jlmillionaire
11-05-2011, 02:54 PM
After recently getting my car back from a shop, the car would not start, but would have power to the ignition. I then went to remove the 100 amp fuse in the fuse panel in the engine bay, broke it - the legs were stuck - and then I removed the box that the fuse was in. I then disconnected the wires that were grounded to the fuses, 100 amp, etc. and I grounded the wires back, but I forgot how I took them off so I grounded them wherever. Now, I am not getting power to the ignition. This is all a result of jumping the battery and the two cables coming off the battery and touching each other, causing the battery to fry and other problems. If anyone can give me any advice on this, that would be great.