killer240
11-05-2011, 12:47 PM
brand new 300zx blank front rotors (for 30mm calipers) painted silver brake paint - $65 shipped
300zx used brake pads but lots of meat, the other set of pads is not pictured but same amount of life left - $80 shipped for the whole set
300zx front 30mm calipers and rears. i would only used it for cores unless you can take the pistons out and rebuild them. but on of the rears should only be used for core. $120 firm + shipping some of the pistons are out because i was planning to rebuild them but i changed my plans goin on a different route. i can separate them 90 shipped for fronts and 70 shipped for rears
(i actually think the rear caliper with damage is still good since theres going to be a seal on there)
i have a brand new rebuild kit for one of the rear calipers - $15
bumper extension - $15
clutch and fan - $30
headlight bracket $20
digital cluster thingy $20
headlight surround $10
manual mirror covers $10
2.5" couplers $10 each. i have 4
offer me a reasonable price for the U bends and straight pipe. i also have 4 ft straight pipes (x2) these are aluminum steel 16 gauge 2.5"
NOT PICTURED
energy bushing for rear control arm/knuckle bushings color red. i think i have 12. so it goes on your knuckles and 1 for each rear arms. so your set! $55 shipped
NRG slim hub - $OLD all the hardware are there and horn wire too
Brand new SS conversion lines $95 shipped for all corners
or $65 shipped for fronts or $55 shipped for rears
SR20 stock turbo elbow, plugged up with a nickle. off a S13 blacktop - $20
SR20 manifold heat shield, turbo heat shield (i have both 2 piece) $40 + shipping
RB20 brand new turbo elbow gasket, not sure if it works with 25. $15
RB20 brand new valve stems and front main seal? (not sure if its for the main seal, i forgot) see the pic later $25
RB20 turbo manifold heat shield $30
S13 shifter boot and ring that holds it down $25 shipped
S13 din pocket with brackets $25 shipped (you need to grind off/cut a piece to make it work)
http://farm7.static.flickr.com/6104/6247459528_bbc3daa2d5.jpg (http://www.flickr.com/photos/[email protected]/6247459528/)
IMG_3063 (http://www.flickr.com/photos/[email protected]/6247459528/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
http://farm7.static.flickr.com/6105/6246930561_c5be2eb522.jpg (http://www.flickr.com/photos/[email protected]/6246930561/)
IMG_3062 (http://www.flickr.com/photos/[email protected]/6246930561/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
http://farm7.static.flickr.com/6059/6246930555_ed53346ba0.jpg (http://www.flickr.com/photos/[email protected]/6246930555/)
IMG_3060 (http://www.flickr.com/photos/[email protected]/6246930555/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
http://farm7.static.flickr.com/6172/6246930559_2a008631f6.jpg (http://www.flickr.com/photos/[email protected]/6246930559/)
IMG_3061 (http://www.flickr.com/photos/[email protected]/6246930559/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
http://farm7.static.flickr.com/6157/6246930515_fd90e24ccb.jpg (http://www.flickr.com/photos/[email protected]/6246930515/)
IMG_3058 (http://www.flickr.com/photos/[email protected]/6246930515/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
this is how long the pipe is that you see in the picture above
http://farm7.static.flickr.com/6091/6246930539_261203e0e3.jpg (http://www.flickr.com/photos/[email protected]/6246930539/)
IMG_3059 (http://www.flickr.com/photos/[email protected]/6246930539/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
http://farm7.static.flickr.com/6161/6246930501_2d6ecfb8b4.jpg (http://www.flickr.com/photos/[email protected]/6246930501/)
IMG_3057 (http://www.flickr.com/photos/[email protected]/6246930501/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
300zx used brake pads but lots of meat, the other set of pads is not pictured but same amount of life left - $80 shipped for the whole set
300zx front 30mm calipers and rears. i would only used it for cores unless you can take the pistons out and rebuild them. but on of the rears should only be used for core. $120 firm + shipping some of the pistons are out because i was planning to rebuild them but i changed my plans goin on a different route. i can separate them 90 shipped for fronts and 70 shipped for rears
(i actually think the rear caliper with damage is still good since theres going to be a seal on there)
i have a brand new rebuild kit for one of the rear calipers - $15
bumper extension - $15
clutch and fan - $30
headlight bracket $20
digital cluster thingy $20
headlight surround $10
manual mirror covers $10
2.5" couplers $10 each. i have 4
offer me a reasonable price for the U bends and straight pipe. i also have 4 ft straight pipes (x2) these are aluminum steel 16 gauge 2.5"
NOT PICTURED
energy bushing for rear control arm/knuckle bushings color red. i think i have 12. so it goes on your knuckles and 1 for each rear arms. so your set! $55 shipped
NRG slim hub - $OLD all the hardware are there and horn wire too
Brand new SS conversion lines $95 shipped for all corners
or $65 shipped for fronts or $55 shipped for rears
SR20 stock turbo elbow, plugged up with a nickle. off a S13 blacktop - $20
SR20 manifold heat shield, turbo heat shield (i have both 2 piece) $40 + shipping
RB20 brand new turbo elbow gasket, not sure if it works with 25. $15
RB20 brand new valve stems and front main seal? (not sure if its for the main seal, i forgot) see the pic later $25
RB20 turbo manifold heat shield $30
S13 shifter boot and ring that holds it down $25 shipped
S13 din pocket with brackets $25 shipped (you need to grind off/cut a piece to make it work)
http://farm7.static.flickr.com/6104/6247459528_bbc3daa2d5.jpg (http://www.flickr.com/photos/[email protected]/6247459528/)
IMG_3063 (http://www.flickr.com/photos/[email protected]/6247459528/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
http://farm7.static.flickr.com/6105/6246930561_c5be2eb522.jpg (http://www.flickr.com/photos/[email protected]/6246930561/)
IMG_3062 (http://www.flickr.com/photos/[email protected]/6246930561/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
http://farm7.static.flickr.com/6059/6246930555_ed53346ba0.jpg (http://www.flickr.com/photos/[email protected]/6246930555/)
IMG_3060 (http://www.flickr.com/photos/[email protected]/6246930555/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
http://farm7.static.flickr.com/6172/6246930559_2a008631f6.jpg (http://www.flickr.com/photos/[email protected]/6246930559/)
IMG_3061 (http://www.flickr.com/photos/[email protected]/6246930559/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
http://farm7.static.flickr.com/6157/6246930515_fd90e24ccb.jpg (http://www.flickr.com/photos/[email protected]/6246930515/)
IMG_3058 (http://www.flickr.com/photos/[email protected]/6246930515/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
this is how long the pipe is that you see in the picture above
http://farm7.static.flickr.com/6091/6246930539_261203e0e3.jpg (http://www.flickr.com/photos/[email protected]/6246930539/)
IMG_3059 (http://www.flickr.com/photos/[email protected]/6246930539/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
http://farm7.static.flickr.com/6161/6246930501_2d6ecfb8b4.jpg (http://www.flickr.com/photos/[email protected]/6246930501/)
IMG_3057 (http://www.flickr.com/photos/[email protected]/6246930501/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr