great guide.

furr
02-06-2012, 03:21 PM
wow, that looks great dude! i was thinking about this kit, now i am on the hunt.. good stuff

blockedwizard
02-11-2012, 06:29 PM
real nice, awsome evo too!

Burch1988
02-12-2012, 04:14 AM
Car looks absolutely brilliant!

Looking to do something similar with the s14 I just picked up, this will be a great guide.

Thanks buddy the car is always changing and I've just sold the rota torques in bronze as they were weak size so now I have gone for rota torques 18x9.5 et20 there the concave ones
Also the genuine uras kit I may take off and fit genuine jdm Kouki kit

wow, that looks great dude! i was thinking about this kit, now i am on the hunt.. good stuff

Thanks buddy they are IMO the best s14a aftermarket kit out there

real nice, awsome evo too!

Thanks dude

up to date specc also a few nice shots from saturday night at southend beach front and what fun it was on the drive back to reading ha in the snow notttttt

ENGINE.
.Apexi Power Intake filter and adaptor
.Apexi cold air enclosure (rare)
.garret gt28rs s15 turbo
.3"custom stainless steel intake pipe
.apex front mount intercooler
.apex fmic hard pipes
3"turbo elbow (heat wrapped
3"down pipe (heat wrapped
apex 3"cat back with a 4.5" tip(heat wrapped
.Apex 3" decat (heat wrapped
.apexi avcr boost controller
.hd chip stage 1
.hks 60mm boost gauge
.apexi slimline turbo timer
.walbro 255 fuel pump
.s15 injectors
.sfs coolant hoses
.act stage 1 clutch kit
.fidanza lightwaight flywheel
.hks intercooler pipe couplers
.sfs white coolant
.pink breather hoses
.hks anodised blue oil cap
.t1r rad cap 1.1
.efl stainless cooling panel
.fuchs oil
.hks oil filter
EXTERIOR,
.genuine chargespeed vented front wings
.genuine uras front bumper
.genuine uras sideskirts
.genuine uras rear bumper
.rear wiper delete
.rear spoiler delete
.rear antenna delete
.full car respray in audi ibis white
.trs green tow strap front
INTERIOR,SOUND
.tomei titanium gear knob(rare)
.customgear gaitor
.hks 60mm boost gauge
.apexi avcr boost controller
.oem front leather seats
.stripped rear seats( will enclude in sale)
.lpine ipod cd usb
.kenwood front door speakers
.alpine rear speakers
.alpine amp
.jl audio sub

Suspension;
.Apex gen 2 coilovers with top camber adjusters
.Driftworks rear camber arms
.Driftworks rear traction rods
.Driftworks rear toe rods
.Driftworks front tension rods
.Apex Performance front strut brace
.super pro bushes all over
.apex front top strut brace
Brakes
.Black diamond grooved front disks
.EBC front pads
.EBC rear discs
.EBC rear pads
.Goodridhe braided hoses
.brembo 4 pot front calipers refurbed
.25mm cusco front spacers (pink)

Wheels/tyres
.17x9 et 30 bronze rota torques
.Toyo proxies 4's front and back
.rays anodised wheels nut in red enc rays locking wheel nuts


http://i682.photobucket.com/albums/vv188/mad-corsa-b/DSC_1005.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/DSC_1004.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/DSC_1002.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/DSC_1001.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/DSC_0999.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/DSC_1000.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/DSC_0997.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/DSC_1014.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/DSC_1013.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/DSC_1010.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/DSC_1009.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/DSC_1007.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/DSC_1006.jpg
http://i682.photobucket.com/albums/vv188/mad-corsa-b/DSC_1011.jpg

driftsucky
02-15-2012, 01:19 PM
looking good. like these new wheels better than the OZ's too.

Burch1988
02-15-2012, 01:22 PM
looking good. like these new wheels better than the OZ's too.

Thanks dude , also big update bronze rota torques flat faced 17x8 et30 sold now I have black rota torque concave 18x9.5 et12
Also I'm going to be removing the bodykit to eitha replace with Oem jdm Kouki or choose another not so aggressive bodykit

Pinggg
02-15-2012, 09:14 PM
Moar low!!!!


looks good otherwise.

Burch1988
02-16-2012, 12:25 AM
Moar low!!!!


looks good otherwise.

That's the idea , the kit restricts how low I can go as here in England we have speed humps not good