Godspeed Project S13 / S14 Massive Angle Steering Kit

[Fatboy Garage]

http://www.godspeedproject.com/shop/images/suspension/s14angle.jpg

These are going for $320 picked up or $350 Shipped to lower 48 states (California customers add 9.25% to shipped price.)



The Godspeed Project massive angle kit is a direct fit kit without any modification to your stock oem knuckle piece. This massive angle kit is a ONE PIECE MADE kit, unlike most kits out there that are cut and weld with the oem steering knuckle. This is made by an oem manufacturer with oem quality material. Godspeed Project massive angle kit will give you more extreme angle on your S13, S14, or S15 without modifying the front lower control arm. The Massive angle steering kit will stop at exactly 55 degrees , if you modify the lower control arm bump stop this angle kit will give you additional 5 to 10 more degree (Depending on how you modified your bump stop)


We are confident in our product that we are offering a limited LIFETIME WARRANTY.


OEM knuckle vs. Godspeed Knuckle

Leading wheel: OEM is 38 degrees vs. Godspeed is 56 degrees

Trailing wheel: OEM is 30 degrees vs. Godspeed is 46 degrees

Turning circle (curb-to-curb): OEM is 30.1 feet vs. Godspeed is 23 feet

Lock-to-Lock: OEM is 3 turns vs. Godspeed is 2.6 turns


***Note: For S13 240sx customers this must be use with a s14 240sx wheel hub.

Also included is (2) 7mm spacers to go into the inner tie rod to be used with this kit****



http://www.godspeedproject.com/shop/images/suspension/s14angle_2.jpg

http://www.godspeedproject.com/shop/images/suspension/s14angle_3.jpg
http://www.godspeedproject.com/shop/images/suspension/s14angle_5.jpg

[BloodBath240]

I dig them...they would go nicely with my already Godspeed Coils and Arms.

[7jpat]

dose it have to be s14 hub what about Ichiba hubs

[k0013]

the diameter of the axle stub is different between the 13 and 14 hubs and they seam to have gone with the s14 hub for a core for these.

[DoobieS13]

$380 on here. $450 on your site???

[JDM_Tuner]

Do they fit both s13 and s14 lower ball joints? Isnt the s14 ballpoint thinner, hence you'd need different knuckles for each model?

Anyways they Look good and the lifetime warranty helps the rep of These even tho it is Godspeed stuff.

[chiboy002]

$380 on here. $450 on your site???
zilvia pricing dude

[iLagX]

any pictures installed? and actual product?

[sharpe_corners]

pics plz.......

[96Turbo]

Do they fit both s13 and s14 lower ball joints? Isnt the s14 ballpoint thinner, hence you'd need different knuckles for each model?

Anyways they Look good and the lifetime warranty helps the rep of These even tho it is Godspeed stuff.

Same question

Would you recommend just switching to an S14 FLCA with the added benefit of moar camberz?

[Fatboy Garage]

As far pictures go, there are more pictures on our website;

NISSAN 240SX S13 S14 89-94 95-98 MASSIVE ANGLE STEERING KIT [SK-001] - $450.00 : GodSpeed Project, The Art of Performance (http://www.godspeedproject.com/shop/index.php?main_page=product_info&cPath=5&products_id=1546)



Same question

Would you recommend just switching to an S14 FLCA with the added benefit of moar camberz?


You can switch to a S14 FLCA but its not necessary. On the knuckle itself you can actually bore out the hole just a tad bit to fit an S13 FLCA the size difference is not that big.

[PeaceOnesxWai]

Yay, cant wait to try them!

[travypoo]

s14 ball joint taper is different. if you get s14 knuckles on a s13 you need s14 balljoints in your lcas or s14 lcas. and the coilover bolts are 14mm on s14 vs 12mm on s13. you will need to either drill out your coilover holes to bolt up the knuckle or get these:

Agency Power AP240-500 5 Lug Shock Mount Spacers 240SX S13 S14 (http://www.frsport.com/Agency-Power-AP240-500-5-Lug-Shock-Mount-Spacers-240SX-S13-S14_p_14123.html)

[Chris28]

No roll center correction and I'd have to get s14 hubs, ball joints, and coilover bolt spacers?

No thanks, I'll still order from PSM.

[Fatboy Garage]

In stock ready to ship!

[Fatboy Garage]

This is still available.

[Fatboy Garage]

still in stock!

[Fatboy Garage]

These are still available!

[Fatboy Garage]

50% off sale going on today, last day.


#/f/advertiser-announcements-feedback/420917-godspeed-project-black-friday-special-50-off-msrp.html (#/f/advertiser-announcements-feedback/420917-godspeed-project-black-friday-special-50-off-msrp.html)

[Fatboy Garage]

These are still available!

[7jpat]

wish it was still 50% off and the suspension deal to :(

[Fatboy Garage]

Still have a few of these available!

[Fatboy Garage]

Still have a few sets left.

[Fatboy Garage]

Still have these available!

[Fatboy Garage]

In stock ready to ship out!

[Fatboy Garage]

Still in stock ready to ship out!

[Fatboy Garage]

in stock ready to go!

[Fatboy Garage]

Still have these available!

[Fatboy Garage]

Still have these available!

[Fatboy Garage]

in stock ready to go!

[Fatboy Garage]

These are still available!

[Fatboy Garage]

Knuckles are still available!

[Fatboy Garage]

in stock ready to go!

[Fatboy Garage]

I still have these in stock!

[Fatboy Garage]

Still have these in stock!

[Fatboy Garage]

In stock ready to leave!

[Fatboy Garage]

I still have these available for pick-up or to be shipped out!

[Fatboy Garage]

This is still available to order!

[Fatboy Garage]

Still have these available to order.

[Fatboy Garage]

Offer is still valid guys!

[Fatboy Garage]

Still have these available to order!

[Fatboy Garage]

you will go BACKWARDS with these knuckles!

[Fatboy Garage]

bump for crazy sale pricing!

[Fatboy Garage]

Offer is still valid!!!

[Fatboy Garage]

BUMP for Awesome prices!!!

[Fatboy Garage]

friday bump!!!!

[Fatboy Garage]

Monday bump!

[Fatboy Garage]

Tuesday bumper cars!!!

[240rb20]

Do these help correctly front end geometry on really low cars or just increase steering?

[Fatboy Garage]

In theory geometry is WAY different with every car. Every car is lower than others, every car runs a different tie rod as far as brands of the rods go and geometry can change drastically. Depending on how you set up, it COULD improved geometry but I don't see how you can make it worse. It DOES increase steering angle. There is truly not that many knuckles out there that can improve geometry. Only one I've heard of personally is the driftworks knuckles. - Chris

BUMP!

[Fatboy Garage]

Friday BUMP! Friday the 13th!

Like our fan page! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

Tuesday bumper cars!

[Fatboy Garage]

Happy Hump day!

[Fatboy Garage]

Thursday bump! Like our fan page Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject) :)

[Fatboy Garage]

Happy Hump Day! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

Thursday Bump!!!Like our facebook page! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)!!

[Fatboy Garage]

Thank god its friday!!! Bump!

[Fatboy Garage]

MONDAY BUMP! YEE! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

Tuesday Bump! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

February!!! www.facebook.com/godspeedproject (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

Monday bump! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

Why trade in your stock knuckles when you can just buy knuckles that are built already!

[Fatboy Garage]

TGIF! Bump!

[Fatboy Garage]

Happy Hump day!!!

[Fatboy Garage]

Happy Hump Day!

[Fatboy Garage]

Happy Hump Day!! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

Monday bump! Like our page!!! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

This is the most legit way to get knuckles. One Piece > Cut and Welded.

[Fatboy Garage]

Happy Hump Day! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject)

[Fatboy Garage]

Happy Tuesday Bump! Check out our fan page!!! Godspeed Project - Automotive - El Monte, CA | Facebook (http://www.facebook.com/godspeedproject) :)

[Fatboy Garage]

First post updated with new MAY SPECIAL pricing!

[Fatboy Garage]

Bump for the week!