s14 getting no power to ignition

[jlmillionaire]

After recently getting my car back from a shop, the car would not start, but would have power (http://zilvia.net/f/#) to the ignition. I then went to remove the 100 amp fuse in the fuse panel in the engine bay, broke it - the legs were stuck - and then I removed the box that the fuse was in. I then disconnected the wires that were grounded to the fuses, 100 amp, etc. and I grounded the wires back, but I forgot how I took them off so I grounded them wherever. Now, I am not getting power to the ignition. This is all a result of jumping the battery and the two cables coming off the battery and touching each other, causing the battery to fry and other problems. If anyone can give me any advice on this, that would be great.

[jlmillionaire]

Is there anyone out there with s14 electrical knowledge I think I should just dl the fan

[jr_ss]

It's always a good idea to have the FSM available. That being said, get it. Did you replace the fuse? I know stupid question, but youd be surprised how many people forget the simple things. Get the FSM and figure out where the wires go and put them in the correct spot for starters.

[jlmillionaire]

yes i replaced the fuse i guess tmw im going to go every thing all the connections and trouble shoot the thing ugghhh

[Andres_G]

So your not getting any power at all?