S13 part out

[drifted240sx]

I just finished ripping apart my whole parts car. So here's what I got left over...

http://farm7.static.flickr.com/6045/6320118062_cff9837c38_b.jpg
http://farm7.static.flickr.com/6117/6319595193_0fd2babbfb_b.jpg
http://farm7.static.flickr.com/6103/6319592315_b9431a0825_b.jpg

1 set of power mirrors, good mirrors with the plugs-$20

http://farm7.static.flickr.com/6054/6319588791_8a46f48e63_b.jpg

Passenger's side fender extension, the bracket broke off-$old

http://farm7.static.flickr.com/6228/6319583579_8ea7a3033f_b.jpg
http://farm7.static.flickr.com/6035/6319585285_eb602dfe56_b.jpg

DOHC AC compressor-$25

http://farm7.static.flickr.com/6238/6320100578_7ed21edbbe_b.jpg
http://farm7.static.flickr.com/6211/6319569389_68bc320bc5_b.jpg

Black coupe trunk, its got a small dent about 4 inches away from dead center, all the way in the front-$45

http://farm7.static.flickr.com/6095/6319540245_82134bf427_b.jpg
http://farm7.static.flickr.com/6038/6320061328_cac2535d83_b.jpg
http://farm7.static.flickr.com/6054/6320036344_bcf6576421_b.jpg
http://farm7.static.flickr.com/6035/6320037950_6373a18592_b.jpg

Set of black doors, no panels, but does have the glass and power window regulator. As you can see the drivers door as a dent in it and so does the passneger's side door. The passenger's side should be an easy fix-$90 for the set, or $50 for one

http://farm7.static.flickr.com/6106/6319566199_d9472f4384_b.jpg
http://farm7.static.flickr.com/6218/6320083284_a3ce051108_b.jpg
http://farm7.static.flickr.com/6219/6319558829_f4bf270ba5_b.jpg
http://farm7.static.flickr.com/6053/6319561573_3f03315e94_b.jpg

Power door panels, comes with all the trim, handle trim and power window switch trim for the driver's door was just on the ground- $30 for the pair, $20 for one

http://farm7.static.flickr.com/6117/6320033810_fa69aeeef4_b.jpg

Door sill panels-$10 for the set, or $6 ea.
Trim piece that goes between the quarter glass and door glass-$10 for the set or $6 ea.

http://farm7.static.flickr.com/6112/6320098632_eba73f7072_b.jpg

HUD projector and the cap- $7

http://farm7.static.flickr.com/6110/6319551745_c9df4fe505_b.jpg
http://farm7.static.flickr.com/6046/6320067418_2d2e93e791_b.jpg

KADE auto tranny, unknown condition, 213k- $45

[drifted240sx]

Bump, I also have a digital cluster with the same amount of miles as the transmission, a set of clean coupe tail lights, the valence below the coupe tail lights, a hud dash with a small round crack up top/something was screwed into the side of it (you can barely see the holes when installed, I didn't notice the holes till it was out),2 stock front struts, 1 stock rear strut.

Make some offers on this stuff, it's all o.b.o. and I'm willing to ship the smaller stuff.

[savages13]

Have a kade engine harness?

[drifted240sx]

Have a kade engine harness?

Yes, I do, I'll pm you with details

[onepiece]

i need the door panels an possibly the mirrors

[drifted240sx]

Still got the door panels and mirrors, wiring harness was sold

[two40guy]

hud cluster work? ill take it if it does with harness

[drifted240sx]

Yes it does work, but unfortunately the dash harness went with the car to the scrapyard.

[khon240sx]

do you have these pipes?
http://img443.imageshack.us/img443/1521/1001570bc2.jpg

[drifted240sx]

Unfortunately I had to use those on my car. Sorry!

[itz matthew xP]

do you still have the trunk for sale?? if so where in ma are you located at? thanks

[tommytwo40hands]

hey do you have the (passenger) automatic window button for the drivers side?

[drifted240sx]

do you still have the trunk for sale?? if so where in ma are you located at? thanks

The trunk is still for sale, I'll pm you with details.

hey do you have the (passenger) automatic window button for the drivers side?

Yes, I do but its still stuck in the trim piece for the door panel.

[itz matthew xP]

cool let me know asap i'm in the neighboring state, i wanna pick it up before i head back to ny thanks

[emericanz]

if only u were closer =/ GLWS!

[tommytwo40hands]

The trunk is still for sale, I'll pm you with details.



Yes, I do but its still stuck in the trim piece for the door panel.

they pop out pretty easily, would you want to sell it seperately??..i'll give you like 5 bucks through paypal if you just stick it in an envelope and send it to me..just make sure that if you do take it out that it doesn't crack or break on the bottom side.